From: Philby John <pjohn-k0rHJ+Hhz/SB+jHODAdFcQ@public.gmane.org>
To: "davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org"
<davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v3 1/2] i2c: Add SDA and SCL pin numbers to i2c platform data
Date: Tue, 12 Jan 2010 16:47:11 +0530 [thread overview]
Message-ID: <1263295031.3437.16.camel@localhost.localdomain> (raw)
>From cb3347e45449ff16a332aa164eae24ef6a2432e6 Mon Sep 17 00:00:00 2001
From: Philby John <pjohn-k0rHJ+Hhz/SB+jHODAdFcQ@public.gmane.org>
Date: Mon, 11 Jan 2010 15:53:31 +0530
Subject: [PATCH 1/2] Add SDA and SCL pin numbers to i2c platform data
Patch adds SDA and SCL pin numbers to the i2c platform data
structure for Davinci DM355 and DM6446. This at present is
used for i2c bus recovery.
TODO: Add SDA and SCL pin number information to include all
Davinci platforms such as dm355-leopard, dm365, dm646x, da8xx etc.
Signed-off-by: Philby John <pjohn-k0rHJ+Hhz/SB+jHODAdFcQ@public.gmane.org>
---
arch/arm/mach-davinci/board-dm355-evm.c | 2 ++
arch/arm/mach-davinci/board-dm644x-evm.c | 2 ++
arch/arm/mach-davinci/include/mach/i2c.h | 2 ++
3 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 077ecf4..aa48e3f 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -111,6 +111,8 @@ static struct platform_device davinci_nand_device = {
static struct davinci_i2c_platform_data i2c_pdata = {
.bus_freq = 400 /* kHz */,
.bus_delay = 0 /* usec */,
+ .sda_pin = 15,
+ .scl_pin = 14,
};
static struct snd_platform_data dm355_evm_snd_data;
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index e9612cf..976e11b 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -629,6 +629,8 @@ static struct i2c_board_info __initdata i2c_info[] = {
static struct davinci_i2c_platform_data i2c_pdata = {
.bus_freq = 20 /* kHz */,
.bus_delay = 100 /* usec */,
+ .sda_pin = 44,
+ .scl_pin = 43,
};
static void __init evm_init_i2c(void)
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index c248e9b..39fdcea 100644
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -16,6 +16,8 @@
struct davinci_i2c_platform_data {
unsigned int bus_freq; /* standard bus frequency (kHz) */
unsigned int bus_delay; /* post-transaction delay (usec) */
+ unsigned int sda_pin; /* GPIO pin ID to use for SDA */
+ unsigned int scl_pin; /* GPIO pin ID to use for SCL */
};
/* for board setup code */
--
1.6.3.3.MVISTA
next reply other threads:[~2010-01-12 11:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-12 11:17 Philby John [this message]
[not found] ` <1263295031.3437.16.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2010-01-20 8:04 ` [PATCH v3 1/2] i2c: Add SDA and SCL pin numbers to i2c platform data Philby John
[not found] ` <1263974661.3546.103.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2010-01-25 23:27 ` Kevin Hilman
2010-02-01 6:05 ` Nori, Sekhar
[not found] ` <B85A65D85D7EB246BE421B3FB0FBB59301E235A3DA-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-02-05 13:58 ` Philby John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263295031.3437.16.camel@localhost.localdomain \
--to=pjohn-k0rhj+hhz/sb+jhodadfcq@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox