From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Subject: [PATCH] i2c: mxs: Let i2c-mxs be built for MX23 Date: Fri, 21 Oct 2011 16:06:19 -0200 Message-ID: <1319220379-2960-1-git-send-email-fabio.estevam@freescale.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org, ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org, Fabio Estevam List-Id: linux-i2c@vger.kernel.org MX23 and MX28 share the same I2C block, so let i2c-mxs be built for MX23 too. Signed-off-by: Fabio Estevam --- drivers/i2c/busses/Kconfig | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 646068e..08748db 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -456,11 +456,11 @@ config I2C_MV64XXX will be called i2c-mv64xxx. config I2C_MXS - tristate "Freescale i.MX28 I2C interface" - depends on SOC_IMX28 + tristate "Freescale i.MXS I2C interface" + depends on (SOC_IMX28 || SOC_IMX23) help Say Y here if you want to use the I2C bus controller on - the Freescale i.MX28 processors. + the Freescale i.MXS processors. This driver can also be built as a module. If so, the module will be called i2c-mxs. -- 1.7.1