From mboxrd@z Thu Jan 1 00:00:00 1970 From: "subscriptions-EwJsF0SrM7dWk0Htik3J/w@public.gmane.org" Subject: Re: SMBus of Sis650/961 P4 system not recognised Date: Thu, 25 Sep 2008 11:49:19 +0100 Message-ID: <1222339759.10245.10.camel@localhost> References: <1221391781.31885.22.camel@localhost> <20080920134329.5e1b2198@hyperion.delvare> <1221928948.32367.4.camel@localhost> <20080925103746.1f7bd810@hyperion.delvare> Reply-To: subscriptions-EwJsF0SrM7dWk0Htik3J/w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080925103746.1f7bd810-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Jean Delvare Cc: Linux I2C List-Id: linux-i2c@vger.kernel.org Thanks; had not seen a reference to the separate tools package; now compiled the i2ctools and ran i2cdetect: ------------------------------------------------------------------ Installed I2C busses: i2c-0 smbus SiS96x SMBus adapter at 0x0c00 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-0. I will probe address range 0x03-0x77. Continue? [Y/n] Y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- 08 -- -- -- -- -- -- -- 10: 10 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- 2d -- -- 30: 30 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- 48 49 -- -- -- -- -- -- 50: 50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- 69 6a -- -- -- -- -- 70: -- -- -- -- -- -- -- -- ------------------------------------------------------------------- So the bus is seen; 2d, 48, and 49 correspond to what Fanspeed reported to be a Winbond W83L517D and two LM75, albeit that Fanspeed reported the SMBus to be at $0B80 and i2cdetect reports it to be at $0c00. Will post my question about how to get a driver istalled for the W83L517D and used by lm-sensors in the other mailing list. Thanks for your help Jean ! On Thu, 2008-09-25 at 10:37 +0200, Jean Delvare wrote: > Hi Martin, > > Please keep the i2c list Cc'd. > > On Sat, 20 Sep 2008 17:42:27 +0100, subscriptions-EwJsF0SrM7dWk0Htik3J/w@public.gmane.org wrote: > > your response is most appreciated. ! However after loading the 12c-dev > > module successfully I cannot run i2cdetect as it seems not to be a part > > of the latest lm-sensors (3.0.2) for 2.6 kernels. > > > > What should I do to cure the absence of this detection utility ? > > i2cdetect is part of the i2c-tools package: > http://www.lm-sensors.org/wiki/I2CTools > _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c