linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@ti.com>
To: Ben Dooks <ben-linux@fluff.org>, linux-i2c@vger.kernel.org
Cc: Andy Green <andy.green@linaro.org>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 17/18] I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from platform data
Date: Wed,  1 Jun 2011 17:19:43 -0700	[thread overview]
Message-ID: <1306973984-15165-18-git-send-email-khilman@ti.com> (raw)
In-Reply-To: <1306973984-15165-1-git-send-email-khilman@ti.com>

From: Andy Green <andy@warmcat.com>

This patch eliminates all cpu_...() tests from the OMAP I2C driver.

Instead, it uses the functionality flags in the platform data to make
the decisions about product variations the driver needs to handle.

Cc: patches@linaro.org
Cc: Ben Dooks <ben-linux@fluff.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   40 +++++++++++++++++++++++-----------------
 1 files changed, 23 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ecb48c7..c997c55 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -277,7 +277,7 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 
 	pm_runtime_get_sync(&pdev->dev);
 
-	if (cpu_is_omap34xx()) {
+	if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
 		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 		omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
 		omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
@@ -335,6 +335,11 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 	unsigned long timeout;
 	unsigned long internal_clk = 0;
 	struct clk *fclk;
+	struct platform_device *pdev;
+	struct omap_i2c_bus_platform_data *pdata;
+
+	pdev = to_platform_device(dev->dev);
+	pdata = pdev->dev.platform_data;
 
 	if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
 		/* Disable I2C controller before soft reset */
@@ -386,7 +391,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 	}
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 
-	if (cpu_class_is_omap1()) {
+	if (pdata->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
 		/*
 		 * The I2C functional clock is the armxor_ck, so there's
 		 * no need to get "armxor_ck" separately.  Now, if OMAP2420
@@ -410,7 +415,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			psc = fclk_rate / 12000000;
 	}
 
-	if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
+	if (!(pdata->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
 
 		/*
 		 * HSI2C controller internal clk rate should be 19.2 Mhz for
@@ -418,7 +423,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 		 * to get longer filter period for better noise suppression.
 		 * The filter is iclk (fclk for HS) period.
 		 */
-		if (dev->speed > 400 || cpu_is_omap2430())
+		if (dev->speed > 400 ||
+			       pdata->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
 			internal_clk = 19200;
 		else if (dev->speed > 100)
 			internal_clk = 9600;
@@ -487,7 +493,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 
 	dev->errata = 0;
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (pdata->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
 		dev->errata |= I2C_OMAP_ERRATA_I207;
 
 	/* Enable interrupts */
@@ -496,7 +502,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			OMAP_I2C_IE_AL)  | ((dev->fifo_size) ?
 				(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
 	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
-	if (cpu_is_omap34xx()) {
+	if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
 		dev->pscstate = psc;
 		dev->scllstate = scll;
 		dev->sclhstate = sclh;
@@ -816,6 +822,11 @@ omap_i2c_isr(int this_irq, void *dev_id)
 	u16 bits;
 	u16 stat, w;
 	int err, count = 0;
+	struct platform_device *pdev;
+	struct omap_i2c_bus_platform_data *pdata;
+
+	pdev = to_platform_device(dev->dev);
+	pdata = pdev->dev.platform_data;
 
 	if (dev->idle)
 		return IRQ_NONE;
@@ -884,8 +895,8 @@ complete:
 					 * Data reg in 2430, omap3 and
 					 * omap4 is 8 bit wide
 					 */
-					if (cpu_class_is_omap1() ||
-							cpu_is_omap2420()) {
+					if (pdata->flags &
+						 OMAP_I2C_FLAG_16BIT_DATA_REG) {
 						if (dev->buf_len) {
 							*dev->buf++ = w >> 8;
 							dev->buf_len--;
@@ -927,8 +938,8 @@ complete:
 					 * Data reg in 2430, omap3 and
 					 * omap4 is 8 bit wide
 					 */
-					if (cpu_class_is_omap1() ||
-							cpu_is_omap2420()) {
+					if (pdata->flags &
+						 OMAP_I2C_FLAG_16BIT_DATA_REG) {
 						if (dev->buf_len) {
 							w |= *dev->buf++ << 8;
 							dev->buf_len--;
@@ -1030,12 +1041,7 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dev);
 
-	if (cpu_is_omap7xx())
-		dev->reg_shift = 1;
-	else if (cpu_is_omap44xx())
-		dev->reg_shift = 0;
-	else
-		dev->reg_shift = 2;
+	dev->reg_shift = (pdata->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
 
 	if (pdata->rev == OMAP_I2C_IP_VERSION_2)
 		dev->regs = (u8 *)reg_map_ip_v2;
@@ -1050,7 +1056,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	if (dev->rev <= OMAP_I2C_REV_ON_3430)
 		dev->errata |= I2C_OMAP3_1P153;
 
-	if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
+	if (!(pdata->flags & OMAP_I2C_FLAG_NO_FIFO)) {
 		u16 s;
 
 		/* Set up the fifo size - Get total size */
-- 
1.7.4


  parent reply	other threads:[~2011-06-02  0:19 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-02  0:19 [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver Kevin Hilman
2011-06-02  0:19 ` [PATCH v4 02/18] I2C: OMAP2+: Name registers in I2C IP V2 only accordingly Kevin Hilman
2011-06-02  0:19 ` [PATCH v4 04/18] I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision Kevin Hilman
2011-06-02  0:19 ` [PATCH v4 09/18] I2C: OMAP2+: Solve array bounds overflow error on i2c idle Kevin Hilman
2011-06-02  0:19 ` [PATCH v4 10/18] I2C: OMAP2+: address confused probed version naming Kevin Hilman
2011-06-02  0:19 ` [PATCH v4 11/18] I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32 Kevin Hilman
2011-06-02  0:19 ` [PATCH v4 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test Kevin Hilman
2011-06-02  0:19 ` [PATCH v4 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr Kevin Hilman
2011-06-02  0:19 ` [PATCH v4 16/18] I2C: OMAP1: set i2c unit feature implementation flags in platform data Kevin Hilman
2011-06-02  0:19 ` Kevin Hilman [this message]
2011-06-02  0:19 ` [PATCH v4 18/18] I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_info Kevin Hilman
     [not found] ` <1306973984-15165-1-git-send-email-khilman-l0cyMroinI0@public.gmane.org>
2011-06-02  0:19   ` [PATCH v4 01/18] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c Kevin Hilman
2011-06-02  0:19   ` [PATCH v4 03/18] I2C: OMAP2+: Introduce I2C IP versioning constants Kevin Hilman
2011-06-02  0:19   ` [PATCH v4 05/18] I2C: OMAP: add rev to omap i2c platform data Kevin Hilman
2011-06-02  0:19   ` [PATCH v4 06/18] I2C: OMAP1: set IP revision in " Kevin Hilman
2011-06-02  0:19   ` [PATCH v4 07/18] I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus added Kevin Hilman
2011-06-02  0:19   ` [PATCH v4 08/18] I2C: OMAP2+: use platform_data ip revision to select register map Kevin Hilman
2011-06-02  0:19   ` [PATCH v4 12/18] I2C: OMAP1/OMAP2+: add flags field to omap i2c platform data Kevin Hilman
2011-06-02  0:19   ` [PATCH v4 13/18] I2C: OMAP2+: Pass flags up to omap i2c platform_data as well Kevin Hilman
2011-06-07 13:41   ` [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver Ben Dooks
2011-06-15 21:36   ` Ben Dooks
     [not found]     ` <20110615213637.GH15795-SMNkleLxa3Z6Wcw2j4pizdi2O/JbrIOy@public.gmane.org>
2011-06-15 23:27       ` Nicolas Pitre
2011-06-15 23:33       ` Kevin Hilman
2011-06-27 22:12         ` Kevin Hilman
2011-06-27 22:15           ` Kevin Hilman
2011-07-05 19:00             ` Kevin Hilman
2011-07-07 23:01               ` Ben Dooks
2011-07-08 15:14                 ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1306973984-15165-18-git-send-email-khilman@ti.com \
    --to=khilman@ti.com \
    --cc=andy.green@linaro.org \
    --cc=ben-linux@fluff.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).