From: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
Subject: [PATCHv8 00/18] I2C Updates
Date: Thu, 12 Apr 2012 18:36:17 +0530 [thread overview]
Message-ID: <1334235995-6727-1-git-send-email-shubhrajyoti@ti.com> (raw)
The patch series does the following
- Warn fixes if CONFIG_PM_RUNTIME is not selected.
- I2C register restore only if context if the context is lost
- Bus busy recovery mechanism.
- the reset is not done in init.
- Adds a patch to use devm_* functions
- Also checks the return type of the get_sync and in case
of errors prevents register access, also print the cause of
failure in case of errors.
- In case of i2c remove register access was done without any
get_sync fix the same.
- Adds a pdata function pointer to do context save restore
- Split the omap_i2c_isr to increase readability
- Make the i2c use SET_RUNTIME_PM_OPS
- Folds a patch from Tasslehoff to prevent any merge conflicts.
- Prevents the XDUF flag to be set if the underflow condition is not met.
- As per discussion in [1] .Adds a patch to rename the 1p153 errata and
use the unique id instead as the section number in the recent errata
docs has changed.
- As discussed in [2], Paul has queued the flag for context restore patch,
removing it from the series.
v8
Fix Felipe's comments and use devm_request_and_ioremap.
[1] http://www.spinics.net/lists/linux-i2c/msg07607.html
[2] http://www.spinics.net/lists/linux-i2c/msg07685.html
Tested on omap4sdp and omap3sdp.
The following changes since commit 258f742635360175564e9470eb060ff4d4b984e7:
modpost: Fix modpost license checking of vmlinux.o (2012-04-09 20:52:56 -0700)
are available in the git repository at:
git://gitorious.org/linus-tree/linus-tree.git i2c_omap-next
Jon Hunter (1):
I2C: OMAP: Correct I2C revision for OMAP3
Shubhrajyoti D (15):
I2C: OMAP: make omap_i2c_unidle/idle functions depend on
CONFIG_PM_RUNTIME
I2C: OMAP: Remove reset at init
I2C: OMAP: I2C register restore only if context is lost
I2C: OMAP: Fix the interrupt clearing in OMAP4
I2C: OMAP: Fix the mismatch of pm_runtime enable and disable
I2C: OMAP: Optimise the remove code
I2C: OMAP: Fix the error handling
I2C: OMAP: Don't check if wait_for_completion_timeout() returns less
than zero
I2C: OMAP: use devm_* functions
I2C: OMAP: Fix the crash in i2c remove
I2C: OMAP: Handle error check for pm runtime
I2C: OMAP: Use SET_RUNTIME_PM_OPS
I2C: OMAP: make the read ready processing a separate function
I2C: OMAP: Do not set the XUDF if the underflow is not reached
I2C: OMAP: Rename the 1p153 to the erratum id i462
Tasslehoff Kjappfot (1):
I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153
Vikram Pandita (1):
I2C: OMAP: Recover from Bus Busy condition
arch/arm/plat-omap/i2c.c | 3 +
drivers/i2c/busses/i2c-omap.c | 350 +++++++++++++++++++++++------------------
include/linux/i2c-omap.h | 1 +
3 files changed, 199 insertions(+), 155 deletions(-)
--
1.7.4.1
next reply other threads:[~2012-04-12 13:06 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-12 13:06 Shubhrajyoti D [this message]
2012-04-12 13:06 ` [PATCHv8 02/18] I2C: OMAP: Remove reset at init Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 05/18] I2C: OMAP: Fix the interrupt clearing in OMAP4 Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 06/18] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 07/18] I2C: OMAP: Optimise the remove code Shubhrajyoti D
[not found] ` <1334235995-6727-1-git-send-email-shubhrajyoti-l0cyMroinI0@public.gmane.org>
2012-04-12 13:06 ` [PATCHv8 01/18] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 03/18] I2C: OMAP: Recover from Bus Busy condition Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 04/18] I2C: OMAP: I2C register restore only if context is lost Shubhrajyoti D
2012-04-16 18:13 ` Tony Lindgren
2012-04-17 5:50 ` Shubhrajyoti
[not found] ` <1334235995-6727-5-git-send-email-shubhrajyoti-l0cyMroinI0@public.gmane.org>
2012-04-17 13:45 ` Kevin Hilman
[not found] ` <87d376zd2v.fsf-l0cyMroinI0@public.gmane.org>
2012-04-17 15:08 ` Shubhrajyoti Datta
2012-04-18 7:19 ` Datta, Shubhrajyoti
2012-04-18 14:08 ` Kevin Hilman
[not found] ` <CANQgH-af1VCutKqpq8jK1yTPHybgvnUNA3zdfQq4AYcWcJRtvA@mail.gmail.com>
[not found] ` <CANQgH-af1VCutKqpq8jK1yTPHybgvnUNA3zdfQq4AYcWcJRtvA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2012-04-20 14:17 ` Datta, Shubhrajyoti
2012-04-12 13:06 ` [PATCHv8 08/18] I2C: OMAP: Fix the error handling Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 09/18] I2C: OMAP: Correct I2C revision for OMAP3 Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 10/18] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 12/18] I2C: OMAP: Fix the crash in i2c remove Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 13/18] I2C: OMAP: Handle error check for pm runtime Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 15/18] I2C: OMAP: make the read ready processing a separate function Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 17/18] I2C: OMAP: Do not set the XUDF if the underflow is not reached Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 18/18] I2C: OMAP: Rename the 1p153 to the erratum id i462 Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 11/18] I2C: OMAP: use devm_* functions Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 14/18] I2C: OMAP: Use SET_RUNTIME_PM_OPS Shubhrajyoti D
2012-04-12 13:06 ` [PATCHv8 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153 Shubhrajyoti D
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334235995-6727-1-git-send-email-shubhrajyoti@ti.com \
--to=shubhrajyoti-l0cymroini0@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
--cc=w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox