From: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
To: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>,
"K. Y. Srinivasan" <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
Wei Liu <wei.liu@kernel.org>, Dexuan Cui <decui@microsoft.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/4] drivers/clocksource/hyper-v: Introduce TSC MSR register structure
Date: Wed, 2 Nov 2022 18:46:14 +0530 [thread overview]
Message-ID: <Y2Jtnsh1Dcjwlrlz@anrayabh-desk> (raw)
In-Reply-To: <166732386986.9827.12356845572628674464.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net>
Please update the patch title since this doesn't introduce the TSC MSR
register structure.
Thanks,
Anirudh.
On Tue, Nov 01, 2022 at 05:31:09PM +0000, Stanislav Kinsburskii wrote:
> From: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
>
> And rework the code to use it instead of the physical address.
> This is a cleanup and precursor patch for upcoming support for TSC page
> mapping into hyper-v root partition.
>
> Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
> CC: "K. Y. Srinivasan" <kys@microsoft.com>
> CC: Haiyang Zhang <haiyangz@microsoft.com>
> CC: Wei Liu <wei.liu@kernel.org>
> CC: Dexuan Cui <decui@microsoft.com>
> CC: Daniel Lezcano <daniel.lezcano@linaro.org>
> CC: Thomas Gleixner <tglx@linutronix.de>
> CC: linux-hyperv@vger.kernel.org
> CC: linux-kernel@vger.kernel.org
> ---
> drivers/clocksource/hyperv_timer.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
> index c4dbf40a3d3e..d447bc99a399 100644
> --- a/drivers/clocksource/hyperv_timer.c
> +++ b/drivers/clocksource/hyperv_timer.c
> @@ -367,6 +367,12 @@ static union {
> } tsc_pg __aligned(PAGE_SIZE);
>
> static struct ms_hyperv_tsc_page *tsc_page = &tsc_pg.page;
> +static unsigned long tsc_pfn;
> +
> +static unsigned long hv_get_tsc_pfn(void)
> +{
> + return tsc_pfn;
> +}
>
> struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
> {
> @@ -408,13 +414,12 @@ static void suspend_hv_clock_tsc(struct clocksource *arg)
>
> static void resume_hv_clock_tsc(struct clocksource *arg)
> {
> - phys_addr_t phys_addr = virt_to_phys(tsc_page);
> union hv_reference_tsc_msr tsc_msr;
>
> /* Re-enable the TSC page */
> tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
> tsc_msr.enable = 1;
> - tsc_msr.pfn = __phys_to_pfn(phys_addr);
> + tsc_msr.pfn = tsc_pfn;
> hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
> }
>
> @@ -498,7 +503,6 @@ static __always_inline void hv_setup_sched_clock(void *sched_clock) {}
> static bool __init hv_init_tsc_clocksource(void)
> {
> union hv_reference_tsc_msr tsc_msr;
> - phys_addr_t phys_addr;
>
> if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
> return false;
> @@ -523,7 +527,7 @@ static bool __init hv_init_tsc_clocksource(void)
> }
>
> hv_read_reference_counter = read_hv_clock_tsc;
> - phys_addr = virt_to_phys(hv_get_tsc_page());
> + tsc_pfn = __phys_to_pfn(virt_to_phys(tsc_page));
>
> /*
> * The Hyper-V TLFS specifies to preserve the value of reserved
> @@ -534,7 +538,7 @@ static bool __init hv_init_tsc_clocksource(void)
> */
> tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
> tsc_msr.enable = 1;
> - tsc_msr.pfn = __phys_to_pfn(phys_addr);
> + tsc_msr.pfn = tsc_pfn;
> hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
>
> clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
>
next prev parent reply other threads:[~2022-11-02 13:17 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-01 17:30 [PATCH 0/4] hyper-v: Introduce TSC page for root partition Stanislav Kinsburskii
2022-11-01 17:31 ` [PATCH 1/4] drivers/clocksource/hyper-v: Introduce a pointer to TSC page Stanislav Kinsburskii
2022-11-02 18:56 ` Michael Kelley (LINUX)
[not found] ` <CA+DrgLxD8X3cjFNAXYjxr-1opJG_uzU-Ajvz_poMccaiANtQ3g@mail.gmail.com>
2022-11-02 20:44 ` Michael Kelley (LINUX)
2022-11-01 17:31 ` [PATCH 2/4] drivers/clocksource/hyper-v: Introduce TSC MSR register structure Stanislav Kinsburskii
2022-11-02 13:16 ` Anirudh Rayabharam [this message]
2022-11-02 18:57 ` Michael Kelley (LINUX)
2022-11-02 19:06 ` Michael Kelley (LINUX)
[not found] ` <CA+DrgLzYpFHUzYmvP_qhTMkaYhjRsgW3eaQfMYYpGiE2AHzjLw@mail.gmail.com>
2022-11-02 20:30 ` Michael Kelley (LINUX)
[not found] ` <CA+DrgLzLATDPvO-Ngi5O5kMx-zqBVYtx+GmM=8E5y3P1X0fMsw@mail.gmail.com>
2022-11-02 21:27 ` Michael Kelley (LINUX)
2022-11-02 21:49 ` Stanislav Kinsburskii
2022-11-01 17:31 ` [PATCH 3/4] drivers/clocksource/hyper-v: Use TSC PFN getter to map vvar page Stanislav Kinsburskii
2022-11-02 12:45 ` Wei Liu
[not found] ` <CA+DrgLzxmjWg0-Zvg6gf+vm2EisPYJozC64Y8aZAqkvvn-c7Zw@mail.gmail.com>
2022-11-02 20:03 ` Wei Liu
2022-11-01 17:31 ` [PATCH 4/4] drivers/clocksource/hyper-v: Add TSC page support for root partition Stanislav Kinsburskii
2022-11-02 13:18 ` Anirudh Rayabharam
2022-11-02 19:13 ` Michael Kelley (LINUX)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y2Jtnsh1Dcjwlrlz@anrayabh-desk \
--to=anrayabh@linux.microsoft.com \
--cc=daniel.lezcano@linaro.org \
--cc=decui@microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=skinsburskii@linux.microsoft.com \
--cc=stanislav.kinsburskiy@gmail.com \
--cc=tglx@linutronix.de \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox