Linux I2C development
 help / color / mirror / Atom feed
From: "Jayachandran C." <jayachandranc-oSioyQM9ZPnuBjGU1YDckgC/G2K4zDHf@public.gmane.org>
To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org,
	w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	Tomoya MORINAGA
	<tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
Cc: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
	Jayachandran C
	<jayachandranc-oSioyQM9ZPnuBjGU1YDckgC/G2K4zDHf@public.gmane.org>
Subject: [PATCH] i2c: Move I2C_EG20T option to the right place.
Date: Mon, 23 Jan 2012 18:01:29 +0530	[thread overview]
Message-ID: <1327321889-6393-1-git-send-email-jayachandranc@netlogicmicro.com> (raw)

From: Jayachandran C <jayachandranc-oSioyQM9ZPnuBjGU1YDckgC/G2K4zDHf@public.gmane.org>

Move Kconfig option for I2C_EG20T to the correct position and keep
the options sorted.

Also, use tabs in Makefile and move the I2C_EG20T entry to its
position.

Signed-off-by: Jayachandran C <jayachandranc-oSioyQM9ZPnuBjGU1YDckgC/G2K4zDHf@public.gmane.org>
---
 drivers/i2c/busses/Kconfig  |   30 +++++++++++++++---------------
 drivers/i2c/busses/Makefile |    2 +-
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 7726c79..e99bfa8 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -369,6 +369,21 @@ config I2C_DESIGNWARE_PCI
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-designware-pci.
 
+config I2C_EG20T
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
+	depends on PCI
+	help
+	  This driver is for PCH(Platform controller Hub) I2C of EG20T which
+	  is an IOH(Input/Output Hub) for x86 embedded processor.
+	  This driver can access PCH I2C bus device.
+
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7213, ML7223 and ML7831.
+	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+
 config I2C_GPIO
 	tristate "GPIO-based bitbanging I2C"
 	depends on GENERIC_GPIO
@@ -691,21 +706,6 @@ config I2C_XLR
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-xlr.
 
-config I2C_EG20T
-	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
-	depends on PCI
-	help
-	  This driver is for PCH(Platform controller Hub) I2C of EG20T which
-	  is an IOH(Input/Output Hub) for x86 embedded processor.
-	  This driver can access PCH I2C bus device.
-
-	  This driver also can be used for LAPIS Semiconductor IOH(Input/
-	  Output Hub), ML7213, ML7223 and ML7831.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
-	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
-	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
-
 comment "External I2C/SMBus adapter drivers"
 
 config I2C_DIOLAN_U2C
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index a0c644d..8f9e7b6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
 i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
 i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
+obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
@@ -69,7 +70,6 @@ obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
 obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
 obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
 obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
-obj-$(CONFIG_I2C_EG20T)         += i2c-eg20t.o
 
 # External I2C/SMBus adapter drivers
 obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
-- 
1.7.5.4

             reply	other threads:[~2012-01-23 12:31 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-23 12:31 Jayachandran C. [this message]
     [not found] ` <1327321889-6393-1-git-send-email-jayachandranc-oSioyQM9ZPnuBjGU1YDckgC/G2K4zDHf@public.gmane.org>
2012-01-25 15:39   ` [PATCH] i2c: Move I2C_EG20T option to the right place Wolfram Sang
     [not found]     ` <20120125153842.GC8852-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-01-25 15:50       ` Jayachandran C

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1327321889-6393-1-git-send-email-jayachandranc@netlogicmicro.com \
    --to=jayachandranc-osioyqm9zpnubjgu1ydckgc/g2k4zdhf@public.gmane.org \
    --cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
    --cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org \
    --cc=w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox