From: Heiner Kallweit <hkallweit1@gmail.com>
To: Jean Delvare <jdelvare@suse.com>
Cc: "linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>
Subject: [PATCH v2 10/10] i2c: i801: call i801_check_post() from i801_access()
Date: Mon, 19 Dec 2022 19:22:42 +0100 [thread overview]
Message-ID: <0a170b74-c105-7ca3-9811-a370c81462b8@gmail.com> (raw)
In-Reply-To: <8db86d89-d083-2a65-76a1-6db34f433604@gmail.com>
Avoid code duplication by calling i801_check_post() from i801_access().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/i2c/busses/i2c-i801.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4b5fb2c61..7313efadf 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -434,7 +434,7 @@ static int i801_wait_intr(struct i801_priv *priv)
busy = status & SMBHSTSTS_HOST_BUSY;
status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR;
if (!busy && status)
- return status;
+ return status & STATUS_ERROR_FLAGS;
} while (time_is_after_eq_jiffies(timeout));
return -ETIMEDOUT;
@@ -458,7 +458,6 @@ static int i801_wait_byte_done(struct i801_priv *priv)
static int i801_transaction(struct i801_priv *priv, int xact)
{
- int status;
unsigned long result;
const struct i2c_adapter *adap = &priv->adapter;
@@ -467,13 +466,12 @@ static int i801_transaction(struct i801_priv *priv, int xact)
outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
SMBHSTCNT(priv));
result = wait_for_completion_timeout(&priv->done, adap->timeout);
- return i801_check_post(priv, result ? priv->status : -ETIMEDOUT);
+ return result ? priv->status : -ETIMEDOUT;
}
outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
- status = i801_wait_intr(priv);
- return i801_check_post(priv, status);
+ return i801_wait_intr(priv);
}
static int i801_block_transaction_by_block(struct i801_priv *priv,
@@ -624,7 +622,7 @@ static irqreturn_t i801_isr(int irq, void *dev_id)
status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR;
if (status) {
- priv->status = status;
+ priv->status = status & STATUS_ERROR_FLAGS;
complete(&priv->done);
}
@@ -674,7 +672,7 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
reinit_completion(&priv->done);
outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
result = wait_for_completion_timeout(&priv->done, adap->timeout);
- return i801_check_post(priv, result ? priv->status : -ETIMEDOUT);
+ return result ? priv->status : -ETIMEDOUT;
}
for (i = 1; i <= len; i++) {
@@ -688,7 +686,7 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
status = i801_wait_byte_done(priv);
if (status)
- goto exit;
+ return status;
if (i == 1 && read_write == I2C_SMBUS_READ
&& command != I2C_SMBUS_I2C_BLOCK_DATA) {
@@ -718,9 +716,7 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
}
- status = i801_wait_intr(priv);
-exit:
- return i801_check_post(priv, status);
+ return i801_wait_intr(priv);
}
static void i801_set_hstadd(struct i801_priv *priv, u8 addr, char read_write)
@@ -905,6 +901,8 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
else
ret = i801_simple_transaction(priv, data, addr, command, read_write, size);
+ ret = i801_check_post(priv, ret);
+
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
* time, so we forcibly disable it after every transaction.
*/
--
2.39.0
next prev parent reply other threads:[~2022-12-19 18:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-19 18:12 [PATCH v2 00/10] i2c: i801: Series with minor improvements Heiner Kallweit
2022-12-19 18:13 ` [PATCH v2 01/10] i2c: i801: improve interrupt handler Heiner Kallweit
2023-02-10 8:28 ` Jean Delvare
2023-02-12 21:11 ` Wolfram Sang
2022-12-19 18:14 ` [PATCH v2 02/10] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ Heiner Kallweit
2023-02-10 8:29 ` Jean Delvare
2023-02-12 21:11 ` Wolfram Sang
2022-12-19 18:15 ` [PATCH v2 03/10] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER Heiner Kallweit
2023-02-10 8:30 ` Jean Delvare
2023-02-12 21:11 ` Wolfram Sang
2022-12-19 18:16 ` [PATCH v2 04/10] i2c: i801: add helper i801_set_hstadd() Heiner Kallweit
2023-02-10 8:31 ` Jean Delvare
2023-02-12 21:12 ` Wolfram Sang
2022-12-19 18:17 ` [PATCH v2 05/10] i2c: i801: add i801_simple_transaction(), complementing i801_block_transaction() Heiner Kallweit
2023-02-13 17:04 ` Jean Delvare
2022-12-19 18:20 ` [PATCH v2 06/10] i2c: i801: handle SMBAUXCTL_E32B in i801_block_transaction_by_block only Heiner Kallweit
2023-02-13 16:47 ` Jean Delvare
2022-12-19 18:20 ` [PATCH v2 07/10] i2c: i801: centralize configuring non-block commands in i801_simple_transaction Heiner Kallweit
2023-02-15 15:13 ` Jean Delvare
2022-12-19 18:21 ` [PATCH v2 08/10] i2c: i801: centralize configuring block commands in i801_block_transaction Heiner Kallweit
2023-02-15 15:16 ` Jean Delvare
2022-12-19 18:22 ` [PATCH v2 09/10] i2c: i801: call i801_check_pre() from i801_access() Heiner Kallweit
2022-12-19 18:22 ` Heiner Kallweit [this message]
2023-02-15 17:09 ` [PATCH v2 10/10] i2c: i801: call i801_check_post() " Jean Delvare
2023-02-15 17:16 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0a170b74-c105-7ca3-9811-a370c81462b8@gmail.com \
--to=hkallweit1@gmail.com \
--cc=jdelvare@suse.com \
--cc=linux-i2c@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).