From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Jim Mattson <jmattson@google.com>
Cc: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>,
Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
Wanpeng Li <wanpengli@tencent.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 16/28] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING in setup_vmcs_config()
Date: Thu, 30 Jun 2022 09:32:39 +0200 [thread overview]
Message-ID: <87wncysj1k.fsf@redhat.com> (raw)
In-Reply-To: <CALMp9eS_iAijAk4pdK1tjLbRp3XH-PhR1mX4gaSXztWPXJpfkA@mail.gmail.com>
Jim Mattson <jmattson@google.com> writes:
> On Wed, Jun 29, 2022 at 8:07 AM Vitaly Kuznetsov <vkuznets@redhat.com> wrote:
>>
>> SECONDARY_EXEC_ENCLS_EXITING is conditionally added to the 'optional'
>> checklist in setup_vmcs_config() but there's little value in doing so.
>> First, as the control is optional, we can always check for its
>> presence, no harm done. Second, the only real value cpu_has_sgx() check
>> gives is that on the CPUs which support SECONDARY_EXEC_ENCLS_EXITING but
>> don't support SGX, the control is not getting enabled. It's highly unlikely
>> such CPUs exist but it's possible that some hypervisors expose broken vCPU
>> models.
>>
>> Preserve cpu_has_sgx() check but filter the result of adjust_vmx_controls()
>> instead of the input.
>>
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>> ---
>> arch/x86/kvm/vmx/vmx.c | 9 ++++++---
>> 1 file changed, 6 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
>> index 89a3bbafa5af..e32d91006b80 100644
>> --- a/arch/x86/kvm/vmx/vmx.c
>> +++ b/arch/x86/kvm/vmx/vmx.c
>> @@ -2528,9 +2528,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
>> SECONDARY_EXEC_PT_CONCEAL_VMX |
>> SECONDARY_EXEC_ENABLE_VMFUNC |
>> SECONDARY_EXEC_BUS_LOCK_DETECTION |
>> - SECONDARY_EXEC_NOTIFY_VM_EXITING;
>> - if (cpu_has_sgx())
>> - opt2 |= SECONDARY_EXEC_ENCLS_EXITING;
>> + SECONDARY_EXEC_NOTIFY_VM_EXITING |
>> + SECONDARY_EXEC_ENCLS_EXITING;
>> +
>> if (adjust_vmx_controls(min2, opt2,
>> MSR_IA32_VMX_PROCBASED_CTLS2,
>> &_cpu_based_2nd_exec_control) < 0)
>> @@ -2577,6 +2577,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
>> vmx_cap->vpid = 0;
>> }
>>
>> + if (!cpu_has_sgx())
>> + _cpu_based_2nd_exec_control &= ~SECONDARY_EXEC_ENCLS_EXITING;
>
> NYC, but why is there a leading underscore here?
No idea to be honest, this goes way back to 2007 when
setup_vmcs_config() was introduced:
commit 1c3d14fe0ab75337a3f6c06b6bc18bcbc2b3d0bc
Author: Yang, Sheng <sheng.yang@intel.com>
Date: Sun Jul 29 11:07:42 2007 +0300
KVM: VMX: Improve the method of writing vmcs control
>
>> if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_TERTIARY_CONTROLS) {
>> u64 opt3 = TERTIARY_EXEC_IPI_VIRT;
>>
>> --
>> 2.35.3
>>
> Reviewed-by: Jim Mattson <jmattson@google.com>
>
Thanks!
--
Vitaly
next prev parent reply other threads:[~2022-06-30 7:32 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-29 15:05 [PATCH v2 00/28] KVM: VMX: Support TscScaling and EnclsExitingBitmap with eVMCS + use vmcs_config for L1 VMX MSRs Vitaly Kuznetsov
2022-06-29 15:05 ` [PATCH v2 01/28] KVM: x86: hyper-v: Expose access to debug MSRs in the partition privilege flags Vitaly Kuznetsov
2022-06-29 15:05 ` [PATCH v2 02/28] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 03/28] x86/hyperv: Update " Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 04/28] KVM: VMX: Define VMCS-to-EVMCS conversion for the new fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 05/28] KVM: nVMX: Support several new fields in eVMCSv1 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 06/28] KVM: nVMX: Introduce KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-07-06 21:35 ` Sean Christopherson
2022-07-07 9:58 ` Vitaly Kuznetsov
2022-07-07 16:17 ` Sean Christopherson
2022-07-07 16:40 ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 07/28] KVM: selftests: Switch to KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 08/28] KVM: VMX: Support TSC scaling with enlightened VMCS Vitaly Kuznetsov
2022-07-07 10:01 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 09/28] KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 10/28] KVM: selftests: Switch to updated eVMCSv1 definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 11/28] KVM: selftests: Enable TSC scaling in evmcs selftest Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 12/28] KVM: VMX: Enable VM_{EXIT,ENTRY}_LOAD_IA32_PERF_GLOBAL_CTRL for KVM on Hyper-V Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 13/28] KVM: VMX: Get rid of eVMCS specific VMX controls sanitization Vitaly Kuznetsov
2022-07-06 22:27 ` Sean Christopherson
2022-07-07 10:03 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 14/28] KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config() Vitaly Kuznetsov
2022-06-29 20:28 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 15/28] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING " Vitaly Kuznetsov
2022-07-01 3:58 ` Jim Mattson
2022-07-01 8:12 ` Vitaly Kuznetsov
2022-07-06 18:44 ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 16/28] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING " Vitaly Kuznetsov
2022-06-29 18:56 ` Jim Mattson
2022-06-30 7:32 ` Vitaly Kuznetsov [this message]
2022-06-29 15:06 ` [PATCH v2 17/28] KVM: VMX: Extend VMX controls macro shenanigans Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 18/28] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01 4:14 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 19/28] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-07-01 16:02 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 20/28] KVM: VMX: Add missing VMENTRY " Vitaly Kuznetsov
2022-07-01 16:01 ` Jim Mattson
2022-07-07 10:41 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 21/28] KVM: VMX: Add missing CPU based VM execution " Vitaly Kuznetsov
2022-07-01 16:05 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 22/28] KVM: VMX: Clear controls obsoleted by EPT at runtime, not setup Vitaly Kuznetsov
2022-07-01 16:11 ` Jim Mattson
2022-07-07 14:57 ` Vitaly Kuznetsov
2022-07-07 19:30 ` Sean Christopherson
2022-07-07 21:32 ` Jim Mattson
2022-07-07 21:39 ` Sean Christopherson
2022-07-07 23:12 ` Jim Mattson
2022-07-08 7:55 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 23/28] KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01 16:26 ` Jim Mattson
2022-07-07 12:07 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 24/28] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-07-01 22:54 ` Jim Mattson
2022-07-07 12:30 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 25/28] KVM: VMX: Store required-1 VMX controls in vmcs_config Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 26/28] KVM: nVMX: Use sanitized required-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 27/28] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Vitaly Kuznetsov
2022-06-29 18:33 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 28/28] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov
2022-06-29 18:37 ` Jim Mattson
2022-06-30 7:36 ` Vitaly Kuznetsov
2022-06-30 12:27 ` Jim Mattson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wncysj1k.fsf@redhat.com \
--to=vkuznets@redhat.com \
--cc=anrayabh@linux.microsoft.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).