From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
John Bonesio <bones-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
Mike Rapoport <mike-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>,
Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH REPOST 3/3] i2c: tegra: fix possible race condition after tx
Date: Tue, 30 Aug 2011 11:46:10 -0600 [thread overview]
Message-ID: <1314726370-8193-4-git-send-email-swarren@nvidia.com> (raw)
In-Reply-To: <1314726370-8193-1-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
From: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
In tegra_i2c_fill_tx_fifo, once we have finished pushing all the bytes
to the I2C hardware controller, the interrupt might happen before we
have updated i2c_dev->msg_buf_remaining at the end of the function.
Then, in tegra_i2c_isr, we will call again tegra_i2c_fill_tx_fifo
triggering weird behaviour. This has been shown to happen under real
conditions.
Signed-off-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Tested-by: Vincent Palatin <vpalatin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Acked-by: Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Acked-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
drivers/i2c/busses/i2c-tegra.c | 46 +++++++++++++++++++++++++++------------
1 files changed, 32 insertions(+), 14 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 8848a4b..b402435 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -271,14 +271,30 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
/* Rounds down to not include partial word at the end of buf */
words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
- if (words_to_transfer > tx_fifo_avail)
- words_to_transfer = tx_fifo_avail;
- i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
-
- buf += words_to_transfer * BYTES_PER_FIFO_WORD;
- buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
- tx_fifo_avail -= words_to_transfer;
+ /* It's very common to have < 4 bytes, so optimize that case. */
+ if (words_to_transfer) {
+ if (words_to_transfer > tx_fifo_avail)
+ words_to_transfer = tx_fifo_avail;
+
+ /*
+ * Update state before writing to FIFO. If this casues us
+ * to finish writing all bytes (AKA buf_remaining goes to 0) we
+ * have a potential for an interrupt (PACKET_XFER_COMPLETE is
+ * not maskable). We need to make sure that the isr sees
+ * buf_remaining as 0 and doesn't call us back re-entrantly.
+ */
+ buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
+ tx_fifo_avail -= words_to_transfer;
+ i2c_dev->msg_buf_remaining = buf_remaining;
+ i2c_dev->msg_buf = buf +
+ words_to_transfer * BYTES_PER_FIFO_WORD;
+ barrier();
+
+ i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+
+ buf += words_to_transfer * BYTES_PER_FIFO_WORD;
+ }
/*
* If there is a partial word at the end of buf, handle it manually to
@@ -288,14 +304,15 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
if (tx_fifo_avail > 0 && buf_remaining > 0) {
BUG_ON(buf_remaining > 3);
memcpy(&val, buf, buf_remaining);
+
+ /* Again update before writing to FIFO to make sure isr sees. */
+ i2c_dev->msg_buf_remaining = 0;
+ i2c_dev->msg_buf = NULL;
+ barrier();
+
i2c_writel(i2c_dev, val, I2C_TX_FIFO);
- buf_remaining = 0;
- tx_fifo_avail--;
}
- BUG_ON(tx_fifo_avail > 0 && buf_remaining > 0);
- i2c_dev->msg_buf_remaining = buf_remaining;
- i2c_dev->msg_buf = buf;
return 0;
}
@@ -412,9 +429,10 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
}
- if ((status & I2C_INT_PACKET_XFER_COMPLETE) &&
- !i2c_dev->msg_buf_remaining)
+ if (status & I2C_INT_PACKET_XFER_COMPLETE) {
+ BUG_ON(i2c_dev->msg_buf_remaining);
complete(&i2c_dev->msg_complete);
+ }
i2c_writel(i2c_dev, status, I2C_INT_STATUS);
if (i2c_dev->is_dvc)
--
1.7.0.4
next prev parent reply other threads:[~2011-08-30 17:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-30 17:46 [PATCH REPOST 0/3] i2c: tegra: Outstanding patches Stephen Warren
[not found] ` <1314726370-8193-1-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-08-30 17:46 ` [PATCH REPOST 1/3] i2c: Tegra: Add of_match_table Stephen Warren
2011-08-30 17:46 ` [PATCH REPOST 2/3] i2c: i2c-tegra: add I2C_FUNC_SMBUS_EMUL Stephen Warren
2011-08-30 17:46 ` Stephen Warren [this message]
2011-09-06 23:15 ` [PATCH REPOST 0/3] i2c: tegra: Outstanding patches Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314726370-8193-4-git-send-email-swarren@nvidia.com \
--to=swarren-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=bones-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mike-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).