From: Kevin Hilman <khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
To: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org>,
Jouni Hogander
<jouni.hogander-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>,
Jagadeesh Bhaskar Pakaravoor
<j-pakaravoor-l0cyMroinI0@public.gmane.org>,
Aaro Koskinen
<aaro.koskinen-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>,
Jon Hunter <jon-hunter-l0cyMroinI0@public.gmane.org>,
Hu Tao <taohu-3WKxDLwmzFNWk0Htik3J/w@public.gmane.org>,
Xiaolong Chen <A21785-3WKxDLwmzFNWk0Htik3J/w@public.gmane.org>
Subject: [PATCH] I2C: OMAP3: PM: (re)init for every transfer to support off-mode
Date: Mon, 23 Nov 2009 08:59:18 -0800 [thread overview]
Message-ID: <1258995558-18048-1-git-send-email-khilman@deeprootsystems.com> (raw)
From: Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org>
Because of OMAP off-mode, powerdomain can go off when I2C is idle.
Save enough state, and do a re-init for each transfer.
Additional save/restore state added by Jagadeesh Bhaskar Pakaravoor
(SYSC_REG) and Aaro Koskinen (wakeup sources.)
Also, The OMAP3430 TRM states:
"During active mode (I2Ci.I2C_CON[15] I2C_EN bit is set to 1), make no
changes to the I2Ci.I2C_SCLL and I2Ci.I2C_SCLH registers. Changes may
result in unpredictable behavior."
Hence, the I2C_EN bit should be clearer when modifying these
registers. Please note that clearing the entire I2C_CON register to
disable the I2C module is safe, because the I2C_CON register is
re-configured for each transfer.
Signed-off-by: Jouni Hogander <jouni.hogander-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org>
Cc: Jagadeesh Bhaskar Pakaravoor <j-pakaravoor-l0cyMroinI0@public.gmane.org>
Cc: Aaro Koskinen <aaro.koskinen-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
Cc: Jon Hunter <jon-hunter-l0cyMroinI0@public.gmane.org>
Cc: Hu Tao <taohu-3WKxDLwmzFNWk0Htik3J/w@public.gmane.org>
Cc: Xiaolong Chen <A21785-3WKxDLwmzFNWk0Htik3J/w@public.gmane.org>
Signed-off-by: Kevin Hilman <khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
---
Originally posted on 21-july-2009 for the 2.6.32 merge window:
http://marc.info/?l=linux-i2c&m=124821776627177&w=2
Please queue for 2.6.32-rc if still possible, or at least for 2.6.33.
drivers/i2c/busses/i2c-omap.c | 64 ++++++++++++++++++++++++++--------------
1 files changed, 41 insertions(+), 23 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 827da08..75bf3ad 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -178,6 +178,12 @@ struct omap_i2c_dev {
unsigned b_hw:1; /* bad h/w fixes */
unsigned idle:1;
u16 iestate; /* Saved interrupt register */
+ u16 pscstate;
+ u16 scllstate;
+ u16 sclhstate;
+ u16 bufstate;
+ u16 syscstate;
+ u16 westate;
};
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
@@ -230,9 +236,18 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
clk_enable(dev->iclk);
clk_enable(dev->fclk);
+ if (cpu_is_omap34xx()) {
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+ omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+ }
dev->idle = 0;
- if (dev->iestate)
- omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
}
static void omap_i2c_idle(struct omap_i2c_dev *dev)
@@ -258,7 +273,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
static int omap_i2c_init(struct omap_i2c_dev *dev)
{
- u16 psc = 0, scll = 0, sclh = 0;
+ u16 psc = 0, scll = 0, sclh = 0, buf = 0;
u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
unsigned long fclk_rate = 12000000;
unsigned long timeout;
@@ -287,24 +302,22 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
SYSC_AUTOIDLE_MASK);
} else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
- u32 v;
-
- v = SYSC_AUTOIDLE_MASK;
- v |= SYSC_ENAWAKEUP_MASK;
- v |= (SYSC_IDLEMODE_SMART <<
+ dev->syscstate = SYSC_AUTOIDLE_MASK;
+ dev->syscstate |= SYSC_ENAWAKEUP_MASK;
+ dev->syscstate |= (SYSC_IDLEMODE_SMART <<
__ffs(SYSC_SIDLEMODE_MASK));
- v |= (SYSC_CLOCKACTIVITY_FCLK <<
+ dev->syscstate |= (SYSC_CLOCKACTIVITY_FCLK <<
__ffs(SYSC_CLOCKACTIVITY_MASK));
- omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, v);
+ omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
+ dev->syscstate);
/*
* Enabling all wakup sources to stop I2C freezing on
* WFI instruction.
* REVISIT: Some wkup sources might not be needed.
*/
- omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
- OMAP_I2C_WE_ALL);
-
+ dev->westate = OMAP_I2C_WE_ALL;
+ omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
}
}
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
@@ -394,23 +407,28 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
- if (dev->fifo_size)
- /* Note: setup required fifo size - 1 */
- omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG,
- (dev->fifo_size - 1) << 8 | /* RTRSH */
- OMAP_I2C_BUF_RXFIF_CLR |
- (dev->fifo_size - 1) | /* XTRSH */
- OMAP_I2C_BUF_TXFIF_CLR);
+ if (dev->fifo_size) {
+ /* Note: setup required fifo size - 1. RTRSH and XTRSH */
+ buf = (dev->fifo_size - 1) << 8 | OMAP_I2C_BUF_RXFIF_CLR |
+ (dev->fifo_size - 1) | OMAP_I2C_BUF_TXFIF_CLR;
+ omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, buf);
+ }
/* Take the I2C module out of reset: */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
/* Enable interrupts */
- omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
- (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
+ dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
- (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0));
+ (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+ if (cpu_is_omap34xx()) {
+ dev->pscstate = psc;
+ dev->scllstate = scll;
+ dev->sclhstate = sclh;
+ dev->bufstate = buf;
+ }
return 0;
}
--
1.6.5.1
next reply other threads:[~2009-11-23 16:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-23 16:59 Kevin Hilman [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-07-21 23:09 [PATCH] I2C: OMAP3: PM: (re)init for every transfer to support off-mode Kevin Hilman
2009-07-29 23:43 ` Ben Dooks
[not found] ` <20090729234308.GA8850-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2009-08-03 22:11 ` Kevin Hilman
2009-09-30 22:06 ` Kevin Hilman
[not found] ` <636c5030909301506p7da5f016m5148ce6cd279e704-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-11-12 19:29 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1258995558-18048-1-git-send-email-khilman@deeprootsystems.com \
--to=khilman-1d3hcaltpluheniveurvkkeocmrvltnr@public.gmane.org \
--cc=A21785-3WKxDLwmzFNWk0Htik3J/w@public.gmane.org \
--cc=aaro.koskinen-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=j-pakaravoor-l0cyMroinI0@public.gmane.org \
--cc=jon-hunter-l0cyMroinI0@public.gmane.org \
--cc=jouni.hogander-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rnayak-l0cyMroinI0@public.gmane.org \
--cc=taohu-3WKxDLwmzFNWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).