From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bryan Wu Subject: [PATCH 6/7] Blackfin I2C/TWI driver: Just let i2c-bfin-twi driver depends on BLACKFIN Date: Wed, 26 Mar 2008 17:46:48 -0700 Message-ID: <1206578809-16038-7-git-send-email-cooloney@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <> References: <> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org, i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org List-Id: linux-i2c@vger.kernel.org simply use "depends on BLACKFIN" (which is technically correct) and just document which machines have the device Signed-off-by: Bryan Wu --- drivers/i2c/busses/Kconfig | 9 ++++++--- 1 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 5fa9c3c..8891e22 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -100,10 +100,13 @@ config I2C_AU1550 config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" - depends on BF534 || BF536 || BF537 + depends on BLACKFIN help - This is the TWI I2C device driver for Blackfin 534/536/537/54x. - This driver can also be built as a module. If so, the module + This is the TWI I2C device driver for Blackfin BF522, BF525, + BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors, + please don't use this driver. + + This driver can also be built as a module. If so, the module will be called i2c-bfin-twi. config I2C_BLACKFIN_TWI_CLK_KHZ -- 1.5.4.3 _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c