From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications Date: Sun, 1 Jan 2017 12:19:40 +0100 Message-ID: <054b52de-40fd-a879-7b8e-2d25fed18840@redhat.com> References: <20161214135525.16477-1-hdegoede@redhat.com> <1f31b2e7-90fa-0fb8-5f6e-a8ee2ddf69f7@kernel.org> <20161230101501.06958c0d@jacob-builder> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20161230101501.06958c0d@jacob-builder> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Jacob Pan , Jonathan Cameron Cc: Chen-Yu Tsai , Lars-Peter Clausen , Peter Meerwald-Stadler , "russianneuromancer @ ya . ru" , linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-i2c@vger.kernel.org Hi, On 30-12-16 19:15, Jacob Pan wrote: > On Fri, 30 Dec 2016 16:46:03 +0000 > Jonathan Cameron wrote: > >> On 14/12/16 13:55, Hans de Goede wrote: >>> For some reason the axp288_adc driver was modifying the >>> AXP288_ADC_TS_PIN_CTRL register, changing bits 0-1 depending on >>> whether the GP_ADC channel or another channel was written. >>> >>> These bits control when a bias current is send to the TS_PIN, the >>> GP_ADC has its own pin and a separate bit in another register to >>> control the bias current. >>> > It has been a while. Just looked at the datasheet, reg 84h is for ADC > and TS pin control. IIRC, we had to set the TS bits in order to make > ADC read to work. The bits the code I'm removing are manipulating are bits 0 & 1 of reg 84h which are: 1-0 Current source from TS pin on/off enable bit [1:0] 00: off 01: on when charging battery, off when not charging 10: on in ADC phase and off when out of the ADC phase, for power saving 11: always on And they are being toggled between 10 and 11, so in both cases the current source is enabled when reading the adc value. Specifically the code this patch removes are setting these bits to 10 before reading and back to 11 after reading, which makes no sense. And to make things even funkier, this manipulation is only done when reading the GP_ADC, which is the ADC function of GPIO0, whereas these bits control the bias current source for the TS pin, which is a completely different pin. So all in all this entire bit of code seems to be big NOP. > What is the other register? The register to actually enable / disable the bias current source for GPIO0 / the GPADC pin is register 85h, where setting bit 2 enables the GPIO0 output current. Regards, Hans >>> Not only does changing when to enable the TS_PIN bias current >>> (always or only when sampling) when reading the GP_ADC make no sense >>> at all, the code is modifying these bits is writing the entire >>> register, assuming that all the other bits have their default value. >>> > Agreed, it would be better to do read-modify-write and not to > touch the other bits. >>> So if the firmware has configured a different bias-current for >>> either pin, then that change gets clobbered by the write, likewise >>> if the firmware has set bit 2 to indicate that the battery has no >>> thermal sensor, this will get clobbered by the write. >>> >>> This commit fixes all this, by simply removing all writes to the >>> AXP288_ADC_TS_PIN_CTRL register, they are not needed to read the >>> GP_ADC pin, and can actually be harmful. >>> >>> Signed-off-by: Hans de Goede >> I guess you probably have more up to date contact details than I do, >> but seems worth trying to cc Jacob Pan on this to see if we can find >> out what the original reasoning behind this was. Seems a very odd >> thing to do with no purpose! >> >> If Jacob isn't contactable we'll fall back to guessing it was just >> an oddity of driver evolution. >> >> Jonathan >>> --- >>> drivers/iio/adc/axp288_adc.c | 32 +------------------------------- >>> 1 file changed, 1 insertion(+), 31 deletions(-) >>> >>> diff --git a/drivers/iio/adc/axp288_adc.c >>> b/drivers/iio/adc/axp288_adc.c index 7fd2494..64799ad 100644 >>> --- a/drivers/iio/adc/axp288_adc.c >>> +++ b/drivers/iio/adc/axp288_adc.c >>> @@ -28,8 +28,6 @@ >>> #include >>> >>> #define AXP288_ADC_EN_MASK 0xF1 >>> -#define AXP288_ADC_TS_PIN_GPADC 0xF2 >>> -#define AXP288_ADC_TS_PIN_ON 0xF3 >>> >>> enum axp288_adc_id { >>> AXP288_ADC_TS, >>> @@ -123,16 +121,6 @@ static int axp288_adc_read_channel(int *val, >>> unsigned long address, return IIO_VAL_INT; >>> } >>> >>> -static int axp288_adc_set_ts(struct regmap *regmap, unsigned int >>> mode, >>> - unsigned long address) >>> -{ >>> - /* channels other than GPADC do not need to switch TS pin >>> */ >>> - if (address != AXP288_GP_ADC_H) >>> - return 0; >>> - >>> - return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode); >>> -} >>> - >>> static int axp288_adc_read_raw(struct iio_dev *indio_dev, >>> struct iio_chan_spec const *chan, >>> int *val, int *val2, long mask) >>> @@ -143,16 +131,7 @@ static int axp288_adc_read_raw(struct iio_dev >>> *indio_dev, mutex_lock(&indio_dev->mlock); >>> switch (mask) { >>> case IIO_CHAN_INFO_RAW: >>> - if (axp288_adc_set_ts(info->regmap, >>> AXP288_ADC_TS_PIN_GPADC, >>> - chan->address)) { >>> - dev_err(&indio_dev->dev, "GPADC mode\n"); >>> - ret = -EINVAL; >>> - break; >>> - } >>> ret = axp288_adc_read_channel(val, chan->address, >>> info->regmap); >>> - if (axp288_adc_set_ts(info->regmap, >>> AXP288_ADC_TS_PIN_ON, >>> - chan->address)) >>> - dev_err(&indio_dev->dev, "TS pin >>> restore\n"); break; >>> default: >>> ret = -EINVAL; >>> @@ -162,15 +141,6 @@ static int axp288_adc_read_raw(struct iio_dev >>> *indio_dev, return ret; >>> } >>> >>> -static int axp288_adc_set_state(struct regmap *regmap) >>> -{ >>> - /* ADC should be always enabled for internal FG to >>> function */ >>> - if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, >>> AXP288_ADC_TS_PIN_ON)) >>> - return -EIO; >>> - >>> - return regmap_write(regmap, AXP20X_ADC_EN1, >>> AXP288_ADC_EN_MASK); -} >>> - >>> static const struct iio_info axp288_adc_iio_info = { >>> .read_raw = &axp288_adc_read_raw, >>> .driver_module = THIS_MODULE, >>> @@ -199,7 +169,7 @@ static int axp288_adc_probe(struct >>> platform_device *pdev) >>> * Set ADC to enabled state at all time, including system >>> suspend. >>> * otherwise internal fuel gauge functionality may be >>> affected. */ >>> - ret = axp288_adc_set_state(axp20x->regmap); >>> + ret = regmap_write(info->regmap, AXP20X_ADC_EN1, >>> AXP288_ADC_EN_MASK); if (ret) { >>> dev_err(&pdev->dev, "unable to enable ADC >>> device\n"); return ret; >>> >> > > [Jacob Pan] >