linux-hyperv.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	Michael Kelley <mikelley@microsoft.com>,
	Siddharth Chandrasekaran <sidcha@amazon.de>,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [PATCH v3 02/34] KVM: x86: hyper-v: Introduce TLB flush ring
Date: Mon, 16 May 2022 16:29:42 +0200	[thread overview]
Message-ID: <87y1z1v9d5.fsf@redhat.com> (raw)
In-Reply-To: <fdcba8b4aed2956e9bfc92ada2170f481a85a362.camel@redhat.com>

Maxim Levitsky <mlevitsk@redhat.com> writes:

> On Thu, 2022-04-14 at 15:19 +0200, Vitaly Kuznetsov wrote:
>> To allow flushing individual GVAs instead of always flushing the whole
>> VPID a per-vCPU structure to pass the requests is needed. Introduce a
>> simple ring write-locked structure to hold two types of entries:
>> individual GVA (GFN + up to 4095 following GFNs in the lower 12 bits)
>> and 'flush all'.
>> 
>> The queuing rule is: if there's not enough space on the ring to put
>> the request and leave at least 1 entry for 'flush all' - put 'flush
>> all' entry.
>> 
>> The size of the ring is arbitrary set to '16'.
>> 
>> Note, kvm_hv_flush_tlb() only queues 'flush all' entries for now so
>> there's very small functional change but the infrastructure is
>> prepared to handle individual GVA flush requests.
>
> As I see from this patch, also the code doesn't process the requests
> from the ring buffer yet, but rather just ignores it completely,
> and resets the whole ring buffer (kvm_hv_vcpu_empty_flush_tlb)
> Maybe you should mention it here.
>
>
>> 
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>> ---
>>  arch/x86/include/asm/kvm_host.h | 16 +++++++
>>  arch/x86/kvm/hyperv.c           | 83 +++++++++++++++++++++++++++++++++
>>  arch/x86/kvm/hyperv.h           | 13 ++++++
>>  arch/x86/kvm/x86.c              |  5 +-
>>  arch/x86/kvm/x86.h              |  1 +
>>  5 files changed, 116 insertions(+), 2 deletions(-)
>> 
>> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
>> index 1de3ad9308d8..b4dd2ff61658 100644
>> --- a/arch/x86/include/asm/kvm_host.h
>> +++ b/arch/x86/include/asm/kvm_host.h
>> @@ -578,6 +578,20 @@ struct kvm_vcpu_hv_synic {
>>  	bool dont_zero_synic_pages;
>>  };
>>  
>> +#define KVM_HV_TLB_FLUSH_RING_SIZE (16)
>> +
>> +struct kvm_vcpu_hv_tlb_flush_entry {
>> +	u64 addr;
>> +	u64 flush_all:1;
>> +	u64 pad:63;
>> +};
>
> Have you considered using kfifo.h library instead?
>

As a matter of fact I have not and this is a good suggestion,
actually. Let me try to use it instead of my home-brewed ring. I'll
address your other comments after that. Thanks!

-- 
Vitaly


  reply	other threads:[~2022-05-16 14:29 UTC|newest]

Thread overview: 102+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-14 13:19 [PATCH v3 00/34] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush feature Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 01/34] KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag Vitaly Kuznetsov
2022-05-11 11:18   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 02/34] KVM: x86: hyper-v: Introduce TLB flush ring Vitaly Kuznetsov
2022-05-11 11:19   ` Maxim Levitsky
2022-05-16 14:29     ` Vitaly Kuznetsov [this message]
2022-05-16 19:34   ` Sean Christopherson
2022-05-17 13:31     ` Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 03/34] KVM: x86: hyper-v: Add helper to read hypercall data for array Vitaly Kuznetsov
2022-05-11 11:20   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 04/34] KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently Vitaly Kuznetsov
2022-05-11 11:22   ` Maxim Levitsky
2022-05-18  9:39     ` Vitaly Kuznetsov
2022-05-18 14:18       ` Sean Christopherson
2022-05-18 14:43         ` Vitaly Kuznetsov
2022-05-18 14:55           ` Sean Christopherson
2022-05-16 19:41   ` Sean Christopherson
2022-05-17 13:41     ` Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 05/34] KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls Vitaly Kuznetsov
2022-05-11 11:23   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 06/34] KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs Vitaly Kuznetsov
2022-05-11 11:23   ` Maxim Levitsky
2022-05-11 11:23   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 07/34] x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants Vitaly Kuznetsov
2022-04-25 15:47   ` Wei Liu
2022-04-25 17:34     ` Michael Kelley (LINUX)
2022-04-25 19:09   ` Christophe JAILLET
2022-04-25 19:16   ` Christophe JAILLET
2022-05-03 14:59     ` Vitaly Kuznetsov
2022-05-03 11:11   ` Wei Liu
2022-05-11 11:23   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 08/34] KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw '64' Vitaly Kuznetsov
2022-05-11 11:24   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 09/34] KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi() Vitaly Kuznetsov
2022-05-11 11:24   ` Maxim Levitsky
2022-05-16 19:52     ` Sean Christopherson
2022-04-14 13:19 ` [PATCH v3 10/34] KVM: x86: hyper-v: Create a separate ring for L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:24   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 11/34] KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' Vitaly Kuznetsov
2022-05-11 11:25   ` Maxim Levitsky
2022-05-16 20:05   ` Sean Christopherson
2022-05-17 13:51     ` Vitaly Kuznetsov
2022-05-17 14:04       ` Sean Christopherson
2022-05-17 14:19         ` Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 12/34] KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use Vitaly Kuznetsov
2022-05-11 11:25   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 13/34] KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id Vitaly Kuznetsov
2022-05-11 11:27   ` Maxim Levitsky
2022-05-18 12:25     ` Vitaly Kuznetsov
2022-05-18 12:45       ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 14/34] KVM: x86: Introduce .post_hv_l2_tlb_flush() nested hook Vitaly Kuznetsov
2022-05-11 11:32   ` Maxim Levitsky
2022-05-18 12:43     ` Vitaly Kuznetsov
2022-05-18 12:49       ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 15/34] KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() Vitaly Kuznetsov
2022-05-11 11:25   ` Maxim Levitsky
2022-05-16 20:09   ` Sean Christopherson
2022-04-14 13:19 ` [PATCH v3 16/34] KVM: x86: hyper-v: L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:29   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 17/34] KVM: x86: hyper-v: Introduce fast kvm_hv_l2_tlb_flush_exposed() check Vitaly Kuznetsov
2022-05-11 11:30   ` Maxim Levitsky
2022-05-19 13:25     ` Vitaly Kuznetsov
2022-05-19 13:28       ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 18/34] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-05-11 11:30   ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 19/34] KVM: nVMX: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:31   ` Maxim Levitsky
2022-05-16 20:16     ` Sean Christopherson
2022-04-14 13:19 ` [PATCH v3 20/34] KVM: x86: KVM_REQ_TLB_FLUSH_CURRENT is a superset of KVM_REQ_HV_TLB_FLUSH too Vitaly Kuznetsov
2022-05-11 11:33   ` Maxim Levitsky
2022-05-19  9:12     ` Vitaly Kuznetsov
2022-05-19 23:44       ` Sean Christopherson
2022-04-14 13:20 ` [PATCH v3 21/34] KVM: nSVM: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:33   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 22/34] KVM: x86: Expose Hyper-V L2 TLB flush feature Vitaly Kuznetsov
2022-05-11 11:34   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 23/34] KVM: selftests: Better XMM read/write helpers Vitaly Kuznetsov
2022-05-11 11:34   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 24/34] KVM: selftests: Hyper-V PV IPI selftest Vitaly Kuznetsov
2022-05-11 11:35   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 25/34] KVM: selftests: Make it possible to replace PTEs with __virt_pg_map() Vitaly Kuznetsov
2022-05-11 11:34   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 26/34] KVM: selftests: Hyper-V PV TLB flush selftest Vitaly Kuznetsov
2022-05-11 12:17   ` Maxim Levitsky
2022-05-24 14:51     ` Vitaly Kuznetsov
2022-04-14 13:20 ` [PATCH v3 27/34] KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-05-11 12:17   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 28/34] KVM: selftests: nVMX: Allocate Hyper-V partition assist page Vitaly Kuznetsov
2022-05-11 12:17   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 29/34] KVM: selftests: nSVM: Allocate Hyper-V partition assist and VP assist pages Vitaly Kuznetsov
2022-05-11 12:17   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 30/34] KVM: selftests: Sync 'struct hv_vp_assist_page' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-05-11 12:18   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 31/34] KVM: selftests: evmcs_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-05-11 12:18   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 32/34] KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h Vitaly Kuznetsov
2022-05-11 12:18   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 33/34] KVM: selftests: hyperv_svm_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-05-11 12:19   ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 34/34] KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush' Vitaly Kuznetsov
2022-05-11 12:18   ` Maxim Levitsky
2022-05-03 15:01 ` [PATCH v3 00/34] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush feature Vitaly Kuznetsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87y1z1v9d5.fsf@redhat.com \
    --to=vkuznets@redhat.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mikelley@microsoft.com \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=sidcha@amazon.de \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).