From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfram Sang Subject: [PATCH V2] i2c/busses: move two drivers to embedded section Date: Tue, 1 Jun 2010 10:26:59 +0200 Message-ID: <1275380819-26709-1-git-send-email-w.sang@pengutronix.de> References: <20100601091855.42fbc9b3@hyperion.delvare> Return-path: In-Reply-To: <20100601091855.42fbc9b3-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Wolfram Sang , Jean Delvare List-Id: linux-i2c@vger.kernel.org And fix a typo while we are here Signed-off-by: Wolfram Sang Cc: Jean Delvare --- changes since v1: also move the drivers in Kconfig drivers/i2c/busses/Kconfig | 40 ++++++++++++++++++++-------------------- drivers/i2c/busses/Makefile | 6 +++--- 2 files changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 87ab056..bceafbf 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -475,6 +475,26 @@ config I2C_PASEMI help Supports the PA Semi PWRficient on-chip SMBus interfaces. +config I2C_PCA_PLATFORM + tristate "PCA9564/PCA9665 as platform device" + select I2C_ALGOPCA + default n + help + This driver supports a memory mapped Philips PCA9564/PCA9665 + parallel bus to I2C bus controller. + + This driver can also be built as a module. If so, the module + will be called i2c-pca-platform. + +config I2C_PMCMSP + tristate "PMC MSP I2C TWI Controller" + depends on PMC_MSP + help + This driver supports the PMC TWI controller on MSP devices. + + This driver can also be built as module. If so, the module + will be called i2c-pmcmsp. + config I2C_PNX tristate "I2C bus support for Philips PNX targets" depends on ARCH_PNX4008 @@ -711,26 +731,6 @@ config I2C_PCA_ISA delays when I2C/SMBus chip drivers are loaded (e.g. at boot time). If unsure, say N. -config I2C_PCA_PLATFORM - tristate "PCA9564/PCA9665 as platform device" - select I2C_ALGOPCA - default n - help - This driver supports a memory mapped Philips PCA9564/PCA9665 - parallel bus to I2C bus controller. - - This driver can also be built as a module. If so, the module - will be called i2c-pca-platform. - -config I2C_PMCMSP - tristate "PMC MSP I2C TWI Controller" - depends on PMC_MSP - help - This driver supports the PMC TWI controller on MSP devices. - - This driver can also be built as module. If so, the module - will be called i2c-pmcmsp. - config I2C_SIBYTE tristate "SiByte SMBus interface" depends on SIBYTE_SB1xxx_SOC diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 097236f..936880b 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o -# Embebbed system I2C/SMBus host controller drivers +# Embedded system I2C/SMBus host controller drivers obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o @@ -46,6 +46,8 @@ obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o +obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o +obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o @@ -68,8 +70,6 @@ obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o -obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o -obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o obj-$(CONFIG_I2C_STUB) += i2c-stub.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o -- 1.7.0