[PATCHv7 05/18] I2C: OMAP: Fix the interrupt clearing in OMAP4

Shubhrajyoti D
2012-04-11T11:12:43Z

On OMAP4 we were writing 1 to IRQENABLE_CLR which cleared only
the arbitration lost interrupt. The patch intends to fix the same by writing 0
to the IE register clearing all interrupts.

This is based on the work done by Vikram Pandita <vikram.pandita@ti.com>.

The changes from the original patch ...
- Does not use the IRQENABLE_CLR register to clear as it is not mentioned
to be legacy register IRQENABLE_CLR helps in atomically
setting/clearing specific interrupts, instead use the OMAP_I2C_IE_REG as we are
clearing all interrupts.

Cc: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
drivers/i2c/busses/i2c-omap.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 45389db..2769f67 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1179,10 +1179,8 @@ static int omap_i2c_runtime_suspend(struct device *dev)
_dev->dev_lost_count = _dev->get_context_loss_count(dev);

_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
- if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
- omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
- else
- omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+
+ omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);

if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
--
1.7.4.1