From: Kameron Carr <kameroncarr@linux.microsoft.com>
To: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
decui@microsoft.com, longli@microsoft.com
Cc: catalin.marinas@arm.com, will@kernel.org, mark.rutland@arm.com,
lpieralisi@kernel.org, sudeep.holla@kernel.org, arnd@arndb.de,
thuth@redhat.com, linux-hyperv@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
mhklinux@outlook.com
Subject: [PATCH v2 1/6] arm64: rsi: Add RSI host call structure and helper function
Date: Thu, 25 Jun 2026 10:34:55 -0700 [thread overview]
Message-ID: <20260625173500.1995481-2-kameroncarr@linux.microsoft.com> (raw)
In-Reply-To: <20260625173500.1995481-1-kameroncarr@linux.microsoft.com>
Add struct rsi_host_call to rsi_smc.h, which represents the host call
data structure used by the Realm Management Monitor (RMM) for the
RSI_HOST_CALL interface. The structure contains a 16-bit immediate field
and 31 general-purpose register values, aligned to 256 bytes as required
by the CCA RMM specification.
Add rsi_host_call() static inline wrapper in rsi_cmds.h that invokes
SMC_RSI_HOST_CALL with the physical address of the host call structure.
This will be used by Hyper-V guest code to route hypercalls through the
RSI interface when running inside an Arm CCA Realm.
Signed-off-by: Kameron Carr <kameroncarr@linux.microsoft.com>
---
arch/arm64/include/asm/rsi_cmds.h | 22 ++++++++++++++++++++++
arch/arm64/include/asm/rsi_smc.h | 7 +++++++
2 files changed, 29 insertions(+)
diff --git a/arch/arm64/include/asm/rsi_cmds.h b/arch/arm64/include/asm/rsi_cmds.h
index 2c8763876dfb7..9daf8008e5da2 100644
--- a/arch/arm64/include/asm/rsi_cmds.h
+++ b/arch/arm64/include/asm/rsi_cmds.h
@@ -88,6 +88,28 @@ static inline long rsi_set_addr_range_state(phys_addr_t start,
return res.a0;
}
+/**
+ * rsi_host_call - Make a Host call.
+ * @host_call_struct: IPA of host call structure
+ *
+ * This call will fail if the IPA of the host call structure:
+ * * is not aligned to 256 bytes,
+ * * is not protected / encrypted,
+ * * is RIPAS_EMPTY
+ *
+ * Returns:
+ * On success, returns RSI_SUCCESS.
+ * Otherwise, returns an error code.
+ */
+static inline unsigned long rsi_host_call(phys_addr_t host_call_struct)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(SMC_RSI_HOST_CALL, host_call_struct, 0, 0, 0, 0, 0, 0,
+ &res);
+ return res.a0;
+}
+
/**
* rsi_attestation_token_init - Initialise the operation to retrieve an
* attestation token.
diff --git a/arch/arm64/include/asm/rsi_smc.h b/arch/arm64/include/asm/rsi_smc.h
index e19253f96c940..9cc57b5be0c02 100644
--- a/arch/arm64/include/asm/rsi_smc.h
+++ b/arch/arm64/include/asm/rsi_smc.h
@@ -142,6 +142,13 @@ struct realm_config {
*/
} __aligned(0x1000);
+struct rsi_host_call {
+ u16 immediate;
+ u8 _padding[6];
+ u64 gprs[31];
+} __aligned(256);
+static_assert(sizeof(struct rsi_host_call) == 256);
+
#endif /* __ASSEMBLER__ */
/*
--
2.45.4
next prev parent reply other threads:[~2026-06-25 17:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-25 17:34 [PATCH v2 0/6] arm64: hyperv: Add Realm support for Hyper-V Kameron Carr
2026-06-25 17:34 ` Kameron Carr [this message]
2026-06-25 17:34 ` [PATCH v2 2/6] firmware: smccc: Detect hypervisor via RSI host call in CCA Realms Kameron Carr
2026-06-25 17:54 ` sashiko-bot
2026-06-25 17:34 ` [PATCH v2 3/6] arm64: hyperv: Add per-CPU RSI host call infrastructure for " Kameron Carr
2026-06-25 17:49 ` sashiko-bot
2026-06-25 18:58 ` Michael Kelley
2026-06-25 17:34 ` [PATCH v2 4/6] Drivers: hv: Mark shared memory as decrypted " Kameron Carr
2026-06-25 17:50 ` sashiko-bot
2026-06-25 18:58 ` Michael Kelley
2026-06-26 11:08 ` Kameron Carr
2026-06-26 15:04 ` Michael Kelley
2026-06-25 17:34 ` [PATCH v2 5/6] arm64: hyperv: Route hypercalls through RSI host call in " Kameron Carr
2026-06-25 17:50 ` sashiko-bot
2026-06-25 17:35 ` [PATCH v2 6/6] arm64: hyperv: Implement hv_is_isolation_supported() for " Kameron Carr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260625173500.1995481-2-kameroncarr@linux.microsoft.com \
--to=kameroncarr@linux.microsoft.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=decui@microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=longli@microsoft.com \
--cc=lpieralisi@kernel.org \
--cc=mark.rutland@arm.com \
--cc=mhklinux@outlook.com \
--cc=sudeep.holla@kernel.org \
--cc=thuth@redhat.com \
--cc=wei.liu@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox