From mboxrd@z Thu Jan 1 00:00:00 1970 From: "subscriptions-EwJsF0SrM7dWk0Htik3J/w@public.gmane.org" Subject: SMBus of Sis650/961 P4 system not recognised Date: Sun, 14 Sep 2008 12:29:41 +0100 Message-ID: <1221391781.31885.22.camel@localhost> Reply-To: subscriptions-EwJsF0SrM7dWk0Htik3J/w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org List-Id: linux-i2c@vger.kernel.org Problem: sensors-detect, revision 5249, doesn't detect any sensors. System: A928 ECS Desknote HW: P4, SiS 650/961 motherboard SW: Debian Etch 40R1, Linux 2.6.18-6, lm-sensors 3.0.2 Analysis, yet without solution: Under Windows XP (FanSpeed programme) a Winbond W83L784R and two LM75 are detected and temperatures properly represented. Linux loads the i2c-sis96x busses driver. The chipset presents itself with vendor ID 1039 and devices IDs 0008 and 0650 and 6325 (and 5513, 7012, 0001, 7012 but irrelevant here). FanSpeed (WinXP on dual-boot system) reports: SiS650 SMBus at $0B80 ISA Bus at $0290 SuperIO Winbond W83L517D SiSx30 SMBus at $0B80 Winbond W83L784R (ID=$51) @ $2D LM75 @ $48 LM75 @ $49 How can I make lm-sensors / sensors-detect, and/or Linux 2.6.18-6 to discover this SMBus @ $0B80 with the sensors on it ?? _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c