From: Kevin Hilman <khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
To: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org,
Chaithrika U S <chaithrika-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 5/6] i2c: davinci: Add cpufreq support
Date: Tue, 26 Jan 2010 15:41:32 -0800 [thread overview]
Message-ID: <1264549293-25556-6-git-send-email-khilman@deeprootsystems.com> (raw)
In-Reply-To: <1264549293-25556-1-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
From: Chaithrika U S <chaithrika-l0cyMroinI0@public.gmane.org>
Add cpufreq support for DaVinci I2C driver.
Tested on DA850/OMAP-L138 EVM. For the purpose of testing, the patches
which add cpufreq support [1] for this SoC are needed.
[1]http://linux.davincidsp.com/pipermail/davinci-linux-open-source/
2009-September/016118.html
Signed-off-by: Chaithrika U S <chaithrika-l0cyMroinI0@public.gmane.org>
Acked-by: Kevin Hilman <khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
---
drivers/i2c/busses/i2c-davinci.c | 63 ++++++++++++++++++++++++++++++++++++++
1 files changed, 63 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 66b07bf..35f9daa 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -35,6 +35,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/cpufreq.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
@@ -106,6 +107,10 @@ struct davinci_i2c_dev {
int stop;
u8 terminate;
struct i2c_adapter adapter;
+#ifdef CONFIG_CPU_FREQ
+ struct completion xfr_complete;
+ struct notifier_block freq_transition;
+#endif
};
/* default platform data to use if not supplied in the platform_device */
@@ -388,6 +393,11 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
if (ret < 0)
return ret;
}
+
+#ifdef CONFIG_CPU_FREQ
+ complete(&dev->xfr_complete);
+#endif
+
return num;
}
@@ -520,6 +530,48 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
return count ? IRQ_HANDLED : IRQ_NONE;
}
+#ifdef CONFIG_CPU_FREQ
+static int i2c_davinci_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct davinci_i2c_dev *dev;
+
+ dev = container_of(nb, struct davinci_i2c_dev, freq_transition);
+ if (val == CPUFREQ_PRECHANGE) {
+ wait_for_completion(&dev->xfr_complete);
+ davinci_i2c_reset_ctrl(dev, 0);
+ } else if (val == CPUFREQ_POSTCHANGE) {
+ i2c_davinci_calc_clk_dividers(dev);
+ davinci_i2c_reset_ctrl(dev, 1);
+ }
+
+ return 0;
+}
+
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+ dev->freq_transition.notifier_call = i2c_davinci_cpufreq_transition;
+
+ return cpufreq_register_notifier(&dev->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+ cpufreq_unregister_notifier(&dev->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+#else
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+ return 0;
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+}
+#endif
+
static struct i2c_algorithm i2c_davinci_algo = {
.master_xfer = i2c_davinci_xfer,
.functionality = i2c_davinci_func,
@@ -559,6 +611,9 @@ static int davinci_i2c_probe(struct platform_device *pdev)
}
init_completion(&dev->cmd_complete);
+#ifdef CONFIG_CPU_FREQ
+ init_completion(&dev->xfr_complete);
+#endif
dev->dev = get_device(&pdev->dev);
dev->irq = irq->start;
platform_set_drvdata(pdev, dev);
@@ -584,6 +639,12 @@ static int davinci_i2c_probe(struct platform_device *pdev)
goto err_unuse_clocks;
}
+ r = i2c_davinci_cpufreq_register(dev);
+ if (r) {
+ dev_err(&pdev->dev, "failed to register cpufreq\n");
+ goto err_free_irq;
+ }
+
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
@@ -625,6 +686,8 @@ static int davinci_i2c_remove(struct platform_device *pdev)
struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
struct resource *mem;
+ i2c_davinci_cpufreq_deregister(dev);
+
platform_set_drvdata(pdev, NULL);
i2c_del_adapter(&dev->adapter);
put_device(&pdev->dev);
--
1.6.6
next prev parent reply other threads:[~2010-01-26 23:41 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-26 23:41 [PATCH 0/6] davinci i2c updates for 2.6.34 Kevin Hilman
[not found] ` <1264549293-25556-1-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-01-26 23:41 ` [PATCH 1/6] i2c: davinci: Fix smbus Oops with AIC33 usage Kevin Hilman
[not found] ` <026601ca9f54$17a18110$46e48330$@raj@ti.com>
[not found] ` <026601ca9f54$17a18110$46e48330$@raj-l0cyMroinI0@public.gmane.org>
2010-01-27 14:50 ` Kevin Hilman
[not found] ` <87k4v3y53z.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-01-28 4:05 ` Sudhakar Rajashekhara
2010-01-28 8:46 ` Sudhakar Rajashekhara
[not found] ` <02ee01ca9ff6$53cf0d90$fb6d28b0$@raj@ti.com>
[not found] ` <02ee01ca9ff6$53cf0d90$fb6d28b0$@raj-l0cyMroinI0@public.gmane.org>
2010-01-28 14:45 ` Kevin Hilman
[not found] ` <1264549293-25556-2-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-01-27 13:24 ` Sudhakar Rajashekhara
2010-01-27 15:03 ` Ben Dooks
2010-01-26 23:41 ` [PATCH 2/6] i2c: davinci: Remove MOD_REG_BIT and IO_ADDRESS usage Kevin Hilman
[not found] ` <1264549293-25556-3-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-01-27 15:05 ` Ben Dooks
[not found] ` <20100127150518.GB6090-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2010-01-29 19:46 ` Kevin Hilman
2010-01-26 23:41 ` [PATCH 3/6] i2c: davinci: Add helper functions Kevin Hilman
2010-01-26 23:41 ` [PATCH 4/6] i2c: davinci: Add suspend/resume support Kevin Hilman
2010-01-26 23:41 ` Kevin Hilman [this message]
2010-01-26 23:41 ` [PATCH 6/6] i2c: davinci: bus recovery procedure to clear the bus Kevin Hilman
[not found] ` <1264549293-25556-7-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-02-01 5:57 ` Nori, Sekhar
[not found] ` <B85A65D85D7EB246BE421B3FB0FBB59301E235A3C2-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-02-01 19:40 ` Kevin Hilman
2010-02-05 13:53 ` Philby John
[not found] ` <225d086e1002050553tc1a696avce827cc115f56b1c-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-02-08 10:35 ` Nori, Sekhar
[not found] ` <B85A65D85D7EB246BE421B3FB0FBB59301E2639AD8-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-02-08 10:50 ` Philby John
2010-02-08 15:13 ` Philby John
[not found] ` <4B702A17.3070104-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2010-02-08 16:03 ` Nori, Sekhar
[not found] ` <B85A65D85D7EB246BE421B3FB0FBB59301E2639D67-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-02-09 10:15 ` Philby John
[not found] ` <4B7135B3.9080104-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2010-02-09 10:52 ` Nori, Sekhar
[not found] ` <B85A65D85D7EB246BE421B3FB0FBB59301E263A447-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-03-05 15:20 ` Griffis, Brad
[not found] ` <F8C55F6A02E92D48BDDFC6048552C6F14E6D9F3F-lTKHBJngVwKIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-03-08 13:37 ` Philby John
[not found] ` <4B94FD84.3060100-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2010-03-11 16:28 ` Griffis, Brad
2010-03-08 13:36 ` Philby John
[not found] ` <4B94FD6F.7050603-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2010-03-16 20:50 ` Kevin Hilman
[not found] ` <87d3z4xa7m.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-03-17 11:28 ` Philby John
[not found] ` <4BA0BCEC.8040209-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2010-03-17 13:18 ` Nori, Sekhar
[not found] ` <B85A65D85D7EB246BE421B3FB0FBB59301E6328944-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-03-17 13:46 ` Philby John
2010-09-13 14:23 ` Pablo Bitton
[not found] ` <AANLkTimqT=xgoxycjFAwEr6LPTeK21-FB1F-7kP5baPE-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-09-27 12:40 ` Philby John
-- strict thread matches above, loose matches on Subject: below --
2010-04-06 17:42 [PATCH 0/6] i2c: davinci updates for 2.6.35 Kevin Hilman
2010-04-06 17:42 ` [PATCH 5/6] i2c: davinci: Add cpufreq support Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1264549293-25556-6-git-send-email-khilman@deeprootsystems.com \
--to=khilman-1d3hcaltpluheniveurvkkeocmrvltnr@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=chaithrika-l0cyMroinI0@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).