* [2.6.31] ir-kbd-i2c oops.
@ 2009-09-16 1:00 Paweł Sikora
[not found] ` <200909160300.28382.pluto-PIIpFW8S9c0@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Paweł Sikora @ 2009-09-16 1:00 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA; +Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA
hi,
the latest 2.6.31 kernel oopses in ir-kbd-i2c on my box:
afaics the 2.6.28.10 is also affected.
http://imgbin.org/index.php?page=image&id=776
http://imgbin.org/index.php?page=image&id=777
http://imgbin.org/index.php?page=image&id=778
installed pinnacle tv card with infra-red receiver:
05:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
Video Broadcast Decoder (rev d1)
Subsystem: Pinnacle Systems Inc. PCTV 110i (saa7133)
Kernel driver in use: saa7134
Kernel modules: saa7134
if you need i'll provide more information.
please, CC me on reply.
BR, Paweł.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.31] ir-kbd-i2c oops.
[not found] ` <200909160300.28382.pluto-PIIpFW8S9c0@public.gmane.org>
@ 2009-09-16 6:57 ` Jean Delvare
[not found] ` <20090916085701.6e883600-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Jean Delvare @ 2009-09-16 6:57 UTC (permalink / raw)
To: Paweł Sikora
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, LMML
Hi Pawel,
On Wed, 16 Sep 2009 03:00:28 +0200, Paweł Sikora wrote:
> the latest 2.6.31 kernel oopses in ir-kbd-i2c on my box:
> afaics the 2.6.28.10 is also affected.
>
> http://imgbin.org/index.php?page=image&id=776
> http://imgbin.org/index.php?page=image&id=777
> http://imgbin.org/index.php?page=image&id=778
>
> installed pinnacle tv card with infra-red receiver:
>
> 05:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
> Video Broadcast Decoder (rev d1)
> Subsystem: Pinnacle Systems Inc. PCTV 110i (saa7133)
> Kernel driver in use: saa7134
> Kernel modules: saa7134
>
> if you need i'll provide more information.
> please, CC me on reply.
This would have best been posted to linux-media... Cc'd.
I think this would be fixed by the following patch:
http://patchwork.kernel.org/patch/45707/
Can you please give it a try?
If I am correct then only kernel 2.6.31 would be affected, 2.6.30
wouldn't be.
--
Jean Delvare
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.31] ir-kbd-i2c oops.
[not found] ` <20090916085701.6e883600-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
@ 2009-09-16 8:03 ` Paweł Sikora
[not found] ` <200909161003.33090.pluto-PIIpFW8S9c0@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Paweł Sikora @ 2009-09-16 8:03 UTC (permalink / raw)
To: Jean Delvare
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, LMML
[-- Attachment #1: Type: Text/Plain, Size: 223 bytes --]
On Wednesday 16 September 2009 08:57:01 Jean Delvare wrote:
> Hi Pawel,
>
> I think this would be fixed by the following patch:
> http://patchwork.kernel.org/patch/45707/
still oopses. this time i've attached full dmesg.
[-- Attachment #2: log.txt --]
[-- Type: text/plain, Size: 57494 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-0.4 (pluto@pldmachine) (gcc version 4.4.1 20090724 (release) (PLD-Linux) ) #1 SMP Wed Sep 16 09:45:40 CEST 2009
[ 0.000000] Command line: root=/dev/md0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
[ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009cc00 (usable)
[ 0.000000] modified: 000000000009cc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] modified: 00000000cff70000 - 00000000cff7e000 (ACPI data)
[ 0.000000] modified: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] modified: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff70000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff70000 page 4k
[ 0.000000] kernel direct mapping tables up to cff70000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ 11000-1b000
[ 0.000000] RAMDISK: 37f50000 - 37fefb03
[ 0.000000] ACPI: RSDP 00000000000fb460 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff70100 0005C (v01 A_M_I_ OEMXSDT 08000820 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff70290 000F4 (v03 A_M_I_ OEMFACP 08000820 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff70440 0964B (v01 A1012 A1012001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff7e000 00040
[ 0.000000] ACPI: APIC 00000000cff70390 0006C (v01 A_M_I_ OEMAPIC 08000820 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff70400 0003C (v01 A_M_I_ OEMMCFG 08000820 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff7e040 00081 (v01 A_M_I_ AMI_OEM 08000820 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff79a90 00038 (v01 A_M_I_ OEMHPET 08000820 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff79ad0 000B0 (v01 A_M_I_ OEMOSFR 08000820 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff7e8d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000016000 - 000000000001afff]
[ 0.000000] bootmap [000000000001b000 - 0000000000060fff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001780a40] TEXT DATA BSS ==> [0001000000 - 0001780a40]
[ 0.000000] #3 [0037f50000 - 0037fefb03] RAMDISK ==> [0037f50000 - 0037fefb03]
[ 0.000000] #4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
[ 0.000000] #5 [0001781000 - 0001781278] BRK ==> [0001781000 - 0001781278]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000016000] PGTABLE ==> [0000011000 - 0000016000]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000cff70
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096892
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3816 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833448 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
[ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages at ffff880028032000, static data 72416 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065424
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8195868k/9175040k available (3915k kernel code, 787472k absent, 191700k reserved, 2352k data, 504k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2499.742 MHz processor.
[ 0.000604] Console: colour VGA+ 80x25
[ 0.000606] console [tty0] enabled
[ 0.003333] allocated 83886080 bytes of page_cgroup
[ 0.003333] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5001.79 BogoMIPS (lpj=8332473)
[ 0.003333] Security Framework initialized
[ 0.003333] SELinux: Disabled at boot.
[ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003936] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005422] Mount-cache hash table entries: 256
[ 0.005589] Initializing cgroup subsys ns
[ 0.005623] Initializing cgroup subsys cpuacct
[ 0.005654] Initializing cgroup subsys memory
[ 0.005689] Initializing cgroup subsys devices
[ 0.005718] Initializing cgroup subsys freezer
[ 0.005748] Initializing cgroup subsys net_cls
[ 0.005789] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005841] CPU: L2 cache: 3072K
[ 0.005871] CPU 0/0x0 -> Node 0
[ 0.005900] CPU: Physical Processor ID: 0
[ 0.005929] CPU: Processor Core ID: 0
[ 0.005959] mce: CPU supports 6 MCE banks
[ 0.005993] CPU0: Thermal monitoring enabled (TM2)
[ 0.006025] using mwait in idle threads.
[ 0.006054] Performance Counters: Core2 events, Intel PMU driver.
[ 0.006133] ... version: 2
[ 0.006162] ... bit width: 40
[ 0.006191] ... generic counters: 2
[ 0.006219] ... value mask: 000000ffffffffff
[ 0.006248] ... max period: 000000007fffffff
[ 0.006278] ... fixed-purpose counters: 3
[ 0.006306] ... counter mask: 0000000700000003
[ 0.006352] ACPI: Core revision 20090521
[ 0.020054] Setting APIC routing to flat
[ 0.020381] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053489] CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.056666] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 5001.74 BogoMIPS (lpj=8332387)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 3072K
[ 0.003333] CPU 1/0x1 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] CPU1: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.147999] CPU1: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.148362] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.150088] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 5001.75 BogoMIPS (lpj=8332403)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 3072K
[ 0.003333] CPU 2/0x2 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] CPU2: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.244619] CPU2: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.245313] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.246726] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 5001.75 BogoMIPS (lpj=8332402)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 3072K
[ 0.003333] CPU 3/0x3 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] CPU3: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.341338] CPU3: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
[ 0.341698] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.343342] Brought up 4 CPUs
[ 0.343380] Total of 4 processors activated (20005.04 BogoMIPS).
[ 0.343536] regulator: core version 0.5
[ 0.343536] NET: Registered protocol family 16
[ 0.343536] ACPI: bus type pci registered
[ 0.346701] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.346732] PCI: Not using MMCONFIG.
[ 0.346760] PCI: Using configuration type 1 for base access
[ 0.347351] bio: create slab <bio-0> at 0
[ 0.350099] ACPI: EC: Look up EC in DSDT
[ 0.361906] ACPI: Interpreter enabled
[ 0.361942] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.362115] ACPI: Using IOAPIC for interrupt routing
[ 0.362188] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.364494] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.370452] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.376835] ACPI: No dock devices found.
[ 0.376973] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.377033] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.377033] pci 0000:00:01.0: PME# disabled
[ 0.377033] pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
[ 0.377033] pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f]
[ 0.377033] pci 0000:00:1a.2: reg 20 io port: [0xac00-0xac1f]
[ 0.377033] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe7ffc00-0xfe7fffff]
[ 0.377063] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.377095] pci 0000:00:1a.7: PME# disabled
[ 0.377154] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe7f8000-0xfe7fbfff]
[ 0.377187] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.377218] pci 0000:00:1b.0: PME# disabled
[ 0.377293] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.377324] pci 0000:00:1c.0: PME# disabled
[ 0.377400] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.377431] pci 0000:00:1c.4: PME# disabled
[ 0.377505] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.377536] pci 0000:00:1c.5: PME# disabled
[ 0.377606] pci 0000:00:1d.0: reg 20 io port: [0xa080-0xa09f]
[ 0.377661] pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
[ 0.377716] pci 0000:00:1d.2: reg 20 io port: [0xa480-0xa49f]
[ 0.377774] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe7ff800-0xfe7ffbff]
[ 0.377818] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.377850] pci 0000:00:1d.7: PME# disabled
[ 0.377975] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.378010] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.378041] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.380003] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 0.380086] pci 0000:00:1f.2: reg 10 io port: [0x9c00-0x9c07]
[ 0.380090] pci 0000:00:1f.2: reg 14 io port: [0x9880-0x9883]
[ 0.380094] pci 0000:00:1f.2: reg 18 io port: [0x9800-0x9807]
[ 0.380099] pci 0000:00:1f.2: reg 1c io port: [0x9480-0x9483]
[ 0.380103] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x941f]
[ 0.380107] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe7fe800-0xfe7fefff]
[ 0.380132] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.380163] pci 0000:00:1f.2: PME# disabled
[ 0.380212] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe7ff400-0xfe7ff4ff]
[ 0.380223] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.380257] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.380261] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
[ 0.380265] pci 0000:01:00.0: reg 18 32bit mmio: [0xfe8e0000-0xfe8effff]
[ 0.380277] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8c0000-0xfe8dffff]
[ 0.380291] pci 0000:01:00.0: supports D1 D2
[ 0.380313] pci 0000:01:00.1: reg 10 32bit mmio: [0xfe8f0000-0xfe8fffff]
[ 0.380341] pci 0000:01:00.1: supports D1 D2
[ 0.380376] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.380378] pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.380381] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.380416] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.380454] pci 0000:03:00.0: reg 10 io port: [0xdc00-0xdc07]
[ 0.380461] pci 0000:03:00.0: reg 14 io port: [0xd880-0xd883]
[ 0.380467] pci 0000:03:00.0: reg 18 io port: [0xd800-0xd807]
[ 0.380474] pci 0000:03:00.0: reg 1c io port: [0xd480-0xd483]
[ 0.380481] pci 0000:03:00.0: reg 20 io port: [0xd400-0xd40f]
[ 0.380487] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeaffc00-0xfeafffff]
[ 0.380522] pci 0000:03:00.0: supports D1
[ 0.380523] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.380556] pci 0000:03:00.0: PME# disabled
[ 0.380622] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.380625] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.380673] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9c0000-0xfe9fffff]
[ 0.380680] pci 0000:02:00.0: reg 18 io port: [0xcc00-0xcc7f]
[ 0.380731] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.380763] pci 0000:02:00.0: PME# disabled
[ 0.380832] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
[ 0.380835] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.380865] pci 0000:05:00.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.380903] pci 0000:05:00.0: supports D1 D2
[ 0.380933] pci 0000:05:01.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.380939] pci 0000:05:01.0: reg 14 32bit mmio: [0xfebff400-0xfebff4ff]
[ 0.380961] pci 0000:05:01.0: reg 30 32bit mmio: [0xfebe0000-0xfebeffff]
[ 0.380977] pci 0000:05:01.0: PME# supported from D0
[ 0.381009] pci 0000:05:01.0: PME# disabled
[ 0.381074] pci 0000:00:1e.0: transparent bridge
[ 0.381105] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.381108] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.381128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.381243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.381290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.381380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.381424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.381488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.394031] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.394031] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.394212] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.396807] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.397206] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.397656] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.398055] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.398464] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.398829] PCI: Using ACPI for IRQ routing
[ 0.410005] NetLabel: Initializing
[ 0.410035] NetLabel: domain hash size = 128
[ 0.410066] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.410115] NetLabel: unlabeled traffic allowed by default
[ 0.410176] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.410323] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.430006] pnp: PnP ACPI init
[ 0.430046] ACPI: bus type pnp registered
[ 0.433099] pnp: PnP ACPI: found 14 devices
[ 0.433129] ACPI: ACPI bus type pnp unregistered
[ 0.433164] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.433198] system 00:06: ioport range 0x290-0x29f has been reserved
[ 0.433231] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.433261] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.433292] system 00:07: ioport range 0x500-0x57f could not be reserved
[ 0.433323] system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.433358] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.433389] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.433419] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.433453] system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.433486] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.433520] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.433552] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.433585] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.433616] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.433646] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.433677] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.438890] pci 0000:05:01.0: BAR 6: address space collision on of device [0xfebe0000-0xfebeffff]
[ 0.438951] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.438982] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.439012] pci 0000:00:01.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.439043] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.439079] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.439108] pci 0000:00:1c.0: IO window: disabled
[ 0.439139] pci 0000:00:1c.0: MEM window: disabled
[ 0.439170] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.439207] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.439237] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.439269] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.439300] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.439331] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.439361] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
[ 0.439393] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.439424] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.439456] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.439486] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.439518] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.439549] pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf00fffff
[ 0.439584] alloc irq_desc for 16 on node 0
[ 0.439586] alloc kstat_irqs on node 0
[ 0.439590] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.439621] pci 0000:00:01.0: setting latency timer to 64
[ 0.439626] alloc irq_desc for 17 on node 0
[ 0.439627] alloc kstat_irqs on node 0
[ 0.439630] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.439661] pci 0000:00:1c.0: setting latency timer to 64
[ 0.439666] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.439698] pci 0000:00:1c.4: setting latency timer to 64
[ 0.439703] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.439734] pci 0000:00:1c.5: setting latency timer to 64
[ 0.439739] pci 0000:00:1e.0: setting latency timer to 64
[ 0.439742] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.439743] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.439745] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.439747] pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.439749] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.439750] pci_bus 0000:04: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.439752] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.439754] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.439756] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.439757] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.439759] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.439761] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.439762] pci_bus 0000:05: resource 2 pref mem [0xf0000000-0xf00fffff]
[ 0.439764] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.439766] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.439776] NET: Registered protocol family 2
[ 0.439959] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.440937] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.443886] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.444282] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.444313] TCP reno registered
[ 0.444419] NET: Registered protocol family 1
[ 0.444510] Trying to unpack rootfs image as initramfs...
[ 0.445177] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.445809] Freeing initrd memory: 638k freed
[ 0.447425] Scanning for low memory corruption every 60 seconds
[ 0.447760] audit: initializing netlink socket (disabled)
[ 0.447797] type=2000 audit(1253091292.446:1): initialized
[ 0.453371] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.459912] VFS: Disk quotas dquot_6.5.2
[ 0.460009] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.460142] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.460238] msgmni has been set to 16008
[ 0.460523] alg: No test for stdrng (krng)
[ 0.460667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.460702] io scheduler noop registered
[ 0.460731] io scheduler anticipatory registered
[ 0.460760] io scheduler deadline registered
[ 0.460914] io scheduler cfq registered (default)
[ 0.461090] pci 0000:01:00.0: Boot video device
[ 0.461233] alloc irq_desc for 24 on node 0
[ 0.461235] alloc kstat_irqs on node 0
[ 0.461241] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.461245] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.461418] alloc irq_desc for 25 on node 0
[ 0.461419] alloc kstat_irqs on node 0
[ 0.461424] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.461430] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.461661] alloc irq_desc for 26 on node 0
[ 0.461663] alloc kstat_irqs on node 0
[ 0.461668] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.461674] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.461925] alloc irq_desc for 27 on node 0
[ 0.461927] alloc kstat_irqs on node 0
[ 0.461932] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.461938] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.501865] Linux agpgart interface v0.103
[ 0.501929] Switched to high resolution mode on CPU 1
[ 0.501984] Switched to high resolution mode on CPU 3
[ 0.502124] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.502256] Switched to high resolution mode on CPU 2
[ 0.503495] Switched to high resolution mode on CPU 0
[ 0.505531] brd: module loaded
[ 0.505712] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.505889] Fixed MDIO Bus: probed
[ 0.506190] PNP: No PS/2 controller found. Probing ports directly.
[ 0.508905] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.508944] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.509164] mice: PS/2 mouse device common for all mice
[ 0.509247] rtc_cmos 00:03: RTC can wake from S4
[ 0.509335] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.509384] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.509446] cpuidle: using governor ladder
[ 0.509475] cpuidle: using governor menu
[ 0.509633] TCP cubic registered
[ 0.509897] NET: Registered protocol family 10
[ 0.510268] lo: Disabled Privacy Extensions
[ 0.510658] Mobile IPv6
[ 0.510687] NET: Registered protocol family 17
[ 0.510981] TuxOnIce: Ignoring late initcall, as requested.
[ 0.511025] registered taskstats version 1
[ 0.511118] No TPM chip found, activating TPM-bypass!
[ 0.511333] rtc_cmos 00:03: setting system clock to 2009-09-16 08:54:52 UTC (1253091292)
[ 0.511400] Initalizing network drop monitor service
[ 0.551748] RAMDISK: gzip image found at block 0
[ 0.564758] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[ 0.576350] SCSI subsystem initialized
[ 0.587464] libata version 3.00 loaded.
[ 0.590247] ahci 0000:00:1f.2: version 3.0
[ 0.590259] alloc irq_desc for 19 on node 0
[ 0.590261] alloc kstat_irqs on node 0
[ 0.590266] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.590344] alloc irq_desc for 28 on node 0
[ 0.590345] alloc kstat_irqs on node 0
[ 0.590351] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.590383] ahci: SSS flag set, parallel bus scan disabled
[ 0.590439] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.590473] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
[ 0.590509] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.623376] scsi0 : ahci
[ 0.623766] scsi1 : ahci
[ 0.623985] scsi2 : ahci
[ 0.624201] scsi3 : ahci
[ 0.624420] scsi4 : ahci
[ 0.624613] scsi5 : ahci
[ 0.624862] ata1: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe900 irq 28
[ 0.624896] ata2: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe980 irq 28
[ 0.624931] ata3: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea00 irq 28
[ 0.624965] ata4: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea80 irq 28
[ 0.624998] ata5: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7feb00 irq 28
[ 0.625032] ata6: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7feb80 irq 28
[ 1.103352] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.103849] ata1.00: ATA-7: WDC WD1600YD-01NVB1, 10.02E01, max UDMA/133
[ 1.103883] ata1.00: 321672960 sectors, multi 0: LBA48 NCQ (depth 1)
[ 1.104481] ata1.00: configured for UDMA/133
[ 1.116765] scsi 0:0:0:0: Direct-Access ATA WDC WD1600YD-01N 10.0 PQ: 0 ANSI: 5
[ 1.996684] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.997172] ata2.00: ATA-7: WDC WD1600YD-01NVB1, 10.02E01, max UDMA/133
[ 1.997205] ata2.00: 321672960 sectors, multi 0: LBA48 NCQ (depth 1)
[ 1.997783] ata2.00: configured for UDMA/133
[ 2.010066] scsi 1:0:0:0: Direct-Access ATA WDC WD1600YD-01N 10.0 PQ: 0 ANSI: 5
[ 2.330011] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.663344] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.996677] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.330011] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.346342] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3.362439] md: raid1 personality registered for level 1
[ 3.365712] sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[ 3.365777] sd 0:0:0:0: [sda] Write Protect is off
[ 3.365807] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.365824] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.365956] sda:
[ 3.366104] sd 1:0:0:0: [sdb] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[ 3.366191] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.366222] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.366238] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.366348] sdb: sda1 sda2 sda3
[ 3.386740] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.389359] sdb1 sdb2 sdb3
[ 3.390291] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.391731] md: md0 stopped.
[ 3.524993] md: bind<sda2>
[ 3.525140] md: bind<sdb2>
[ 3.525300] raid1: raid set md0 active with 2 out of 2 mirrors
[ 3.525357] md0: detected capacity change from 0 to 12000559104
[ 3.526908] md0: unknown partition table
[ 3.586166] VFS: Mounted root (jfs filesystem) readonly on device 9:0.
[ 3.586199] Trying to move old root to /initrd ... okay
[ 3.612355] Freeing unused kernel memory: 504k freed
[ 6.352658] iTCO_vendor_support: vendor-support=0
[ 6.353702] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 6.353786] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 6.353863] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.354784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 6.354790] ACPI: Power Button [PWRF]
[ 6.354847] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.354851] ACPI: Power Button [PWRB]
[ 6.389144] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.389156] ATL1E 0000:02:00.0: setting latency timer to 64
[ 6.392113] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.394763] ACPI: SSDT 00000000cff7e0d0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 6.395208] processor LNXCPU:00: registered as cooling_device0
[ 6.395597] ACPI: SSDT 00000000cff7e2d0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 6.396645] processor LNXCPU:01: registered as cooling_device1
[ 6.397008] ACPI: SSDT 00000000cff7e4d0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 6.397434] processor LNXCPU:02: registered as cooling_device2
[ 6.397771] ACPI: SSDT 00000000cff7e6d0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 6.398190] processor LNXCPU:03: registered as cooling_device3
[ 6.405950] usbcore: registered new interface driver usbfs
[ 6.406052] usbcore: registered new interface driver hub
[ 6.406085] usbcore: registered new device driver usb
[ 6.432386] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.432459] alloc irq_desc for 18 on node 0
[ 6.432461] alloc kstat_irqs on node 0
[ 6.432466] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.432503] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 6.432506] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 6.432537] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 6.436445] ehci_hcd 0000:00:1a.7: debug port 1
[ 6.436450] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 6.436508] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 6.439704] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.439738] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.450008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 6.450034] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.450036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.450038] usb usb1: Product: EHCI Host Controller
[ 6.450040] usb usb1: Manufacturer: Linux 2.6.31-0.4 ehci_hcd
[ 6.450042] usb usb1: SerialNumber: 0000:00:1a.7
[ 6.450166] usb usb1: configuration #1 chosen from 1 choice
[ 6.450208] hub 1-0:1.0: USB hub found
[ 6.450215] hub 1-0:1.0: 6 ports detected
[ 6.450363] alloc irq_desc for 23 on node 0
[ 6.450365] alloc kstat_irqs on node 0
[ 6.450370] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.450409] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6.450412] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.450420] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 6.454333] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.454337] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 6.454351] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 6.470010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.470028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.470031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.470033] usb usb2: Product: EHCI Host Controller
[ 6.470035] usb usb2: Manufacturer: Linux 2.6.31-0.4 ehci_hcd
[ 6.470037] usb usb2: SerialNumber: 0000:00:1d.7
[ 6.470340] usb usb2: configuration #1 chosen from 1 choice
[ 6.470390] hub 2-0:1.0: USB hub found
[ 6.470396] hub 2-0:1.0: 6 ports detected
[ 6.497136] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 6.497217] via-rhine 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.501474] eth1: VIA Rhine II at 0xfebff400, 00:05:5d:e1:f9:45, IRQ 17.
[ 6.502181] eth1: MII PHY found at address 8, status 0x7809 advertising 01e1 Link 0000.
[ 6.547365] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.547523] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.547533] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.547537] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 6.547551] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 6.547587] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 6.547624] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.547626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.547627] usb usb3: Product: UHCI Host Controller
[ 6.547629] usb usb3: Manufacturer: Linux 2.6.31-0.4 uhci_hcd
[ 6.547630] usb usb3: SerialNumber: 0000:00:1a.0
[ 6.547725] usb usb3: configuration #1 chosen from 1 choice
[ 6.547750] hub 3-0:1.0: USB hub found
[ 6.547755] hub 3-0:1.0: 2 ports detected
[ 6.548119] alloc irq_desc for 21 on node 0
[ 6.548121] alloc kstat_irqs on node 0
[ 6.548125] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 6.548130] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 6.548132] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 6.548142] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 6.548167] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 6.548192] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.548193] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.548195] usb usb4: Product: UHCI Host Controller
[ 6.548196] usb usb4: Manufacturer: Linux 2.6.31-0.4 uhci_hcd
[ 6.548198] usb usb4: SerialNumber: 0000:00:1a.1
[ 6.548252] usb usb4: configuration #1 chosen from 1 choice
[ 6.548275] hub 4-0:1.0: USB hub found
[ 6.548280] hub 4-0:1.0: 2 ports detected
[ 6.548368] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.548373] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 6.548375] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 6.548383] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 6.548402] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 6.548428] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.548429] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.548431] usb usb5: Product: UHCI Host Controller
[ 6.548432] usb usb5: Manufacturer: Linux 2.6.31-0.4 uhci_hcd
[ 6.548434] usb usb5: SerialNumber: 0000:00:1a.2
[ 6.548482] usb usb5: configuration #1 chosen from 1 choice
[ 6.548504] hub 5-0:1.0: USB hub found
[ 6.548509] hub 5-0:1.0: 2 ports detected
[ 6.548596] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.548600] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.548602] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.548610] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 6.548629] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 6.548655] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.548657] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.548658] usb usb6: Product: UHCI Host Controller
[ 6.548660] usb usb6: Manufacturer: Linux 2.6.31-0.4 uhci_hcd
[ 6.548661] usb usb6: SerialNumber: 0000:00:1d.0
[ 6.548706] usb usb6: configuration #1 chosen from 1 choice
[ 6.548728] hub 6-0:1.0: USB hub found
[ 6.548732] hub 6-0:1.0: 2 ports detected
[ 6.548816] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.548820] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6.548823] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.548832] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 6.548856] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 6.548881] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.548882] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.548884] usb usb7: Product: UHCI Host Controller
[ 6.548885] usb usb7: Manufacturer: Linux 2.6.31-0.4 uhci_hcd
[ 6.548887] usb usb7: SerialNumber: 0000:00:1d.1
[ 6.548931] usb usb7: configuration #1 chosen from 1 choice
[ 6.548953] hub 7-0:1.0: USB hub found
[ 6.548957] hub 7-0:1.0: 2 ports detected
[ 6.549042] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.549046] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6.549048] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.549056] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 6.549075] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 6.549100] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.549101] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.549103] usb usb8: Product: UHCI Host Controller
[ 6.549104] usb usb8: Manufacturer: Linux 2.6.31-0.4 uhci_hcd
[ 6.549106] usb usb8: SerialNumber: 0000:00:1d.2
[ 6.549148] usb usb8: configuration #1 chosen from 1 choice
[ 6.549175] hub 8-0:1.0: USB hub found
[ 6.549184] hub 8-0:1.0: 2 ports detected
[ 6.556790] alloc irq_desc for 22 on node 0
[ 6.556792] alloc kstat_irqs on node 0
[ 6.556798] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.556849] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.705609] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.705637] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 6.705704] scsi6 : pata_marvell
[ 6.705823] scsi7 : pata_marvell
[ 6.705885] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[ 6.705887] ata8: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[ 6.867439] ata7.00: ATAPI: ASUS DRW-1814BL, 1.10, max UDMA/66
[ 6.884109] ata7.00: configured for UDMA/66
[ 6.974640] scsi 6:0:0:0: CD-ROM ASUS DRW-1814BL 1.10 PQ: 0 ANSI: 5
[ 6.974788] scsi 6:0:0:0: Attached scsi generic sg2 type 5
[ 7.006678] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 7.138212] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 7.144969] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.144973] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 7.144976] ACPI: Device needs an ACPI driver
[ 7.145002] i801_smbus: probe of 0000:00:1f.3 failed with error -16
[ 7.151425] Linux video capture interface: v2.00
[ 7.177650] usb 6-1: New USB device found, idVendor=046d, idProduct=c051
[ 7.177654] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.177656] usb 6-1: Product: USB-PS/2 Optical Mouse
[ 7.177658] usb 6-1: Manufacturer: Logitech
[ 7.177766] usb 6-1: configuration #1 chosen from 1 choice
[ 7.190784] Uniform Multi-Platform E-IDE driver
[ 7.214809] usbcore: registered new interface driver hiddev
[ 7.228682] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 7.228799] saa7134 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.228805] saa7133[0]: found at 0000:05:00.0, rev: 209, irq: 16, latency: 64, mmio: 0xfebff800
[ 7.228810] saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]
[ 7.228862] saa7133[0]: board init: gpio is 200e000
[ 7.228867] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.230910] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input5
[ 7.231025] generic-usb 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 7.231040] usbcore: registered new interface driver usbhid
[ 7.231043] usbhid: v2.6:USB HID core driver
[ 7.271305] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.271309] Uniform CD-ROM driver Revision: 3.20
[ 7.271453] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 7.383339] saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 7.383347] saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
[ 7.383355] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e2 ff 22 00 c2
[ 7.383362] saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff 15 13 25 53 89 01 45 32 7b
[ 7.383369] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383376] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383383] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383391] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383398] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383405] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383412] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383419] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383426] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383434] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383441] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383452] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.383459] i2c-adapter i2c-0: Invalid 7-bit address 0x7a
[ 7.404598] usb 6-2: new low speed USB device using uhci_hcd and address 3
[ 7.463393] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[ 7.536671] tda829x 0-004b: setting tuner address to 61
[ 7.579645] usb 6-2: New USB device found, idVendor=045e, idProduct=00db
[ 7.579648] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.579651] usb 6-2: Product: Natural® Ergonomic Keyboard 4000
[ 7.579652] usb 6-2: Manufacturer: Microsoft
[ 7.579766] usb 6-2: configuration #1 chosen from 1 choice
[ 7.620006] tda829x 0-004b: type set to tda8290+75a
[ 7.640906] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input6
[ 7.641014] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-2/input0
[ 7.664789] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input7
[ 7.664874] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-2/input1
[ 11.286881] BUG: unable to handle kernel paging request at ffff880233ad9e8c
[ 11.286968] IP: [<ffffffffa02fb864>] ir_input_init+0x64/0x1a52 [ir_common]
[ 11.287025] PGD 80000000013e0063 PUD 15067 PMD 0
[ 11.287125] Oops: 0002 [#1] SMP
[ 11.287201] last sysfs file: /sys/module/i2c_core/initstate
[ 11.287231] CPU 3
[ 11.287282] Modules linked in: ir_kbd_i2c(+) joydev hid_microsoft tda827x tda8290 tuner sr_mod cdrom saa7134(+) ide_pci_generic usbhid hid ide_core ir_common pata_acpi v4l2_common videodev ata_generic snd_hda_codec_realtek v4l1_compat pata_marvell v4l2_compat_ioctl32 asus_atk0110 i2c_i801 videobuf_dma_sg intel_agp videobuf_core snd_hda_intel tveeprom snd_hda_codec uhci_hcd hwmon thermal via_rhine snd_hwdep snd_pcm i2c_core mii snd_timer snd sg ehci_hcd soundcore usbcore serio_raw processor pcspkr atl1e psmouse evdev snd_page_alloc button iTCO_wdt iTCO_vendor_support sd_mod crc_t10dif raid1 md_mod ext3 jbd mbcache jfs ahci libata scsi_mod [last unloaded: scsi_wait_scan]
[ 11.288932] Pid: 1815, comm: modprobe Not tainted 2.6.31-0.4 #1 P5Q-PRO
[ 11.288962] RIP: 0010:[<ffffffffa02fb864>] [<ffffffffa02fb864>] ir_input_init+0x64/0x1a52 [ir_common]
[ 11.289022] RSP: 0018:ffff880221165dc0 EFLAGS: 00010246
[ 11.289052] RAX: ffff8802251b0c18 RBX: ffff8802251b0c00 RCX: ffff880226815028
[ 11.289082] RDX: 0000000000000000 RSI: 000000006962732f RDI: ffff8802251b0e18
[ 11.289112] RBP: ffff88022101b800 R08: ffff880226815000 R09: 0000000000000004
[ 11.289124] R10: ffff8802251b0ea0 R11: 0000000000000000 R12: ffff880226815000
[ 11.289124] R13: ffff8802251b0ec0 R14: ffffffff815c86c0 R15: ffff88022150c230
[ 11.289124] FS: 00007f62036346f0(0000) GS:ffff88002807d000(0000) knlGS:0000000000000000
[ 11.289124] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 11.289124] CR2: ffff880233ad9e8c CR3: 000000022113a000 CR4: 00000000000006e0
[ 11.289124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 11.289124] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 11.289124] Process modprobe (pid: 1815, threadinfo ffff880221164000, task ffff880222a9ebd0)
[ 11.289124] Stack:
[ 11.289124] ffffffffa03a31e3 ffff8802251b0ea0 0000000000000063 0000000000000000
[ 11.289124] <0> ffffffffa03a3e60 ffff88022101b828 ffff88022101b804 ffff88022101b800
[ 11.289124] <0> ffffffffa03a3030 000000000060df10 ffffffffa01cc3a1 ffffffffa03a0048
[ 11.289124] Call Trace:
[ 11.289124] [<ffffffffa03a31e3>] ? __this_module+0x3103/0x39e4 [ir_kbd_i2c]
[ 11.289124] [<ffffffffa03a3e60>] ? cleanup_module+0x39c/0xd00 [ir_kbd_i2c]
[ 11.289124] [<ffffffffa03a3030>] ? __this_module+0x2f50/0x39e4 [ir_kbd_i2c]
[ 11.289124] [<ffffffffa01cc3a1>] ? i2c_verify_client+0x2c1/0x390 [i2c_core]
[ 11.289124] [<ffffffff812a4008>] ? driver_probe_device+0x88/0x180
[ 11.289124] [<ffffffff812a4193>] ? __driver_attach+0x93/0xa0
[ 11.289124] [<ffffffff812a4100>] ? __driver_attach+0x0/0xa0
[ 11.289124] [<ffffffff812a3788>] ? bus_for_each_dev+0x58/0x80
[ 11.289124] [<ffffffffa03a3f80>] ? cleanup_module+0x4bc/0xd00 [ir_kbd_i2c]
[ 11.289124] [<ffffffff812a2f46>] ? bus_add_driver+0xc6/0x290
[ 11.289124] [<ffffffffa03a7000>] ? init_module+0x0/0x18 [ir_kbd_i2c]
[ 11.289124] [<ffffffff812a447a>] ? driver_register+0x6a/0x130
[ 11.289124] [<ffffffffa03a7000>] ? init_module+0x0/0x18 [ir_kbd_i2c]
[ 11.289124] [<ffffffffa01cd0f0>] ? i2c_register_driver+0x30/0xd0 [i2c_core]
[ 11.289124] [<ffffffffa03a7000>] ? init_module+0x0/0x18 [ir_kbd_i2c]
[ 11.289124] [<ffffffff81001044>] ? do_one_initcall+0x34/0x170
[ 11.289124] [<ffffffff8108893f>] ? sys_init_module+0xdf/0x250
[ 11.289124] [<ffffffff81003f2b>] ? system_call_fastpath+0x16/0x1b
[ 11.289124] Code: 90 d0 00 00 00 41 c7 80 cc 00 00 00 04 00 00 00 41 c7 80 c8 00 00 00 80 00 00 00 31 d2 66 2e 0f 1f 84 00 00 00 00 00 8b 74 10 04 <f0> 0f ab 31 48 83 c2 04 48 81 fa 00 02 00 00 75 eb f0 41 80 60
[ 11.289124] RIP [<ffffffffa02fb864>] ir_input_init+0x64/0x1a52 [ir_common]
[ 11.289124] RSP <ffff880221165dc0>
[ 11.289124] CR2: ffff880233ad9e8c
[ 11.289124] ---[ end trace d9ab3f6ed1cfb88d ]---
[ 11.346818] saa7133[0]: registered device video0 [v4l2]
[ 11.346894] saa7133[0]: registered device vbi0
[ 11.346969] saa7133[0]: registered device radio0
[ 11.418715] saa7134 ALSA driver for DMA sound loaded
[ 11.418754] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 11.418799] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 16 registered as card 1
[ 13.694719] Adding 6000236k swap on /dev/sda1. Priority:0 extents:1 across:6000236k
[ 13.697219] Adding 6000236k swap on /dev/sdb1. Priority:0 extents:1 across:6000236k
[ 14.841828] device-mapper: uevent: version 1.0.3
[ 14.842353] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 48.270184] md: md1 stopped.
[ 48.271246] md: bind<sdb3>
[ 48.271375] md: bind<sda3>
[ 48.283978] md: raid10 personality registered for level 10
[ 48.284246] raid10: raid set md1 active with 2 out of 2 devices
[ 48.284295] md1: detected capacity change from 0 to 146549637120
[ 48.381965] md1: unknown partition table
[ 50.073491] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 50.138344] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 50.169365] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 50.169637] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 50.169672] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 50.169705] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 51.325347] alloc irq_desc for 29 on node 0
[ 51.325384] alloc kstat_irqs on node 0
[ 51.325424] ATL1E 0000:02:00.0: irq 29 for MSI/MSI-X
[ 51.325572] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 57.140579] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 57.142139] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 57.245737] eth1: link down
[ 57.246633] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 59.062061] Bluetooth: Core ver 2.15
[ 59.062170] NET: Registered protocol family 31
[ 59.062200] Bluetooth: HCI device and connection manager initialized
[ 59.062231] Bluetooth: HCI socket layer initialized
[ 59.069023] Bluetooth: L2CAP ver 2.13
[ 59.069056] Bluetooth: L2CAP socket layer initialized
[ 59.072152] Bluetooth: RFCOMM TTY layer initialized
[ 59.072187] Bluetooth: RFCOMM socket layer initialized
[ 59.072224] Bluetooth: RFCOMM ver 1.11
[ 59.545469] coretemp coretemp.0: Using relative temperature scale!
[ 59.545657] coretemp coretemp.1: Using relative temperature scale!
[ 59.545764] coretemp coretemp.2: Using relative temperature scale!
[ 59.545827] coretemp coretemp.3: Using relative temperature scale!
[ 59.874164] dummy0: no IPv6 routers present
[ 63.643767] radeonfb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 63.644253] radeonfb: Found Intel x86 BIOS ROM Image
[ 63.644284] radeonfb: Retrieved PLL infos from BIOS
[ 63.644314] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=400.00 Mhz, System=350.00 MHz
[ 63.644348] radeonfb: PLL min 20000 max 40000
[ 63.904412] i2c-adapter i2c-3: unable to read EDID block.
[ 64.047745] i2c-adapter i2c-3: unable to read EDID block.
[ 64.191078] i2c-adapter i2c-3: unable to read EDID block.
[ 64.494338] radeonfb: Monitor 1 type DFP found
[ 64.494367] radeonfb: EDID probed
[ 64.494396] radeonfb: Monitor 2 type no found
[ 64.511222] Console: switching to colour frame buffer device 210x65
[ 64.522426] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 64.522520] radeonfb (0000:01:00.0): ATI Radeon 5b63 "[c"
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.31] ir-kbd-i2c oops.
[not found] ` <200909161003.33090.pluto-PIIpFW8S9c0@public.gmane.org>
@ 2009-09-29 14:16 ` Jean Delvare
[not found] ` <20090929161629.2a5c8d30-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-09-30 8:16 ` Paweł Sikora
0 siblings, 2 replies; 6+ messages in thread
From: Jean Delvare @ 2009-09-29 14:16 UTC (permalink / raw)
To: Paweł Sikora
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, LMML
On Wed, 16 Sep 2009 10:03:32 +0200, Paweł Sikora wrote:
> On Wednesday 16 September 2009 08:57:01 Jean Delvare wrote:
> > Hi Pawel,
> >
> > I think this would be fixed by the following patch:
> > http://patchwork.kernel.org/patch/45707/
>
> still oopses. this time i've attached full dmesg.
Any news on this? Do you have a refined list of kernels which have the
bug and kernels which do not? Tried 2.6.32-rc1? Tried the v4l-dvb
repository?
Anyone else seeing this bug?
Your kernel stack trace doesn't look terribly reliable and I am not
able to come to any conclusion. The crash is supposed to happen in
ir_input_init(), but the stack trace doesn't lead there. I am also
skeptical about the +0x64/0x1a52, ir_input_init() is a rather small
function and I fail to see how it could be 6738 bytes in binary size.
Might be that the bug caused a stack corruption. Building a debug
kernel may help.
--
Jean Delvare
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.31] ir-kbd-i2c oops.
[not found] ` <20090929161629.2a5c8d30-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
@ 2009-09-29 23:26 ` Hermann Pitton
0 siblings, 0 replies; 6+ messages in thread
From: Hermann Pitton @ 2009-09-29 23:26 UTC (permalink / raw)
To: Jean Delvare
Cc: Paweł Sikora, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, LMML
Hi Jean,
Am Dienstag, den 29.09.2009, 16:16 +0200 schrieb Jean Delvare:
> On Wed, 16 Sep 2009 10:03:32 +0200, Paweł Sikora wrote:
> > On Wednesday 16 September 2009 08:57:01 Jean Delvare wrote:
> > > Hi Pawel,
> > >
> > > I think this would be fixed by the following patch:
> > > http://patchwork.kernel.org/patch/45707/
> >
> > still oopses. this time i've attached full dmesg.
>
> Any news on this? Do you have a refined list of kernels which have the
> bug and kernels which do not? Tried 2.6.32-rc1? Tried the v4l-dvb
> repository?
>
> Anyone else seeing this bug?
I can see you ask the other way round, but just in case, I don't have
that bug neither on some self compiled 2.6.30 with recent mercurial
v4l-dvb on some outdated Fedora nor on a
Linux localhost.localdomain 2.6.30.5-43.fc11.x86_64 #1 SMP Thu Aug 27
21:39:52 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
with my recently purchased older Pinnacle 310i.
Hm, there are different versions of that card, to have it mentioned,
obviously also with different remotes, and I can't tell how to identify
them.
> Your kernel stack trace doesn't look terribly reliable and I am not
> able to come to any conclusion. The crash is supposed to happen in
> ir_input_init(), but the stack trace doesn't lead there. I am also
> skeptical about the +0x64/0x1a52, ir_input_init() is a rather small
> function and I fail to see how it could be 6738 bytes in binary size.
> Might be that the bug caused a stack corruption. Building a debug
> kernel may help.
Cheers,
Hermann
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.31] ir-kbd-i2c oops.
2009-09-29 14:16 ` Jean Delvare
[not found] ` <20090929161629.2a5c8d30-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
@ 2009-09-30 8:16 ` Paweł Sikora
1 sibling, 0 replies; 6+ messages in thread
From: Paweł Sikora @ 2009-09-30 8:16 UTC (permalink / raw)
To: Jean Delvare; +Cc: linux-kernel, linux-i2c, LMML
[-- Attachment #1: Type: Text/Plain, Size: 1021 bytes --]
On Tuesday 29 September 2009 16:16:29 Jean Delvare wrote:
> On Wed, 16 Sep 2009 10:03:32 +0200, Paweł Sikora wrote:
> > On Wednesday 16 September 2009 08:57:01 Jean Delvare wrote:
> > > Hi Pawel,
> > >
> > > I think this would be fixed by the following patch:
> > > http://patchwork.kernel.org/patch/45707/
> >
> > still oopses. this time i've attached full dmesg.
>
> Any news on this? Do you have a refined list of kernels which have the
> bug and kernels which do not?
afaics in the 2.6.2{7,8}, the remote sends some noises to pc.
effect: random characters on terminal and unusable login prompt.
now in the 2.6.31, the kernel module oopses during udev loading.
so i've renamed the .ko to prevent loading.
> Tried 2.6.32-rc1? Tried the v4l-dvb repository?
no.
> I am also skeptical about the +0x64/0x1a52, ir_input_init() is a rather
> small function and I fail to see how it could be 6738 bytes in binary size.
i've attached asm dump of ir-common.ko
i found the '41 c7 80 cc ...' code in dump at adress 0x83e.
[-- Attachment #2: ir-common.asm --]
[-- Type: text/plain, Size: 31094 bytes --]
ir-common.ko: file format elf64-x86-64
Disassembly of section .text:
0000000000000000 <ir_extract_bits>:
0: 31 c0 xor %eax,%eax
2: ba 01 00 00 00 mov $0x1,%edx
7: eb 09 jmp 12 <ir_extract_bits+0x12>
9: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
10: d1 ef shr %edi
12: 40 f6 c6 01 test $0x1,%sil
16: 74 0d je 25 <ir_extract_bits+0x25>
18: 89 c1 mov %eax,%ecx
1a: 09 d1 or %edx,%ecx
1c: 40 f6 c7 01 test $0x1,%dil
20: 0f 45 c1 cmovne %ecx,%eax
23: 01 d2 add %edx,%edx
25: d1 ee shr %esi
27: 75 e7 jne 10 <ir_extract_bits+0x10>
29: f3 c3 repz retq
2b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
0000000000000030 <ir_decode_pulsedistance>:
30: 41 55 push %r13
32: c1 e6 05 shl $0x5,%esi
35: 85 f6 test %esi,%esi
37: 41 54 push %r12
39: 55 push %rbp
3a: 53 push %rbx
3b: 89 cb mov %ecx,%ebx
3d: 7e 58 jle 97 <ir_decode_pulsedistance+0x67>
3f: 31 c0 xor %eax,%eax
41: 45 31 c0 xor %r8d,%r8d
44: 41 bb 1f 00 00 00 mov $0x1f,%r11d
4a: 41 ba 01 00 00 00 mov $0x1,%r10d
50: eb 12 jmp 64 <ir_decode_pulsedistance+0x34>
52: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
58: 41 83 c0 01 add $0x1,%r8d
5c: 83 c0 01 add $0x1,%eax
5f: 41 39 f0 cmp %esi,%r8d
62: 7d 33 jge 97 <ir_decode_pulsedistance+0x67>
64: 44 89 c1 mov %r8d,%ecx
67: 45 89 c1 mov %r8d,%r9d
6a: 44 89 dd mov %r11d,%ebp
6d: 83 e1 1f and $0x1f,%ecx
70: 41 c1 f9 05 sar $0x5,%r9d
74: 45 89 d5 mov %r10d,%r13d
77: 29 cd sub %ecx,%ebp
79: 4d 63 c9 movslq %r9d,%r9
7c: 89 e9 mov %ebp,%ecx
7e: 41 d3 e5 shl %cl,%r13d
81: 46 85 2c 8f test %r13d,(%rdi,%r9,4)
85: 75 d1 jne 58 <ir_decode_pulsedistance+0x28>
87: 83 f8 1c cmp $0x1c,%eax
8a: 7f 1c jg a8 <ir_decode_pulsedistance+0x78>
8c: 41 83 c0 01 add $0x1,%r8d
90: 31 c0 xor %eax,%eax
92: 41 39 f0 cmp %esi,%r8d
95: 7c cd jl 64 <ir_decode_pulsedistance+0x34>
97: b8 ff ff ff ff mov $0xffffffff,%eax
9c: 5b pop %rbx
9d: 5d pop %rbp
9e: 41 5c pop %r12
a0: 41 5d pop %r13
a2: c3 retq
a3: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
a8: 41 39 f0 cmp %esi,%r8d
ab: 7d ea jge 97 <ir_decode_pulsedistance+0x67>
ad: 31 c0 xor %eax,%eax
af: 41 bb 1f 00 00 00 mov $0x1f,%r11d
b5: 41 ba 01 00 00 00 mov $0x1,%r10d
bb: eb 26 jmp e3 <ir_decode_pulsedistance+0xb3>
bd: 0f 1f 00 nopl (%rax)
c0: 44 89 c1 mov %r8d,%ecx
c3: 45 89 c1 mov %r8d,%r9d
c6: 44 89 dd mov %r11d,%ebp
c9: 83 e1 1f and $0x1f,%ecx
cc: 41 c1 f9 05 sar $0x5,%r9d
d0: 45 89 d5 mov %r10d,%r13d
d3: 29 cd sub %ecx,%ebp
d5: 4d 63 c9 movslq %r9d,%r9
d8: 89 e9 mov %ebp,%ecx
da: 41 d3 e5 shl %cl,%r13d
dd: 46 85 2c 8f test %r13d,(%rdi,%r9,4)
e1: 75 0c jne ef <ir_decode_pulsedistance+0xbf>
e3: 41 83 c0 01 add $0x1,%r8d
e7: 83 c0 01 add $0x1,%eax
ea: 41 39 f0 cmp %esi,%r8d
ed: 7c d1 jl c0 <ir_decode_pulsedistance+0x90>
ef: 83 f8 06 cmp $0x6,%eax
f2: 7e a3 jle 97 <ir_decode_pulsedistance+0x67>
f4: 31 c0 xor %eax,%eax
f6: 41 39 f0 cmp %esi,%r8d
f9: 7d a1 jge 9c <ir_decode_pulsedistance+0x6c>
fb: 8d 14 13 lea (%rbx,%rdx,1),%edx
fe: 31 ed xor %ebp,%ebp
100: 41 bb 01 00 00 00 mov $0x1,%r11d
106: 45 31 d2 xor %r10d,%r10d
109: 41 b9 1f 00 00 00 mov $0x1f,%r9d
10f: bb 01 00 00 00 mov $0x1,%ebx
114: 41 89 d4 mov %edx,%r12d
117: 41 c1 ec 1f shr $0x1f,%r12d
11b: 41 01 d4 add %edx,%r12d
11e: ba 01 00 00 00 mov $0x1,%edx
123: 41 d1 fc sar %r12d
126: eb 1d jmp 145 <ir_decode_pulsedistance+0x115>
128: 0f 1f 84 00 00 00 00 nopl 0x0(%rax,%rax,1)
12f: 00
130: 85 c0 test %eax,%eax
132: 75 54 jne 188 <ir_decode_pulsedistance+0x158>
134: 41 ba 01 00 00 00 mov $0x1,%r10d
13a: 31 d2 xor %edx,%edx
13c: 41 83 c0 01 add $0x1,%r8d
140: 41 39 f0 cmp %esi,%r8d
143: 7d 50 jge 195 <ir_decode_pulsedistance+0x165>
145: 44 89 c1 mov %r8d,%ecx
148: 44 89 c0 mov %r8d,%eax
14b: 45 89 cd mov %r9d,%r13d
14e: 83 e1 1f and $0x1f,%ecx
151: c1 f8 05 sar $0x5,%eax
154: 41 29 cd sub %ecx,%r13d
157: 48 98 cltq
159: 44 89 e9 mov %r13d,%ecx
15c: 41 89 dd mov %ebx,%r13d
15f: 41 d3 e5 shl %cl,%r13d
162: 44 85 2c 87 test %r13d,(%rdi,%rax,4)
166: 0f 95 c0 setne %al
169: 85 d2 test %edx,%edx
16b: 0f b6 c0 movzbl %al,%eax
16e: 75 c0 jne 130 <ir_decode_pulsedistance+0x100>
170: 85 c0 test %eax,%eax
172: 74 1b je 18f <ir_decode_pulsedistance+0x15f>
174: 89 e8 mov %ebp,%eax
176: 44 09 d8 or %r11d,%eax
179: 45 39 d4 cmp %r10d,%r12d
17c: 0f 4c e8 cmovl %eax,%ebp
17f: 45 01 db add %r11d,%r11d
182: 41 83 fb 01 cmp $0x1,%r11d
186: 74 0d je 195 <ir_decode_pulsedistance+0x165>
188: ba 01 00 00 00 mov $0x1,%edx
18d: eb ad jmp 13c <ir_decode_pulsedistance+0x10c>
18f: 41 83 c2 01 add $0x1,%r10d
193: eb a7 jmp 13c <ir_decode_pulsedistance+0x10c>
195: 89 e8 mov %ebp,%eax
197: e9 00 ff ff ff jmpq 9c <ir_decode_pulsedistance+0x6c>
19c: 0f 1f 40 00 nopl 0x0(%rax)
00000000000001a0 <ir_decode_biphase>:
1a0: 41 56 push %r14
1a2: 44 8b 0f mov (%rdi),%r9d
1a5: 45 31 c0 xor %r8d,%r8d
1a8: b8 01 00 00 00 mov $0x1,%eax
1ad: 41 55 push %r13
1af: 41 54 push %r12
1b1: 55 push %rbp
1b2: 89 cd mov %ecx,%ebp
1b4: 53 push %rbx
1b5: bb 1f 00 00 00 mov $0x1f,%ebx
1ba: eb 12 jmp 1ce <ir_decode_biphase+0x2e>
1bc: 0f 1f 40 00 nopl 0x0(%rax)
1c0: 41 83 c0 01 add $0x1,%r8d
1c4: 41 83 f8 20 cmp $0x20,%r8d
1c8: 0f 84 f2 00 00 00 je 2c0 <ir_decode_biphase+0x120>
1ce: 44 89 c1 mov %r8d,%ecx
1d1: 41 89 da mov %ebx,%r10d
1d4: 41 89 c6 mov %eax,%r14d
1d7: 83 e1 1f and $0x1f,%ecx
1da: 41 29 ca sub %ecx,%r10d
1dd: 44 89 d1 mov %r10d,%ecx
1e0: 41 d3 e6 shl %cl,%r14d
1e3: 45 85 ce test %r9d,%r14d
1e6: 74 d8 je 1c0 <ir_decode_biphase+0x20>
1e8: 41 bb 01 00 00 00 mov $0x1,%r11d
1ee: c1 e6 05 shl $0x5,%esi
1f1: 44 39 c6 cmp %r8d,%esi
1f4: 0f 8e ce 00 00 00 jle 2c8 <ir_decode_biphase+0x128>
1fa: 85 ed test %ebp,%ebp
1fc: 0f 88 c6 00 00 00 js 2c8 <ir_decode_biphase+0x128>
202: b8 01 00 00 00 mov $0x1,%eax
207: 45 31 d2 xor %r10d,%r10d
20a: 45 31 c9 xor %r9d,%r9d
20d: 41 bd 1f 00 00 00 mov $0x1f,%r13d
213: 41 bc 01 00 00 00 mov $0x1,%r12d
219: eb 24 jmp 23f <ir_decode_biphase+0x9f>
21b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
220: 41 83 c1 01 add $0x1,%r9d
224: 41 83 c2 01 add $0x1,%r10d
228: 41 83 c0 01 add $0x1,%r8d
22c: 44 39 c6 cmp %r8d,%esi
22f: 7e 6f jle 2a0 <ir_decode_biphase+0x100>
231: 41 39 e9 cmp %ebp,%r9d
234: 7f 6a jg 2a0 <ir_decode_biphase+0x100>
236: 41 83 fa 01 cmp $0x1,%r10d
23a: 7f 64 jg 2a0 <ir_decode_biphase+0x100>
23c: 41 89 cb mov %ecx,%r11d
23f: 41 8d 58 1f lea 0x1f(%r8),%ebx
243: 45 85 c0 test %r8d,%r8d
246: 45 89 c6 mov %r8d,%r14d
249: 41 0f 49 d8 cmovns %r8d,%ebx
24d: 41 c1 fe 1f sar $0x1f,%r14d
251: 41 c1 ee 1b shr $0x1b,%r14d
255: c1 fb 05 sar $0x5,%ebx
258: 43 8d 0c 30 lea (%r8,%r14,1),%ecx
25c: 48 63 db movslq %ebx,%rbx
25f: 83 e1 1f and $0x1f,%ecx
262: 44 29 f1 sub %r14d,%ecx
265: 45 89 ee mov %r13d,%r14d
268: 41 29 ce sub %ecx,%r14d
26b: 44 89 f1 mov %r14d,%ecx
26e: 45 89 e6 mov %r12d,%r14d
271: 41 d3 e6 shl %cl,%r14d
274: 44 85 34 9f test %r14d,(%rdi,%rbx,4)
278: 0f 95 c1 setne %cl
27b: 0f b6 c9 movzbl %cl,%ecx
27e: 41 39 cb cmp %ecx,%r11d
281: 74 2d je 2b0 <ir_decode_biphase+0x110>
283: 44 39 ca cmp %r9d,%edx
286: 7f 98 jg 220 <ir_decode_biphase+0x80>
288: 01 c0 add %eax,%eax
28a: 41 83 c0 01 add $0x1,%r8d
28e: 45 31 d2 xor %r10d,%r10d
291: 09 c8 or %ecx,%eax
293: 44 39 c6 cmp %r8d,%esi
296: 41 b9 01 00 00 00 mov $0x1,%r9d
29c: 7f 93 jg 231 <ir_decode_biphase+0x91>
29e: 66 90 xchg %ax,%ax
2a0: 5b pop %rbx
2a1: 5d pop %rbp
2a2: 41 5c pop %r12
2a4: 41 5d pop %r13
2a6: 41 5e pop %r14
2a8: c3 retq
2a9: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
2b0: 41 83 c1 01 add $0x1,%r9d
2b4: e9 6f ff ff ff jmpq 228 <ir_decode_biphase+0x88>
2b9: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
2c0: 45 31 db xor %r11d,%r11d
2c3: e9 26 ff ff ff jmpq 1ee <ir_decode_biphase+0x4e>
2c8: b8 01 00 00 00 mov $0x1,%eax
2cd: 0f 1f 00 nopl (%rax)
2d0: eb ce jmp 2a0 <ir_decode_biphase+0x100>
2d2: 66 66 66 66 66 2e 0f nopw %cs:0x0(%rax,%rax,1)
2d9: 1f 84 00 00 00 00 00
00000000000002e0 <ir_dump_samples>:
2e0: 41 56 push %r14
2e2: 31 c0 xor %eax,%eax
2e4: 41 55 push %r13
2e6: 41 54 push %r12
2e8: 49 89 fc mov %rdi,%r12
2eb: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
2f2: 55 push %rbp
2f3: 89 f5 mov %esi,%ebp
2f5: c1 e5 05 shl $0x5,%ebp
2f8: 53 push %rbx
2f9: e8 00 00 00 00 callq 2fe <ir_dump_samples+0x1e>
2fe: 85 ed test %ebp,%ebp
300: 7e 5d jle 35f <ir_dump_samples+0x7f>
302: 31 d2 xor %edx,%edx
304: 31 db xor %ebx,%ebx
306: 41 be 1f 00 00 00 mov $0x1f,%r14d
30c: 41 bd 01 00 00 00 mov $0x1,%r13d
312: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
318: 89 d9 mov %ebx,%ecx
31a: 44 89 f6 mov %r14d,%esi
31d: 89 d8 mov %ebx,%eax
31f: 83 e1 1f and $0x1f,%ecx
322: c1 f8 05 sar $0x5,%eax
325: 29 ce sub %ecx,%esi
327: 48 98 cltq
329: 89 f1 mov %esi,%ecx
32b: 44 89 ee mov %r13d,%esi
32e: d3 e6 shl %cl,%esi
330: 89 f1 mov %esi,%ecx
332: 41 85 0c 84 test %ecx,(%r12,%rax,4)
336: 48 c7 c6 00 00 00 00 mov $0x0,%rsi
33d: 74 41 je 380 <ir_dump_samples+0xa0>
33f: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
346: 31 c0 xor %eax,%eax
348: e8 00 00 00 00 callq 34d <ir_dump_samples+0x6d>
34d: ba 01 00 00 00 mov $0x1,%edx
352: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
358: 83 c3 01 add $0x1,%ebx
35b: 39 eb cmp %ebp,%ebx
35d: 7c b9 jl 318 <ir_dump_samples+0x38>
35f: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
366: 31 c0 xor %eax,%eax
368: e8 00 00 00 00 callq 36d <ir_dump_samples+0x8d>
36d: 5b pop %rbx
36e: 5d pop %rbp
36f: 41 5c pop %r12
371: 41 5d pop %r13
373: 31 c0 xor %eax,%eax
375: 41 5e pop %r14
377: c3 retq
378: 0f 1f 84 00 00 00 00 nopl 0x0(%rax,%rax,1)
37f: 00
380: 85 d2 test %edx,%edx
382: 74 d4 je 358 <ir_dump_samples+0x78>
384: 48 c7 c6 00 00 00 00 mov $0x0,%rsi
38b: eb b2 jmp 33f <ir_dump_samples+0x5f>
38d: 0f 1f 00 nopl (%rax)
390: 55 push %rbp
391: 48 89 f5 mov %rsi,%rbp
394: 53 push %rbx
395: 48 89 fb mov %rdi,%rbx
398: 48 83 ec 08 sub $0x8,%rsp
39c: 8b 96 0c 02 00 00 mov 0x20c(%rsi),%edx
3a2: 85 d2 test %edx,%edx
3a4: 74 37 je 3dd <ir_dump_samples+0xfd>
3a6: 8b 05 00 00 00 00 mov 0x0(%rip),%eax # 3ac <ir_dump_samples+0xcc>
3ac: 85 c0 test %eax,%eax
3ae: 7f 54 jg 404 <ir_dump_samples+0x124>
3b0: 31 c9 xor %ecx,%ecx
3b2: 83 bd 10 02 00 00 00 cmpl $0x0,0x210(%rbp)
3b9: 48 89 df mov %rbx,%rdi
3bc: be 01 00 00 00 mov $0x1,%esi
3c1: 0f 95 c1 setne %cl
3c4: e8 00 00 00 00 callq 3c9 <ir_dump_samples+0xe9>
3c9: 48 83 c4 08 add $0x8,%rsp
3cd: 48 89 df mov %rbx,%rdi
3d0: 31 c9 xor %ecx,%ecx
3d2: 5b pop %rbx
3d3: 5d pop %rbp
3d4: 31 d2 xor %edx,%edx
3d6: 31 f6 xor %esi,%esi
3d8: e9 00 00 00 00 jmpq 3dd <ir_dump_samples+0xfd>
3dd: 8b 8e 04 02 00 00 mov 0x204(%rsi),%ecx
3e3: 8b 96 08 02 00 00 mov 0x208(%rsi),%edx
3e9: 31 c0 xor %eax,%eax
3eb: 44 8b 86 10 02 00 00 mov 0x210(%rsi),%r8d
3f2: 48 8b 37 mov (%rdi),%rsi
3f5: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
3fc: 5b pop %rbx
3fd: 5b pop %rbx
3fe: 5d pop %rbp
3ff: e9 00 00 00 00 jmpq 404 <ir_dump_samples+0x124>
404: 8b 8e 10 02 00 00 mov 0x210(%rsi),%ecx
40a: 48 8b 37 mov (%rdi),%rsi
40d: 31 c0 xor %eax,%eax
40f: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
416: e8 00 00 00 00 callq 41b <ir_dump_samples+0x13b>
41b: 8b 95 0c 02 00 00 mov 0x20c(%rbp),%edx
421: eb 8d jmp 3b0 <ir_dump_samples+0xd0>
423: 66 66 66 66 2e 0f 1f nopw %cs:0x0(%rax,%rax,1)
42a: 84 00 00 00 00 00
0000000000000430 <ir_input_keydown>:
430: 48 83 ec 28 sub $0x28,%rsp
434: 4c 89 64 24 20 mov %r12,0x20(%rsp)
439: 45 31 e4 xor %r12d,%r12d
43c: 83 fa 7f cmp $0x7f,%edx
43f: 48 89 5c 24 10 mov %rbx,0x10(%rsp)
444: 48 89 6c 24 18 mov %rbp,0x18(%rsp)
449: 48 89 f3 mov %rsi,%rbx
44c: 48 89 fd mov %rdi,%rbp
44f: 77 07 ja 458 <ir_input_keydown+0x28>
451: 89 d0 mov %edx,%eax
453: 44 8b 64 86 04 mov 0x4(%rsi,%rax,4),%r12d
458: 8b bb 10 02 00 00 mov 0x210(%rbx),%edi
45e: 85 ff test %edi,%edi
460: 75 3e jne 4a0 <ir_input_keydown+0x70>
462: 89 93 08 02 00 00 mov %edx,0x208(%rbx)
468: 89 8b 04 02 00 00 mov %ecx,0x204(%rbx)
46e: 48 89 de mov %rbx,%rsi
471: 44 89 a3 0c 02 00 00 mov %r12d,0x20c(%rbx)
478: c7 83 10 02 00 00 01 movl $0x1,0x210(%rbx)
47f: 00 00 00
482: 48 89 ef mov %rbp,%rdi
485: 48 8b 5c 24 10 mov 0x10(%rsp),%rbx
48a: 48 8b 6c 24 18 mov 0x18(%rsp),%rbp
48f: 4c 8b 64 24 20 mov 0x20(%rsp),%r12
494: 48 83 c4 28 add $0x28,%rsp
498: e9 f3 fe ff ff jmpq 390 <ir_dump_samples+0xb0>
49d: 0f 1f 00 nopl (%rax)
4a0: 44 3b a3 0c 02 00 00 cmp 0x20c(%rbx),%r12d
4a7: 74 2d je 4d6 <ir_input_keydown+0xa6>
4a9: c7 83 10 02 00 00 00 movl $0x0,0x210(%rbx)
4b0: 00 00 00
4b3: 48 89 de mov %rbx,%rsi
4b6: 48 89 ef mov %rbp,%rdi
4b9: 89 54 24 08 mov %edx,0x8(%rsp)
4bd: 89 0c 24 mov %ecx,(%rsp)
4c0: e8 cb fe ff ff callq 390 <ir_dump_samples+0xb0>
4c5: 8b b3 10 02 00 00 mov 0x210(%rbx),%esi
4cb: 8b 54 24 08 mov 0x8(%rsp),%edx
4cf: 8b 0c 24 mov (%rsp),%ecx
4d2: 85 f6 test %esi,%esi
4d4: 74 8c je 462 <ir_input_keydown+0x32>
4d6: 48 8b 5c 24 10 mov 0x10(%rsp),%rbx
4db: 48 8b 6c 24 18 mov 0x18(%rsp),%rbp
4e0: 4c 8b 64 24 20 mov 0x20(%rsp),%r12
4e5: 48 83 c4 28 add $0x28,%rsp
4e9: c3 retq
4ea: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
00000000000004f0 <ir_input_nokey>:
4f0: 48 83 ec 08 sub $0x8,%rsp
4f4: 44 8b 86 10 02 00 00 mov 0x210(%rsi),%r8d
4fb: 45 85 c0 test %r8d,%r8d
4fe: 75 08 jne 508 <ir_input_nokey+0x18>
500: 48 83 c4 08 add $0x8,%rsp
504: c3 retq
505: 0f 1f 00 nopl (%rax)
508: c7 86 10 02 00 00 00 movl $0x0,0x210(%rsi)
50f: 00 00 00
512: 48 83 c4 08 add $0x8,%rsp
516: e9 75 fe ff ff jmpq 390 <ir_dump_samples+0xb0>
51b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
0000000000000520 <ir_rc5_timer_keyup>:
520: 44 8b 0d 00 00 00 00 mov 0x0(%rip),%r9d # 527 <ir_rc5_timer_keyup+0x7>
527: 53 push %rbx
528: 48 89 fb mov %rdi,%rbx
52b: 45 85 c9 test %r9d,%r9d
52e: 7f 0d jg 53d <ir_rc5_timer_keyup+0x1d>
530: 48 8d 73 08 lea 0x8(%rbx),%rsi
534: 48 8b 3b mov (%rbx),%rdi
537: 5b pop %rbx
538: e9 00 00 00 00 jmpq 53d <ir_rc5_timer_keyup+0x1d>
53d: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
544: 31 c0 xor %eax,%eax
546: e8 00 00 00 00 callq 54b <ir_rc5_timer_keyup+0x2b>
54b: eb e3 jmp 530 <ir_rc5_timer_keyup+0x10>
54d: 0f 1f 00 nopl (%rax)
0000000000000550 <ir_rc5_timer_end>:
550: 48 83 ec 48 sub $0x48,%rsp
554: 48 89 5c 24 20 mov %rbx,0x20(%rsp)
559: 48 89 fb mov %rdi,%rbx
55c: 48 8d 7c 24 10 lea 0x10(%rsp),%rdi
561: 4c 89 64 24 30 mov %r12,0x30(%rsp)
566: 48 89 6c 24 28 mov %rbp,0x28(%rsp)
56b: 4c 89 6c 24 38 mov %r13,0x38(%rsp)
570: 4c 89 74 24 40 mov %r14,0x40(%rsp)
575: 4c 8b 25 00 00 00 00 mov 0x0(%rip),%r12 # 57c <ir_rc5_timer_end+0x2c>
57c: e8 00 00 00 00 callq 581 <ir_rc5_timer_end+0x31>
581: 48 8b 44 24 10 mov 0x10(%rsp),%rax
586: 48 2b 83 b0 03 00 00 sub 0x3b0(%rbx),%rax
58d: 48 83 f8 01 cmp $0x1,%rax
591: 0f 8e a9 00 00 00 jle 640 <ir_rc5_timer_end+0xf0>
597: c7 83 c0 03 00 00 00 movl $0x0,0x3c0(%rbx)
59e: 00 00 00
5a1: 83 bb a4 03 00 00 13 cmpl $0x13,0x3a4(%rbx)
5a8: 76 66 jbe 610 <ir_rc5_timer_end+0xc0>
5aa: 8b 93 a8 03 00 00 mov 0x3a8(%rbx),%edx
5b0: 8b 8b 70 02 00 00 mov 0x270(%rbx),%ecx
5b6: 31 f6 xor %esi,%esi
5b8: 31 ed xor %ebp,%ebp
5ba: d3 e2 shl %cl,%edx
5bc: 83 ca 01 or $0x1,%edx
5bf: 89 93 a8 03 00 00 mov %edx,0x3a8(%rbx)
5c5: 89 d0 mov %edx,%eax
5c7: 89 c1 mov %eax,%ecx
5c9: 01 ed add %ebp,%ebp
5cb: c1 e8 02 shr $0x2,%eax
5ce: 83 e1 03 and $0x3,%ecx
5d1: 83 f9 01 cmp $0x1,%ecx
5d4: 0f 84 f6 00 00 00 je 6d0 <ir_rc5_timer_end+0x180>
5da: 83 f9 03 cmp $0x3,%ecx
5dd: 0f 84 a5 00 00 00 je 688 <ir_rc5_timer_end+0x138>
5e3: 83 c6 01 add $0x1,%esi
5e6: 83 fe 0e cmp $0xe,%esi
5e9: 75 dc jne 5c7 <ir_rc5_timer_end+0x77>
5eb: 44 8b 2d 00 00 00 00 mov 0x0(%rip),%r13d # 5f2 <ir_rc5_timer_end+0xa2>
5f2: 45 85 ed test %r13d,%r13d
5f5: 0f 8f bb 01 00 00 jg 7b6 <ir_rc5_timer_end+0x266>
5fb: 41 89 ed mov %ebp,%r13d
5fe: 41 c1 ed 0c shr $0xc,%r13d
602: 41 83 e5 03 and $0x3,%r13d
606: e9 92 00 00 00 jmpq 69d <ir_rc5_timer_end+0x14d>
60b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
610: 8b 05 00 00 00 00 mov 0x0(%rip),%eax # 616 <ir_rc5_timer_end+0xc6>
616: 85 c0 test %eax,%eax
618: 0f 8f 54 01 00 00 jg 772 <ir_rc5_timer_end+0x222>
61e: 48 8b 5c 24 20 mov 0x20(%rsp),%rbx
623: 48 8b 6c 24 28 mov 0x28(%rsp),%rbp
628: 4c 8b 64 24 30 mov 0x30(%rsp),%r12
62d: 4c 8b 6c 24 38 mov 0x38(%rsp),%r13
632: 4c 8b 74 24 40 mov 0x40(%rsp),%r14
637: 48 83 c4 48 add $0x48,%rsp
63b: c3 retq
63c: 0f 1f 40 00 nopl 0x0(%rax)
640: 48 8b 54 24 18 mov 0x18(%rsp),%rdx
645: 2b 93 b8 03 00 00 sub 0x3b8(%rbx),%edx
64b: 69 c0 40 42 0f 00 imul $0xf4240,%eax,%eax
651: c7 83 c0 03 00 00 00 movl $0x0,0x3c0(%rbx)
658: 00 00 00
65b: 8d 04 02 lea (%rdx,%rax,1),%eax
65e: 3d 5f 6d 00 00 cmp $0x6d5f,%eax
663: 0f 87 38 ff ff ff ja 5a1 <ir_rc5_timer_end+0x51>
669: 8b 15 00 00 00 00 mov 0x0(%rip),%edx # 66f <ir_rc5_timer_end+0x11f>
66f: 85 d2 test %edx,%edx
671: 7e ab jle 61e <ir_rc5_timer_end+0xce>
673: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
67a: 31 c0 xor %eax,%eax
67c: e8 00 00 00 00 callq 681 <ir_rc5_timer_end+0x131>
681: eb 9b jmp 61e <ir_rc5_timer_end+0xce>
683: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
688: 44 8b 35 00 00 00 00 mov 0x0(%rip),%r14d # 68f <ir_rc5_timer_end+0x13f>
68f: 45 85 f6 test %r14d,%r14d
692: 0f 8f f3 00 00 00 jg 78b <ir_rc5_timer_end+0x23b>
698: 45 31 ed xor %r13d,%r13d
69b: 31 ed xor %ebp,%ebp
69d: 44 39 ab 74 02 00 00 cmp %r13d,0x274(%rbx)
6a4: 74 3a je 6e0 <ir_rc5_timer_end+0x190>
6a6: 44 8b 1d 00 00 00 00 mov 0x0(%rip),%r11d # 6ad <ir_rc5_timer_end+0x15d>
6ad: 45 85 db test %r11d,%r11d
6b0: 0f 8e 68 ff ff ff jle 61e <ir_rc5_timer_end+0xce>
6b6: 44 89 ee mov %r13d,%esi
6b9: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
6c0: 31 c0 xor %eax,%eax
6c2: e8 00 00 00 00 callq 6c7 <ir_rc5_timer_end+0x177>
6c7: e9 52 ff ff ff jmpq 61e <ir_rc5_timer_end+0xce>
6cc: 0f 1f 40 00 nopl 0x0(%rax)
6d0: 83 cd 01 or $0x1,%ebp
6d3: e9 0b ff ff ff jmpq 5e3 <ir_rc5_timer_end+0x93>
6d8: 0f 1f 84 00 00 00 00 nopl 0x0(%rax,%rax,1)
6df: 00
6e0: 89 e8 mov %ebp,%eax
6e2: c1 e8 06 shr $0x6,%eax
6e5: 83 e0 1f and $0x1f,%eax
6e8: 3b 83 78 02 00 00 cmp 0x278(%rbx),%eax
6ee: 0f 85 2a ff ff ff jne 61e <ir_rc5_timer_end+0xce>
6f4: 8b 8b a0 03 00 00 mov 0x3a0(%rbx),%ecx
6fa: 89 ea mov %ebp,%edx
6fc: 41 89 ed mov %ebp,%r13d
6ff: c1 ea 0b shr $0xb,%edx
702: 41 83 e5 3f and $0x3f,%r13d
706: 83 e2 01 and $0x1,%edx
709: 89 c8 mov %ecx,%eax
70b: c1 e8 0b shr $0xb,%eax
70e: 83 e0 01 and $0x1,%eax
711: 39 d0 cmp %edx,%eax
713: 74 52 je 767 <ir_rc5_timer_end+0x217>
715: 44 8b 15 00 00 00 00 mov 0x0(%rip),%r10d # 71c <ir_rc5_timer_end+0x1cc>
71c: 45 85 d2 test %r10d,%r10d
71f: 7f 7f jg 7a0 <ir_rc5_timer_end+0x250>
721: 4c 8d 73 08 lea 0x8(%rbx),%r14
725: 48 8b 3b mov (%rbx),%rdi
728: 4c 89 f6 mov %r14,%rsi
72b: e8 00 00 00 00 callq 730 <ir_rc5_timer_end+0x1e0>
730: 48 8b 3b mov (%rbx),%rdi
733: 44 89 e9 mov %r13d,%ecx
736: 44 89 ea mov %r13d,%edx
739: 4c 89 f6 mov %r14,%rsi
73c: e8 00 00 00 00 callq 741 <ir_rc5_timer_end+0x1f1>
741: 8b bb 7c 02 00 00 mov 0x27c(%rbx),%edi
747: e8 00 00 00 00 callq 74c <ir_rc5_timer_end+0x1fc>
74c: 48 8d bb 50 03 00 00 lea 0x350(%rbx),%rdi
753: 4a 8d 34 20 lea (%rax,%r12,1),%rsi
757: e8 00 00 00 00 callq 75c <ir_rc5_timer_end+0x20c>
75c: 89 ab a0 03 00 00 mov %ebp,0x3a0(%rbx)
762: e9 b7 fe ff ff jmpq 61e <ir_rc5_timer_end+0xce>
767: 83 e1 3f and $0x3f,%ecx
76a: 44 39 e9 cmp %r13d,%ecx
76d: 75 a6 jne 715 <ir_rc5_timer_end+0x1c5>
76f: 90 nop
770: eb cf jmp 741 <ir_rc5_timer_end+0x1f1>
772: 8b b3 a8 03 00 00 mov 0x3a8(%rbx),%esi
778: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
77f: 31 c0 xor %eax,%eax
781: e8 00 00 00 00 callq 786 <ir_rc5_timer_end+0x236>
786: e9 93 fe ff ff jmpq 61e <ir_rc5_timer_end+0xce>
78b: 89 d6 mov %edx,%esi
78d: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
794: 31 c0 xor %eax,%eax
796: e8 00 00 00 00 callq 79b <ir_rc5_timer_end+0x24b>
79b: e9 f8 fe ff ff jmpq 698 <ir_rc5_timer_end+0x148>
7a0: 44 89 ee mov %r13d,%esi
7a3: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
7aa: 31 c0 xor %eax,%eax
7ac: e8 00 00 00 00 callq 7b1 <ir_rc5_timer_end+0x261>
7b1: e9 6b ff ff ff jmpq 721 <ir_rc5_timer_end+0x1d1>
7b6: 41 89 ed mov %ebp,%r13d
7b9: 41 89 e9 mov %ebp,%r9d
7bc: 41 89 e8 mov %ebp,%r8d
7bf: 41 c1 ed 0c shr $0xc,%r13d
7c3: 89 e8 mov %ebp,%eax
7c5: 41 c1 e9 06 shr $0x6,%r9d
7c9: 83 e0 3f and $0x3f,%eax
7cc: 41 83 e5 03 and $0x3,%r13d
7d0: 41 c1 e8 0b shr $0xb,%r8d
7d4: 89 04 24 mov %eax,(%rsp)
7d7: 41 83 e1 1f and $0x1f,%r9d
7db: 41 83 e0 01 and $0x1,%r8d
7df: 44 89 e9 mov %r13d,%ecx
7e2: 89 ee mov %ebp,%esi
7e4: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
7eb: 31 c0 xor %eax,%eax
7ed: e8 00 00 00 00 callq 7f2 <ir_rc5_timer_end+0x2a2>
7f2: e9 a6 fe ff ff jmpq 69d <ir_rc5_timer_end+0x14d>
7f7: 66 0f 1f 84 00 00 00 nopw 0x0(%rax,%rax,1)
7fe: 00 00
0000000000000800 <ir_input_init>:
800: 48 85 c9 test %rcx,%rcx
803: 89 16 mov %edx,(%rsi)
805: 49 89 f8 mov %rdi,%r8
808: 48 89 f0 mov %rsi,%rax
80b: 48 8d 56 04 lea 0x4(%rsi),%rdx
80f: 74 22 je 833 <ir_input_init+0x33>
811: f6 c2 04 test $0x4,%dl
814: 48 89 d7 mov %rdx,%rdi
817: 48 89 ce mov %rcx,%rsi
81a: 41 b9 00 02 00 00 mov $0x200,%r9d
820: 75 77 jne 899 <ir_input_init+0x99>
822: 44 89 c9 mov %r9d,%ecx
825: c1 e9 03 shr $0x3,%ecx
828: 41 83 e1 04 and $0x4,%r9d
82c: 89 c9 mov %ecx,%ecx
82e: f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi)
831: 75 60 jne 893 <ir_input_init+0x93>
833: 49 8d 48 28 lea 0x28(%r8),%rcx
837: 49 89 90 d0 00 00 00 mov %rdx,0xd0(%r8)
83e: 41 c7 80 cc 00 00 00 movl $0x4,0xcc(%r8)
845: 04 00 00 00
849: 41 c7 80 c8 00 00 00 movl $0x80,0xc8(%r8)
850: 80 00 00 00
854: 31 d2 xor %edx,%edx
856: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1)
85d: 00 00 00
860: 8b 74 10 04 mov 0x4(%rax,%rdx,1),%esi
864: f0 0f ab 31 lock bts %esi,(%rcx)
868: 48 83 c2 04 add $0x4,%rdx
86c: 48 81 fa 00 02 00 00 cmp $0x200,%rdx
873: 75 eb jne 860 <ir_input_init+0x60>
875: f0 41 80 60 28 fe lock andb $0xfe,0x28(%r8)
87b: f0 41 80 48 20 02 lock orb $0x2,0x20(%r8)
881: 8b 0d 00 00 00 00 mov 0x0(%rip),%ecx # 887 <ir_input_init+0x87>
887: 85 c9 test %ecx,%ecx
889: 74 06 je 891 <ir_input_init+0x91>
88b: f0 41 80 48 22 10 lock orb $0x10,0x22(%r8)
891: f3 c3 repz retq
893: 8b 0e mov (%rsi),%ecx
895: 89 0f mov %ecx,(%rdi)
897: eb 9a jmp 833 <ir_input_init+0x33>
899: 8b 09 mov (%rcx),%ecx
89b: 48 8d 78 08 lea 0x8(%rax),%rdi
89f: 48 83 c6 04 add $0x4,%rsi
8a3: 66 41 b9 fc 01 mov $0x1fc,%r9w
8a8: 89 48 04 mov %ecx,0x4(%rax)
8ab: e9 72 ff ff ff jmpq 822 <ir_input_init+0x22>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-09-30 8:16 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-09-16 1:00 [2.6.31] ir-kbd-i2c oops Paweł Sikora
[not found] ` <200909160300.28382.pluto-PIIpFW8S9c0@public.gmane.org>
2009-09-16 6:57 ` Jean Delvare
[not found] ` <20090916085701.6e883600-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-09-16 8:03 ` Paweł Sikora
[not found] ` <200909161003.33090.pluto-PIIpFW8S9c0@public.gmane.org>
2009-09-29 14:16 ` Jean Delvare
[not found] ` <20090929161629.2a5c8d30-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-09-29 23:26 ` Hermann Pitton
2009-09-30 8:16 ` Paweł Sikora
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).