Linux-HyperV List
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Mukesh R" <mrathor@linux.microsoft.com>
Cc: linux-hyperv@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH v5 9/9] mshv: Disable movable regions upfront if device passthru
Date: Fri, 31 Jul 2026 22:57:53 +0000	[thread overview]
Message-ID: <20260731225754.411CB1F00AC4@smtp.kernel.org> (raw)
In-Reply-To: <20260731223427.2554388-10-mrathor@linux.microsoft.com>

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

New issues:
- [High] Bypass of memory pinning enforcement on device creation via `copy_to_user` failure.

Pre-existing issues:
- [High] Error paths in `mshv_map_user_memory` and `mshv_prepare_pinned_region` cause a NULL pointer dereference in `unpin_user_pages()`.
--

--- Patch [9]: [PATCH v5 9/9] mshv: Disable movable regions upfront if device passthru ---
commit 43489ca84b127042602836c2214d379f535126bf
Author: Mukesh R <mrathor@linux.microsoft.com>

mshv: Disable movable regions upfront if device passthru

If a VM is started with a device attached, the memory regions must be marked
non-movable to allow the use of SLAT for IOMMU. This commit introduces a
module parameter to pin regions upfront and updates the device creation ioctl
to mark regions as pinned when a device is passed through.

> diff --git a/drivers/hv/mshv_root_main.c b/drivers/hv/mshv_root_main.c
> --- a/drivers/hv/mshv_root_main.c
> +++ b/drivers/hv/mshv_root_main.c
[ ... ]
> @@ -1332,7 +1342,7 @@ static int mshv_partition_create_region(struct mshv_partition *partition,
>  
>  	if (is_mmio)
>  		rg->mreg_type = MSHV_REGION_TYPE_MMIO;
> -	else if (mshv_partition_encrypted(partition) ||
> +	else if (mshv_do_pt_regions_pinned(partition) ||
>  		 !mshv_region_movable_init(rg))
>  		rg->mreg_type = MSHV_REGION_TYPE_MEM_PINNED;

[Severity: High]
This is a pre-existing issue, but I noticed an error handling problem with
pinned regions that might be triggered more frequently now.

If pinning fails in mshv_map_user_memory(), we drop the reference:

mshv_map_user_memory() {
    ...
    errout:
        mshv_region_put(region);
        return ret;
}

This triggers mshv_region_destroy() which unconditionally invalidates the
region:

mshv_region_destroy() {
    ...
    mshv_region_invalidate(region);
    vfree(region);
}

If the region pages were already partially unpinned and NULLed out during
the pinning failure, mshv_region_invalidate_pages() will pass those NULL
pointers directly to unpin_user_pages():

mshv_region_invalidate_pages() {
    ...
    if (region->mreg_type == MSHV_REGION_TYPE_MEM_PINNED)
        unpin_user_pages(region->mreg_pages + page_offset, page_count);
}

Since unpin_user_pages() does not check for NULL pointers, does this
sequence result in a NULL pointer dereference when cleaning up after a
pinning failure?

[ ... ]
> @@ -1818,6 +1828,9 @@ static long mshv_partition_ioctl_create_device(struct mshv_partition *partition,
>  	if (copy_to_user(uarg, &devargk, sizeof(devargk)))
>  		return -EFAULT;    /* cleanup in mshv_device_fop_release() */
>  
> +	/* For now, just mark regions pinned if there is device passthru. */
> +	partition->pt_regions_pinned = true;
> +
>  	return 0;

[Severity: High]
If copy_to_user() fails here, we return -EFAULT, but the file descriptor
has already been installed into the process's file descriptor table via
anon_inode_getfd() and remains active. 

Could this allow userspace to bypass setting pt_regions_pinned to true
while successfully obtaining and using the device file descriptor? If a
process intentionally passes an invalid pointer, it seems it might be able
to map movable memory while still attaching a device.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260731223427.2554388-1-mrathor@linux.microsoft.com?part=9

      reply	other threads:[~2026-07-31 22:57 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-31 22:34 [PATCH v5 0/9] PCI passthru on Hyper-V Mukesh R
2026-07-31 22:34 ` [PATCH v5 1/9] mshv: Provide a way to get partition ID if running in a VMM process Mukesh R
2026-07-31 22:47   ` sashiko-bot
2026-07-31 22:34 ` [PATCH v5 2/9] mshv: Add declarations and definitions for VFIO-MSHV bridge device Mukesh R
2026-07-31 22:42   ` sashiko-bot
2026-07-31 22:34 ` [PATCH v5 3/9] mshv: Introduce basic mshv bridge device for VFIO to build upon Mukesh R
2026-07-31 22:49   ` sashiko-bot
2026-07-31 22:34 ` [PATCH v5 4/9] mshv: Add ioctl support for MSHV-VFIO bridge device Mukesh R
2026-07-31 22:49   ` sashiko-bot
2026-07-31 22:34 ` [PATCH v5 5/9] mshv: Import data structs around device passthru from hyperv headers Mukesh R
2026-07-31 22:45   ` sashiko-bot
2026-07-31 22:34 ` [PATCH v5 6/9] PCI: hv: Export hv_build_devid_type_pci() and change return type Mukesh R
2026-07-31 22:47   ` sashiko-bot
2026-07-31 22:34 ` [PATCH v5 7/9] x86/hyperv: Implement Hyper-V virtual IOMMU Mukesh R
2026-07-31 22:48   ` sashiko-bot
2026-07-31 22:34 ` [PATCH v5 8/9] mshv: Populate mmio mappings for PCI passthru Mukesh R
2026-07-31 22:54   ` sashiko-bot
2026-07-31 22:34 ` [PATCH v5 9/9] mshv: Disable movable regions upfront if device passthru Mukesh R
2026-07-31 22:57   ` sashiko-bot [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260731225754.411CB1F00AC4@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mrathor@linux.microsoft.com \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox