From mboxrd@z Thu Jan 1 00:00:00 1970 From: Luotao Fu Subject: [PATCH] i2c-pnx: fix setting start/stop condition Date: Mon, 1 Mar 2010 13:24:24 +0100 Message-ID: <1267446264-8446-1-git-send-email-l.fu@pengutronix.de> Return-path: Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Vitaly Wool Cc: Jean Delvare , Ben Dooks , Kevin Wells , Julia Lawall , Russell King , linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Luotao Fu List-Id: linux-i2c@vger.kernel.org The start/stop condtions are set in different places repetedly in the i2c-pnx driver. Beside in i2c_pnx_start and i2c_pnx_stop the start/stop bit are also set during the transfer of a i2c message in the master_xmit/rcv calls. This is wrong since we can't set the start/stop condition during the transaction of a single message any way. As a matter of fact, the driver will sometimes set both the start and the stop bits at one time. This can be easily reproduced by sending a simple read request like e.g struct i2c_msg msgs[] = { { addr, 0, 1, buf }, { addr, I2C_M_RD, offset, buf } }; While processing the first message the i2c_pnx_master_xmit will set both the start_bit and the stop_bit, which will eventually confuse the slave. Fixed by remove setting start/stop condition from the transmit routines. Signed-off-by: Luotao Fu --- drivers/i2c/busses/i2c-pnx.c | 11 ----------- 1 files changed, 0 insertions(+), 11 deletions(-) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 5d1c260..92c0e46 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -175,12 +175,6 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap) /* We still have something to talk about... */ val = *alg_data->mif.buf++; - if (alg_data->mif.len == 1) { - val |= stop_bit; - if (!alg_data->last) - val |= start_bit; - } - alg_data->mif.len--; iowrite32(val, I2C_REG_TX(alg_data)); @@ -252,11 +246,6 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap) "Rx-fifo...\n", __func__); if (alg_data->mif.len == 1) { - /* Last byte, do not acknowledge next rcv. */ - val |= stop_bit; - if (!alg_data->last) - val |= start_bit; - /* * Enable interrupt RFDAIE (data in Rx fifo), * and disable DRMIE (need data for Tx) -- 1.7.0