Re: New Style I2C Driver : how to get clients ?

[fuhz-GANU6spQydw@public.gmane.org]

Hello,

Ok, I have just read my code carefully and correct some mistakes.
It is quite clean now, but I still don't get my clients.

In the board initialisation file, I define two things :
- a platform_device for my I2C bus
  The name field correspond to the adapter platform_driver.name
- a valid i2c_board_info struct defining my clients
  The name field correspond to the client i2c_driver.name
  I do not care about type field, I just use the I2C_BOARD_INFO macro

I have written different modules for the algorithm, the adapter, and the client.

First at all, I load the client driver with insmod utility.
Then, I load the algorithm.
And finally, I load the adapter.

When the adapter is loaded, my probe(platform_device) is correctly called.
I allocate a new structure correctly and register a new adapter.

On the remove callback function, I deallocate it.


No client is registred to my i2c_driver, so where is the mistake ?



> got it ??

As soon as possible :-)



Best regards,

Légion.

_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c