From: sashiko-bot@kernel.org
To: "Julius Bairaktaris" <julius@bairaktaris.de>,
linux-hyperv@vger.kernel.org
Subject: Re: [PATCH net] hv_netvsc: fall back to one queue when a sub channel fails to open
Date: Sun, 15 Nov 2026 22:04:05 +0000 [thread overview]
Message-ID: <sashiko-outbox-215875@kernel.org> (raw)
In-Reply-To: <20261114220358.5429-1-julius@bairaktaris.de>
Thank you for your contribution! Sashiko AI review found 3 potential
issues to consider:
- [High] hv_netvsc: UAF and primary-channel false match in
rndis_subchannel_opened()
- [Medium] hv_netvsc: clamping max_chn to 1 on fallback blocks ethtool
-L recovery
- [Medium] hv_netvsc: stale multi-queue rx_table after
rndis_set_subchannel() fallback
It also noticed 1 related pre-existing issue this patch does not
introduce:
- [High] Drivers: hv: vmbus: skipped sub-channel callback in
vmbus_add_channel_work() [1]
--
commit 616fd3140681fc7618c2c8a9fe6e8fd4a476a8d1
Author: Julius Bairaktaris <julius@bairaktaris.de>
hv_netvsc: fall back to one queue when a sub channel fails to open
This commit checks whether all VMBus sub-channels opened during
rndis_set_subchannel() and falls back to a single queue, disabling and
deleting sub-channel NAPIs, if any sub-channel failed to open.
Link: https://github.com/microsoft/WSL/issues/41622
> diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
> index 1d43c73fd73f1..ffa5999dc576c 100644
> --- a/drivers/net/hyperv/netvsc_drv.c
> +++ b/drivers/net/hyperv/netvsc_drv.c
> @@ -1023,7 +1023,7 @@ static int netvsc_attach(struct net_device *ndev,
> struct netvsc_device *nvdev;
> struct rndis_device *rdev;
> struct bpf_prog *prog;
> - int ret = 0;
> + int i, ret = 0;
>
> nvdev = rndis_filter_device_add(hdev, dev_info);
> if (IS_ERR(nvdev))
> @@ -1034,8 +1034,13 @@ static int netvsc_attach(struct net_device *ndev,
>
> /* if unavailable, just proceed with one queue */
> if (ret) {
> + for (i = 1; i < nvdev->num_chn; i++)
> + netif_napi_del(&nvdev->chan_table[i].napi);
> +
> nvdev->max_chn = 1;
> nvdev->num_chn = 1;
> + netif_set_real_num_tx_queues(ndev, 1);
> + netif_set_real_num_rx_queues(ndev, 1);
> }
> }
[Severity: Medium]
Does keeping nvdev->max_chn = 1 here and in netvsc_subchan_work() prevent
raising the channel count back above 1 with ethtool -L after a fallback,
contrary to the commit message?
netvsc_get_channels() reports nvdev->max_chn as channel->max_combined, and
both ethnl_set_channels() and netvsc_set_channels() reject any requested
channel count greater than max_chn with -EINVAL unless another full
reattach (such as an MTU change) happens first to recompute max_chn in
rndis_filter_device_add().
> diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
> index 9622513275069..fe5acce0bb06b 100644
> --- a/drivers/net/hyperv/rndis_filter.c
> +++ b/drivers/net/hyperv/rndis_filter.c
> @@ -1278,6 +1278,31 @@ static void netvsc_sc_open(struct vmbus_channel *new_sc)
> wake_up(&nvscdev->subchan_open);
> }
>
> +static bool rndis_subchannel_opened(struct netvsc_device *nvdev, int i)
> +{
> + struct vmbus_channel *chn = nvdev->chan_table[i].channel;
> +
> + return chn && chn->state == CHANNEL_OPENED_STATE;
> +}
[Severity: High]
Can rndis_subchannel_opened() dereference a freed vmbus_channel or falsely
match the primary channel?
netvsc_sc_open() assigns nvchan->channel = new_sc before calling
vmbus_open(), and leaves it set if vmbus_open() fails (leaving new_sc in
CHANNEL_OPEN_STATE). If that sub-channel is rescinded,
vmbus_onoffer_rescind() sees CHANNEL_OPEN_STATE and immediately frees the
channel once probe_done is set:
CPU0 CPU1
rndis_set_subchannel() vmbus_add_channel_work()
wait_event(nvdev->subchan_open, ...) netvsc_sc_open()
nvchan->channel = new_sc
vmbus_open(new_sc) -> fails
atomic_inc_return(&open_chn)
newchannel->probe_done = true
vmbus_onoffer_rescind()
hv_process_channel_removal()
...
kfree_rcu(channel, rcu)
rndis_subchannel_opened()
chn->state <-- use-after-free
In addition, netvsc_device_add() initializes every
nvdev->chan_table[i].channel slot to the primary channel (device->channel),
which is in CHANNEL_OPENED_STATE. If any slot was not overwritten by
netvsc_sc_open(), rndis_subchannel_opened() returns true for the primary
channel and rndis_disable_subchannels() hangs in napi_disable() on a
sub-channel NAPI that was never enabled.
Clearing nvchan->channel = NULL when vmbus_open() fails in
netvsc_sc_open() and checking is_sub_channel(chn) would avoid both issues.
> +
> +/* Disable the NAPI of the sub channels that opened. netvsc_sc_open()
> + * already disabled it on the others.
> + */
> +static void rndis_disable_subchannels(struct net_device *ndev,
> + struct netvsc_device *nvdev)
> +{
> + int i;
> +
> + for (i = 1; i < nvdev->num_chn; i++) {
> + if (!rndis_subchannel_opened(nvdev, i))
> + continue;
> +
> + netif_queue_set_napi(ndev, i, NETDEV_QUEUE_TYPE_TX, NULL);
> + netif_queue_set_napi(ndev, i, NETDEV_QUEUE_TYPE_RX, NULL);
> + napi_disable(&nvdev->chan_table[i].napi);
> + }
> +}
[Severity: Medium]
When falling back to one queue here, does ndc->rx_table retain the
multi-queue indices populated earlier by rndis_filter_device_add()?
Because ndc->rx_table is not reset to queue 0 and the opened sub-channels
remain in CHANNEL_OPENED_STATE, ethtool -x reports nonexistent queue
indices, and updating the RSS hash key via ethtool -X (netvsc_set_rxfh()
with rxfh->indir == NULL) sends that multi-queue indirection table to the
host via rndis_filter_set_rss_param(), steering RX traffic onto
sub-channels whose NAPIs have been disabled and deleted.
> @@ -1329,6 +1354,19 @@ int rndis_set_subchannel(struct net_device *ndev,
> wait_event(nvdev->subchan_open,
> atomic_read(&nvdev->open_chn) == nvdev->num_chn);
[Severity: High]
This problem wasn't introduced by this patch, but can wait_event() on
nvdev->subchan_open hang forever under rtnl_lock if
vmbus_add_channel_kobj() fails in vmbus_add_channel_work() [1]?
drivers/hv/channel_mgmt.c:vmbus_add_channel_work() {
if (primary_channel != NULL) {
/* newchannel is a sub-channel. */
struct hv_device *dev = primary_channel->device_obj;
if (vmbus_add_channel_kobj(dev, newchannel))
goto err_deq_chan;
if (primary_channel->sc_creation_callback != NULL)
primary_channel->sc_creation_callback(newchannel);
}
When vmbus_add_channel_kobj() fails for a sub-channel offer, jumping to
err_deq_chan skips sc_creation_callback (netvsc_sc_open()), so
nvdev->open_chn is never incremented to nvdev->num_chn and
rndis_set_subchannel() sleeps indefinitely while holding rtnl_lock.
[1] https://sashiko.dev/#/bug/linux-83f4f08e-02b2-4a16-8ce7-6803e9b794d6
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261114220358.5429-1-julius@bairaktaris.de?part=1
prev parent reply other threads:[~2026-11-15 22:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-14 22:03 [PATCH net] hv_netvsc: fall back to one queue when a sub channel fails to open Julius Bairaktaris
2026-11-15 22:04 ` sashiko-bot [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-215875@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=julius@bairaktaris.de \
--cc=linux-hyperv@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox