[PATCH 3/7] i2c-eg20t: delete 10bit access processing

[Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>]

Linux I2C core doesn't support 10bit access formally.
Additionally, we can't test with 10bit mode.
This patch deletes the 10bit access processing.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
 drivers/i2c/busses/i2c-eg20t.c |   27 +++++++--------------------
 1 files changed, 7 insertions(+), 20 deletions(-)

diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 21ade63..a87a878 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -389,8 +389,6 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
 	u8 *buf;
 	u32 length;
 	u32 addr;
-	u32 addr_2_msb;
-	u32 addr_8_lsb;
 	s32 wrcount;
 	void __iomem *p = adap->pch_base_address;
 
@@ -410,25 +408,16 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
 	}
 
 	if (msgs->flags & I2C_M_TEN) {
-		addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7);
-		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
-		if (first)
-			pch_i2c_start(adap);
-		if (pch_i2c_wait_for_xfer_complete(adap) == 0 &&
-		    pch_i2c_getack(adap) == 0) {
-			addr_8_lsb = (addr & I2C_ADDR_MSK);
-			iowrite32(addr_8_lsb, p + PCH_I2CDR);
-		} else {
-			pch_i2c_stop(adap);
-			return -ETIME;
-		}
+		pch_err(adap, "10Bit access is not supported\n");
+		return -EINVAL;
 	} else {
 		/* set 7 bit slave address and R/W bit as 0 */
 		iowrite32(addr << 1, p + PCH_I2CDR);
-		if (first)
-			pch_i2c_start(adap);
 	}
 
+	if (first)
+		pch_i2c_start(adap);
+
 	if ((pch_i2c_wait_for_xfer_complete(adap) == 0) &&
 	    (pch_i2c_getack(adap) == 0)) {
 		for (wrcount = 0; wrcount < length; ++wrcount) {
@@ -497,7 +486,6 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 	u32 count;
 	u32 length;
 	u32 addr;
-	u32 addr_2_msb;
 	void __iomem *p = adap->pch_base_address;
 
 	length = msgs->len;
@@ -513,9 +501,8 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 	}
 
 	if (msgs->flags & I2C_M_TEN) {
-		addr_2_msb = (((addr & I2C_MSB_2B_MSK) >> 7) | (I2C_RD));
-		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
-
+		pch_err(adap, "10Bit access is not supported\n");
+		return -EINVAL;
 	} else {
 		/* 7 address bits + R/W bit */
 		addr = (((addr) << 1) | (I2C_RD));
-- 
1.7.4.4