From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Michael Kelley <mikelley@microsoft.com>,
Siddharth Chandrasekaran <sidcha@amazon.de>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [PATCH v3 14/34] KVM: x86: Introduce .post_hv_l2_tlb_flush() nested hook
Date: Wed, 18 May 2022 14:43:07 +0200 [thread overview]
Message-ID: <871qwrui3o.fsf@redhat.com> (raw)
In-Reply-To: <deae695da02d7f22dcfa4635eec53ab61baf9026.camel@redhat.com>
Maxim Levitsky <mlevitsk@redhat.com> writes:
> On Thu, 2022-04-14 at 15:19 +0200, Vitaly Kuznetsov wrote:
>> Hyper-V supports injecting synthetic L2->L1 exit after performing
>> L2 TLB flush operation but the procedure is vendor specific.
>> Introduce .post_hv_l2_tlb_flush() nested hook for it.
>>
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>> ---
>> arch/x86/include/asm/kvm_host.h | 1 +
>> arch/x86/kvm/Makefile | 3 ++-
>> arch/x86/kvm/svm/hyperv.c | 11 +++++++++++
>> arch/x86/kvm/svm/hyperv.h | 2 ++
>> arch/x86/kvm/svm/nested.c | 1 +
>> arch/x86/kvm/vmx/evmcs.c | 4 ++++
>> arch/x86/kvm/vmx/evmcs.h | 1 +
>> arch/x86/kvm/vmx/nested.c | 1 +
>> 8 files changed, 23 insertions(+), 1 deletion(-)
>> create mode 100644 arch/x86/kvm/svm/hyperv.c
>>
>> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
>> index 8b2a52bf26c0..ce62fde5f4ff 100644
>> --- a/arch/x86/include/asm/kvm_host.h
>> +++ b/arch/x86/include/asm/kvm_host.h
>> @@ -1558,6 +1558,7 @@ struct kvm_x86_nested_ops {
>> int (*enable_evmcs)(struct kvm_vcpu *vcpu,
>> uint16_t *vmcs_version);
>> uint16_t (*get_evmcs_version)(struct kvm_vcpu *vcpu);
>> + void (*post_hv_l2_tlb_flush)(struct kvm_vcpu *vcpu);
>> };
>>
>> struct kvm_x86_init_ops {
>> diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
>> index 30f244b64523..b6d53b045692 100644
>> --- a/arch/x86/kvm/Makefile
>> +++ b/arch/x86/kvm/Makefile
>> @@ -25,7 +25,8 @@ kvm-intel-y += vmx/vmx.o vmx/vmenter.o vmx/pmu_intel.o vmx/vmcs12.o \
>> vmx/evmcs.o vmx/nested.o vmx/posted_intr.o
>> kvm-intel-$(CONFIG_X86_SGX_KVM) += vmx/sgx.o
>>
>> -kvm-amd-y += svm/svm.o svm/vmenter.o svm/pmu.o svm/nested.o svm/avic.o svm/sev.o
>> +kvm-amd-y += svm/svm.o svm/vmenter.o svm/pmu.o svm/nested.o svm/avic.o \
>> + svm/sev.o svm/hyperv.o
>>
>> ifdef CONFIG_HYPERV
>> kvm-amd-y += svm/svm_onhyperv.o
>> diff --git a/arch/x86/kvm/svm/hyperv.c b/arch/x86/kvm/svm/hyperv.c
>> new file mode 100644
>> index 000000000000..c0749fc282fe
>> --- /dev/null
>> +++ b/arch/x86/kvm/svm/hyperv.c
>> @@ -0,0 +1,11 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * AMD SVM specific code for Hyper-V on KVM.
>> + *
>> + * Copyright 2022 Red Hat, Inc. and/or its affiliates.
>> + */
>> +#include "hyperv.h"
>> +
>> +void svm_post_hv_l2_tlb_flush(struct kvm_vcpu *vcpu)
>> +{
>> +}
>> diff --git a/arch/x86/kvm/svm/hyperv.h b/arch/x86/kvm/svm/hyperv.h
>> index 8cf702fed7e5..a2b0d7580b0d 100644
>> --- a/arch/x86/kvm/svm/hyperv.h
>> +++ b/arch/x86/kvm/svm/hyperv.h
>> @@ -48,4 +48,6 @@ static inline void nested_svm_hv_update_vm_vp_ids(struct kvm_vcpu *vcpu)
>> hv_vcpu->nested.vp_id = hve->hv_vp_id;
>> }
>>
>> +void svm_post_hv_l2_tlb_flush(struct kvm_vcpu *vcpu);
>> +
>> #endif /* __ARCH_X86_KVM_SVM_HYPERV_H__ */
>> diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
>> index 2d1a76343404..de3f27301b5c 100644
>> --- a/arch/x86/kvm/svm/nested.c
>> +++ b/arch/x86/kvm/svm/nested.c
>> @@ -1665,4 +1665,5 @@ struct kvm_x86_nested_ops svm_nested_ops = {
>> .get_nested_state_pages = svm_get_nested_state_pages,
>> .get_state = svm_get_nested_state,
>> .set_state = svm_set_nested_state,
>> + .post_hv_l2_tlb_flush = svm_post_hv_l2_tlb_flush,
>> };
>> diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
>> index 87e3dc10edf4..e390e67496df 100644
>> --- a/arch/x86/kvm/vmx/evmcs.c
>> +++ b/arch/x86/kvm/vmx/evmcs.c
>> @@ -437,3 +437,7 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
>>
>> return 0;
>> }
>> +
>> +void vmx_post_hv_l2_tlb_flush(struct kvm_vcpu *vcpu)
>> +{
>> +}
>> diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h
>> index 8d70f9aea94b..b120b0ead4f3 100644
>> --- a/arch/x86/kvm/vmx/evmcs.h
>> +++ b/arch/x86/kvm/vmx/evmcs.h
>> @@ -244,5 +244,6 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
>> uint16_t *vmcs_version);
>> void nested_evmcs_filter_control_msr(u32 msr_index, u64 *pdata);
>> int nested_evmcs_check_controls(struct vmcs12 *vmcs12);
>> +void vmx_post_hv_l2_tlb_flush(struct kvm_vcpu *vcpu);
>>
>> #endif /* __KVM_X86_VMX_EVMCS_H */
>> diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
>> index ee88921c6156..cc6c944b5815 100644
>> --- a/arch/x86/kvm/vmx/nested.c
>> +++ b/arch/x86/kvm/vmx/nested.c
>> @@ -6850,4 +6850,5 @@ struct kvm_x86_nested_ops vmx_nested_ops = {
>> .write_log_dirty = nested_vmx_write_pml_buffer,
>> .enable_evmcs = nested_enable_evmcs,
>> .get_evmcs_version = nested_get_evmcs_version,
>> + .post_hv_l2_tlb_flush = vmx_post_hv_l2_tlb_flush,
>> };
>
>
> I think that the name of the function is misleading, since it is not called
> after each L2 HV tlb flush, but only after a flush which needs to inject
> that synthetic VM exit.
>
> I think something like 'inject_synthetic_l2_hv_tlb_flush_vmexit'
> (not a good name IMHO, but you get the idea) would be better.
>
Naming is hard indeed,
hv_inject_synthetic_vmexit_post_tlb_flush()
seems to be accurate.
--
Vitaly
next prev parent reply other threads:[~2022-05-18 12:47 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-14 13:19 [PATCH v3 00/34] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush feature Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 01/34] KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag Vitaly Kuznetsov
2022-05-11 11:18 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 02/34] KVM: x86: hyper-v: Introduce TLB flush ring Vitaly Kuznetsov
2022-05-11 11:19 ` Maxim Levitsky
2022-05-16 14:29 ` Vitaly Kuznetsov
2022-05-16 19:34 ` Sean Christopherson
2022-05-17 13:31 ` Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 03/34] KVM: x86: hyper-v: Add helper to read hypercall data for array Vitaly Kuznetsov
2022-05-11 11:20 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 04/34] KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently Vitaly Kuznetsov
2022-05-11 11:22 ` Maxim Levitsky
2022-05-18 9:39 ` Vitaly Kuznetsov
2022-05-18 14:18 ` Sean Christopherson
2022-05-18 14:43 ` Vitaly Kuznetsov
2022-05-18 14:55 ` Sean Christopherson
2022-05-16 19:41 ` Sean Christopherson
2022-05-17 13:41 ` Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 05/34] KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls Vitaly Kuznetsov
2022-05-11 11:23 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 06/34] KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs Vitaly Kuznetsov
2022-05-11 11:23 ` Maxim Levitsky
2022-05-11 11:23 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 07/34] x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants Vitaly Kuznetsov
2022-04-25 15:47 ` Wei Liu
2022-04-25 17:34 ` Michael Kelley (LINUX)
2022-04-25 19:09 ` Christophe JAILLET
2022-04-25 19:16 ` Christophe JAILLET
2022-05-03 14:59 ` Vitaly Kuznetsov
2022-05-03 11:11 ` Wei Liu
2022-05-11 11:23 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 08/34] KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw '64' Vitaly Kuznetsov
2022-05-11 11:24 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 09/34] KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi() Vitaly Kuznetsov
2022-05-11 11:24 ` Maxim Levitsky
2022-05-16 19:52 ` Sean Christopherson
2022-04-14 13:19 ` [PATCH v3 10/34] KVM: x86: hyper-v: Create a separate ring for L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:24 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 11/34] KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' Vitaly Kuznetsov
2022-05-11 11:25 ` Maxim Levitsky
2022-05-16 20:05 ` Sean Christopherson
2022-05-17 13:51 ` Vitaly Kuznetsov
2022-05-17 14:04 ` Sean Christopherson
2022-05-17 14:19 ` Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 12/34] KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use Vitaly Kuznetsov
2022-05-11 11:25 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 13/34] KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id Vitaly Kuznetsov
2022-05-11 11:27 ` Maxim Levitsky
2022-05-18 12:25 ` Vitaly Kuznetsov
2022-05-18 12:45 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 14/34] KVM: x86: Introduce .post_hv_l2_tlb_flush() nested hook Vitaly Kuznetsov
2022-05-11 11:32 ` Maxim Levitsky
2022-05-18 12:43 ` Vitaly Kuznetsov [this message]
2022-05-18 12:49 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 15/34] KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() Vitaly Kuznetsov
2022-05-11 11:25 ` Maxim Levitsky
2022-05-16 20:09 ` Sean Christopherson
2022-04-14 13:19 ` [PATCH v3 16/34] KVM: x86: hyper-v: L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:29 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 17/34] KVM: x86: hyper-v: Introduce fast kvm_hv_l2_tlb_flush_exposed() check Vitaly Kuznetsov
2022-05-11 11:30 ` Maxim Levitsky
2022-05-19 13:25 ` Vitaly Kuznetsov
2022-05-19 13:28 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 18/34] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-05-11 11:30 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 19/34] KVM: nVMX: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:31 ` Maxim Levitsky
2022-05-16 20:16 ` Sean Christopherson
2022-04-14 13:19 ` [PATCH v3 20/34] KVM: x86: KVM_REQ_TLB_FLUSH_CURRENT is a superset of KVM_REQ_HV_TLB_FLUSH too Vitaly Kuznetsov
2022-05-11 11:33 ` Maxim Levitsky
2022-05-19 9:12 ` Vitaly Kuznetsov
2022-05-19 23:44 ` Sean Christopherson
2022-04-14 13:20 ` [PATCH v3 21/34] KVM: nSVM: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:33 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 22/34] KVM: x86: Expose Hyper-V L2 TLB flush feature Vitaly Kuznetsov
2022-05-11 11:34 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 23/34] KVM: selftests: Better XMM read/write helpers Vitaly Kuznetsov
2022-05-11 11:34 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 24/34] KVM: selftests: Hyper-V PV IPI selftest Vitaly Kuznetsov
2022-05-11 11:35 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 25/34] KVM: selftests: Make it possible to replace PTEs with __virt_pg_map() Vitaly Kuznetsov
2022-05-11 11:34 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 26/34] KVM: selftests: Hyper-V PV TLB flush selftest Vitaly Kuznetsov
2022-05-11 12:17 ` Maxim Levitsky
2022-05-24 14:51 ` Vitaly Kuznetsov
2022-04-14 13:20 ` [PATCH v3 27/34] KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-05-11 12:17 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 28/34] KVM: selftests: nVMX: Allocate Hyper-V partition assist page Vitaly Kuznetsov
2022-05-11 12:17 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 29/34] KVM: selftests: nSVM: Allocate Hyper-V partition assist and VP assist pages Vitaly Kuznetsov
2022-05-11 12:17 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 30/34] KVM: selftests: Sync 'struct hv_vp_assist_page' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-05-11 12:18 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 31/34] KVM: selftests: evmcs_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-05-11 12:18 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 32/34] KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h Vitaly Kuznetsov
2022-05-11 12:18 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 33/34] KVM: selftests: hyperv_svm_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-05-11 12:19 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 34/34] KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush' Vitaly Kuznetsov
2022-05-11 12:18 ` Maxim Levitsky
2022-05-03 15:01 ` [PATCH v3 00/34] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush feature Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871qwrui3o.fsf@redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=sidcha@amazon.de \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).