From: Rodolfo Giometti <giometti-k2GhghHVRtY@public.gmane.org>
To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>,
David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>,
Kumar Gala
<galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>,
Peter Korsgaard <jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org>,
Rodolfo Giometti <giometti-k2GhghHVRtY@public.gmane.org>
Subject: [PATCH 3/6] i2c: ignore active clients detaching during adapter removal.
Date: Thu, 5 Feb 2009 14:36:10 +0100 [thread overview]
Message-ID: <1233840973-13268-4-git-send-email-giometti@linux.it> (raw)
In-Reply-To: <1233840973-13268-3-git-send-email-giometti-k2GhghHVRtY@public.gmane.org>
When we are removing an adapter we decide to ignore any active client
detaching faults for two reasons:
1) one (or more) active client may be switched off, so it cannot
replay to the "adapter removed" event.
2) it shouldn't happen, and even if it happens it may be due a bus
fault which can be resolved by resetting the adapter (most of them
can be resetted simply by rmmod and then insmod the module again).
Signed-off-by: Rodolfo Giometti <giometti-k2GhghHVRtY@public.gmane.org>
---
drivers/i2c/i2c-core.c | 17 +++++++----------
1 files changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 74b89a9..5d3646f 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -593,11 +593,13 @@ static int i2c_do_del_adapter(struct device_driver *d, void *data)
if (!driver->detach_adapter)
return 0;
+
+ /* We ignore the return code; if it fails, too bad */
res = driver->detach_adapter(adapter);
if (res)
dev_err(&adapter->dev, "detach_adapter failed (%d) "
"for driver [%s]\n", res, driver->driver.name);
- return res;
+ return 0;
}
/**
@@ -611,7 +613,7 @@ static int i2c_do_del_adapter(struct device_driver *d, void *data)
int i2c_del_adapter(struct i2c_adapter *adap)
{
struct i2c_client *client, *_n;
- int res = 0;
+ int res = 0, dummy;
mutex_lock(&core_lock);
@@ -624,13 +626,10 @@ int i2c_del_adapter(struct i2c_adapter *adap)
}
/* Tell drivers about this removal */
- res = bus_for_each_drv(&i2c_bus_type, NULL, adap,
+ dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap,
i2c_do_del_adapter);
- if (res)
- goto out_unlock;
- /* detach any active clients. This must be done first, because
- * it can fail; in which case we give up. */
+ /* Detach any active clients */
list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) {
struct i2c_driver *driver;
@@ -643,12 +642,10 @@ int i2c_del_adapter(struct i2c_adapter *adap)
}
/* legacy drivers create and remove clients themselves */
- if ((res = driver->detach_client(client))) {
+ if (driver->detach_client(client))
dev_err(&adap->dev, "detach_client failed for client "
"[%s] at address 0x%02x\n", client->name,
client->addr);
- goto out_unlock;
- }
}
/* clean up the sysfs representation */
--
1.5.6.3
next prev parent reply other threads:[~2009-02-05 13:36 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-05 13:36 i2c bus multiplexing (Version 2) Rodolfo Giometti
[not found] ` <1233840973-13268-1-git-send-email-giometti-k2GhghHVRtY@public.gmane.org>
2009-02-05 13:36 ` [PATCH 1/6] i2c: put driver_unregister() out of core_lock protection Rodolfo Giometti
[not found] ` <1233840973-13268-2-git-send-email-giometti-k2GhghHVRtY@public.gmane.org>
2009-02-05 13:36 ` [PATCH 2/6] i2c: use rwsem instead of mutex Rodolfo Giometti
[not found] ` <1233840973-13268-3-git-send-email-giometti-k2GhghHVRtY@public.gmane.org>
2009-02-05 13:36 ` Rodolfo Giometti [this message]
[not found] ` <1233840973-13268-4-git-send-email-giometti-k2GhghHVRtY@public.gmane.org>
2009-02-05 13:36 ` [PATCH 4/6] i2c: free adapters (de)registration from i2c "core_lock" mutex Rodolfo Giometti
[not found] ` <1233840973-13268-5-git-send-email-giometti-k2GhghHVRtY@public.gmane.org>
2009-02-05 13:36 ` [PATCH 5/6] i2c: Multiplexed I2C bus core support Rodolfo Giometti
[not found] ` <1233840973-13268-6-git-send-email-giometti-k2GhghHVRtY@public.gmane.org>
2009-02-05 13:36 ` [PATCH 6/6] i2c: driver for PCA954x I2C multiplexer series Rodolfo Giometti
2009-02-06 0:02 ` [PATCH 3/6] i2c: ignore active clients detaching during adapter removal David Brownell
[not found] ` <200902051602.44036.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2009-02-06 10:22 ` Rodolfo Giometti
[not found] ` <20090206102220.GF28554-AVVDYK/kqiJWk0Htik3J/w@public.gmane.org>
2009-02-06 12:15 ` Jean Delvare
[not found] ` <20090206131520.232b53c3-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-02-06 12:59 ` Rodolfo Giometti
[not found] ` <20090206125907.GA8581-AVVDYK/kqiJWk0Htik3J/w@public.gmane.org>
2009-02-06 21:15 ` Jean Delvare
[not found] ` <20090206221519.5fc3d2b9-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-02-09 13:06 ` Rodolfo Giometti
[not found] ` <20090209130642.GV7975-AVVDYK/kqiJWk0Htik3J/w@public.gmane.org>
2009-02-10 11:08 ` Jean Delvare
[not found] ` <20090210120839.23592e38-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-02-18 16:48 ` Rodolfo Giometti
[not found] ` <20090218164812.GA11217-AVVDYK/kqiJWk0Htik3J/w@public.gmane.org>
2009-05-28 7:50 ` Jean Delvare
[not found] ` <20090528095054.03fc2df3-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-05-28 7:58 ` Rodolfo Giometti
[not found] ` <20090528075835.GH20243-AVVDYK/kqiJWk0Htik3J/w@public.gmane.org>
2009-05-28 8:22 ` Jean Delvare
2009-05-29 7:28 ` Rodolfo Giometti
[not found] ` <20090529072835.GA4575-AVVDYK/kqiJWk0Htik3J/w@public.gmane.org>
2009-05-29 7:46 ` Jean Delvare
2009-05-28 11:50 ` [PATCH 2/6] i2c: use rwsem instead of mutex Jean Delvare
2009-12-11 22:41 ` i2c bus multiplexing (Version 2) Muralidharan Karicheri
[not found] ` <loom.20091211T234046-786-eS7Uydv5nfjZ+VzJOa5vwg@public.gmane.org>
2010-04-16 11:18 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1233840973-13268-4-git-send-email-giometti@linux.it \
--to=giometti-k2ghghhvrty@public.gmane.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
--cc=galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
--cc=jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).