From: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
lethal-M7jkjyW5wf5g9hUCZPvPmw@public.gmane.org,
Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH 1/3] i2c/algo-pca: rework waiting for a free bus
Date: Tue, 24 Feb 2009 17:22:14 +0100 [thread overview]
Message-ID: <1235492536-31695-2-git-send-email-w.sang@pengutronix.de> (raw)
In-Reply-To: <1235492536-31695-1-git-send-email-w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Waiting for a free bus now accepts the timeout value in jiffies and does
proper checking using time_before.
Signed-off-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
drivers/i2c/algos/i2c-algo-pca.c | 18 ++++++++++--------
drivers/i2c/busses/i2c-pca-isa.c | 2 +-
include/linux/i2c-pca-platform.h | 2 +-
3 files changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index a8e51bd..59ee88a 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
@@ -186,14 +187,15 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
int numbytes = 0;
int state;
int ret;
- int timeout = i2c_adap->timeout;
+ unsigned long timeout = jiffies + i2c_adap->timeout;
- while ((state = pca_status(adap)) != 0xf8 && timeout--) {
- msleep(10);
- }
- if (state != 0xf8) {
- dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state);
- return -EAGAIN;
+ while (pca_status(adap) != 0xf8) {
+ if (time_before(jiffies, timeout)) {
+ msleep(10);
+ } else {
+ dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state);
+ return -EAGAIN;
+ }
}
DEB1("{{{ XFER %d messages\n", num);
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 8835de2..84d035c 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -103,7 +103,7 @@ static struct i2c_adapter pca_isa_ops = {
.owner = THIS_MODULE,
.algo_data = &pca_isa_data,
.name = "PCA9564/PCA9665 ISA Adapter",
- .timeout = 100,
+ .timeout = HZ,
};
static int __devinit pca_isa_match(struct device *dev, unsigned int id)
diff --git a/include/linux/i2c-pca-platform.h b/include/linux/i2c-pca-platform.h
index 3d19187..aba3375 100644
--- a/include/linux/i2c-pca-platform.h
+++ b/include/linux/i2c-pca-platform.h
@@ -6,7 +6,7 @@ struct i2c_pca9564_pf_platform_data {
* not supplied (negative value), but it
* cannot exit some error conditions then */
int i2c_clock_speed; /* values are defined in linux/i2c-algo-pca.h */
- int timeout; /* timeout = this value * 10us */
+ int timeout; /* timeout in jiffies */
};
#endif /* I2C_PCA9564_PLATFORM_H */
--
1.5.6.5
next prev parent reply other threads:[~2009-02-24 16:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-24 16:22 i2c/pca: handle timeout Wolfram Sang
[not found] ` <1235492536-31695-1-git-send-email-w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2009-02-24 16:22 ` Wolfram Sang [this message]
[not found] ` <1235492536-31695-2-git-send-email-w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2009-02-26 17:14 ` [PATCH 1/3] i2c/algo-pca: rework waiting for a free bus Jean Delvare
[not found] ` <20090226181447.35775a21-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-02-27 8:44 ` [PATCH V2 " Wolfram Sang
[not found] ` <20090227084412.GA3481-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2009-02-27 10:59 ` Jean Delvare
2009-02-24 16:22 ` [PATCH 2/3] i2c/algo-pca: use timeout for checking the state machine Wolfram Sang
[not found] ` <1235492536-31695-3-git-send-email-w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2009-02-26 21:25 ` Jean Delvare
2009-02-24 16:22 ` [PATCH 3/3] i2c/pca-platform: use defaults if no platform_data given Wolfram Sang
[not found] ` <1235492536-31695-4-git-send-email-w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2009-02-26 21:30 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1235492536-31695-2-git-send-email-w.sang@pengutronix.de \
--to=w.sang-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=lethal-M7jkjyW5wf5g9hUCZPvPmw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox