[PATCH v4 06/12] arm/dts: OMAP3: Add i2c controller nodes

[Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>]

Add i2c controllers nodes into the main ocp bus.

Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/boot/dts/omap3.dtsi |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 6866dc7..697b210 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -61,5 +61,26 @@
 			ti,intc-size = <96>;
 			reg = <0x48200000 0x1000>;
 		};
+
+		i2c1: i2c@1 {
+			compatible = "ti,omap3-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@2 {
+			compatible = "ti,omap3-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@3 {
+			compatible = "ti,omap3-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
 	};
 };
-- 
1.7.0.4