[PATCH 00/11] enable imx6q_sabrelite sgtl5000 audio support

[PATCH 00/11] enable imx6q_sabrelite sgtl5000 audio support

[Richard Zhao]

It's based on Dong Aisheng's early pinctrl patch and Sascha's v2
convert to common clk patch.

You can also get at:
https://github.com/riczhao/kernel-imx/tree/topics/audio

Richard Zhao (11):
  dma: imx-sdma: make channel0 operations atomic
  ASoC: imx-sgtl5000: add of_node_put when probe fail.
  ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000
  i2c: imx: add pinctrl support
  ARM: imx6q: move imx6q_sabrelite specific code to a dedicated
    function
  ARM: dts: imx6q-sabrelite: add ssi device
  ARM: dts: imx6q-sabrelite: add audmux device
  ASoC: imx-audmux: add pinctrl support
  ARM: imx6q: add ssi1 clk_lookup
  ARM: imx6q_sabrelite: clkdev_add cko1 for sgtl5000
  ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

 arch/arm/boot/dts/imx6q-sabrelite.dts |   30 ++++++++++++++++
 arch/arm/boot/dts/imx6q.dtsi          |   46 +++++++++++++++++++++++--
 arch/arm/mach-imx/clk-imx6q.c         |    4 ++
 arch/arm/mach-imx/mach-imx6q.c        |   37 +++++++++++++++++++-
 drivers/dma/imx-sdma.c                |   57 ++++++++++++++++++-------------
 drivers/i2c/busses/i2c-imx.c          |    9 +++++
 sound/soc/fsl/imx-audmux.c            |    8 ++++
 sound/soc/fsl/imx-sgtl5000.c          |   61 +++++++++++++++++++++++++--------
 8 files changed, 208 insertions(+), 44 deletions(-)

Thanks
Richard
-- 
1.7.5.4

[PATCH 01/11] dma: imx-sdma: make channel0 operations atomic

[Richard Zhao]

device_prep_dma_cyclic may be call in audio trigger function which is
atomic context, so we make it atomic too.

 - change channel0 lock to spinlock.
 - Use polling to wait for channel0 finish running.

Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 drivers/dma/imx-sdma.c |   57 +++++++++++++++++++++++++++--------------------
 1 files changed, 33 insertions(+), 24 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index fddccae..fc49ffa 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -24,7 +24,7 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
-#include <linux/wait.h>
+#include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/semaphore.h>
 #include <linux/spinlock.h>
@@ -324,7 +324,7 @@ struct sdma_engine {
 	struct dma_device		dma_device;
 	struct clk			*clk_ipg;
 	struct clk			*clk_ahb;
-	struct mutex			channel_0_lock;
+	spinlock_t		channel_0_lock;
 	struct sdma_script_start_addrs	*script_addrs;
 };
 
@@ -402,19 +402,31 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
 }
 
 /*
- * sdma_run_channel - run a channel and wait till it's done
+ * sdma_run_channel0 - run a channel and wait till it's done
  */
-static int sdma_run_channel(struct sdma_channel *sdmac)
+static int sdma_run_channel0(struct sdma_channel *sdmac)
 {
 	struct sdma_engine *sdma = sdmac->sdma;
 	int channel = sdmac->channel;
 	int ret;
+	unsigned long timeout = 500;
 
-	init_completion(&sdmac->done);
-
+	if (channel)
+		return -EINVAL;
 	sdma_enable_channel(sdma, channel);
 
-	ret = wait_for_completion_timeout(&sdmac->done, HZ);
+	while (!(ret = readl_relaxed(sdma->regs + SDMA_H_INTR) & 1)) {
+		if (timeout-- <= 0)
+			break;
+		udelay(1);
+	}
+
+	if (ret) {
+		/* Clear the interrupt status */
+		writel_relaxed(ret, sdma->regs + SDMA_H_INTR);
+	} else {
+		dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
+	}
 
 	return ret ? 0 : -ETIMEDOUT;
 }
@@ -426,17 +438,17 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 	void *buf_virt;
 	dma_addr_t buf_phys;
 	int ret;
-
-	mutex_lock(&sdma->channel_0_lock);
+	unsigned long flags;
 
 	buf_virt = dma_alloc_coherent(NULL,
 			size,
 			&buf_phys, GFP_KERNEL);
 	if (!buf_virt) {
-		ret = -ENOMEM;
-		goto err_out;
+		return -ENOMEM;
 	}
 
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
+
 	bd0->mode.command = C0_SETPM;
 	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
 	bd0->mode.count = size / 2;
@@ -445,12 +457,11 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 
 	memcpy(buf_virt, buf, size);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
+	ret = sdma_run_channel0(&sdma->channel[0]);
 
-	dma_free_coherent(NULL, size, buf_virt, buf_phys);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-err_out:
-	mutex_unlock(&sdma->channel_0_lock);
+	dma_free_coherent(NULL, size, buf_virt, buf_phys);
 
 	return ret;
 }
@@ -539,10 +550,6 @@ static void mxc_sdma_handle_channel(struct sdma_channel *sdmac)
 {
 	complete(&sdmac->done);
 
-	/* not interested in channel 0 interrupts */
-	if (sdmac->channel == 0)
-		return;
-
 	if (sdmac->flags & IMX_DMA_SG_LOOP)
 		sdma_handle_channel_loop(sdmac);
 	else
@@ -555,6 +562,8 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
 	unsigned long stat;
 
 	stat = readl_relaxed(sdma->regs + SDMA_H_INTR);
+	/* not interested in channel 0 interrupts */
+	stat &= ~1;
 	writel_relaxed(stat, sdma->regs + SDMA_H_INTR);
 
 	while (stat) {
@@ -660,6 +669,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	struct sdma_context_data *context = sdma->context;
 	struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd;
 	int ret;
+	unsigned long flags;
 
 	if (sdmac->direction == DMA_DEV_TO_MEM) {
 		load_address = sdmac->pc_from_device;
@@ -677,7 +687,7 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]);
 	dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]);
 
-	mutex_lock(&sdma->channel_0_lock);
+	spin_lock_irqsave(&sdma->channel_0_lock, flags);
 
 	memset(context, 0, sizeof(*context));
 	context->channel_state.pc = load_address;
@@ -696,10 +706,9 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	bd0->mode.count = sizeof(*context) / 4;
 	bd0->buffer_addr = sdma->context_phys;
 	bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;
+	ret = sdma_run_channel0(&sdma->channel[0]);
 
-	ret = sdma_run_channel(&sdma->channel[0]);
-
-	mutex_unlock(&sdma->channel_0_lock);
+	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
 	return ret;
 }
@@ -1305,7 +1314,7 @@ static int __init sdma_probe(struct platform_device *pdev)
 	if (!sdma)
 		return -ENOMEM;
 
-	mutex_init(&sdma->channel_0_lock);
+	spin_lock_init(&sdma->channel_0_lock);
 
 	sdma->dev = &pdev->dev;
 
-- 
1.7.5.4

[PATCH 02/11] ASoC: imx-sgtl5000: add of_node_put when probe fail.

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 sound/soc/fsl/imx-sgtl5000.c |   29 ++++++++++++++++++-----------
 1 files changed, 18 insertions(+), 11 deletions(-)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index e1a7441..73b935e 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -103,24 +103,28 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
 	codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0);
 	if (!ssi_np || !codec_np) {
 		dev_err(&pdev->dev, "phandle missing or invalid\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto fail;
 	}
 
 	ssi_pdev = of_find_device_by_node(ssi_np);
 	if (!ssi_pdev) {
 		dev_err(&pdev->dev, "failed to find SSI platform device\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto fail;
 	}
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
+	if (!data) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 
 	ret = of_property_read_u32(codec_np, "clock-frequency",
 				   &data->clk_frequency);
 	if (ret) {
 		dev_err(&pdev->dev, "clock-frequency missing or invalid\n");
-		return ret;
+		goto fail;
 	}
 
 	data->dai.name = "HiFi";
@@ -136,10 +140,10 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
 	data->card.dev = &pdev->dev;
 	ret = snd_soc_of_parse_card_name(&data->card, "model");
 	if (ret)
-		return ret;
+		goto fail;
 	ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
 	if (ret)
-		return ret;
+		goto fail;
 	data->card.num_links = 1;
 	data->card.dai_link = &data->dai;
 	data->card.dapm_widgets = imx_sgtl5000_dapm_widgets;
@@ -148,14 +152,17 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
 	ret = snd_soc_register_card(&data->card);
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
-		return ret;
+		goto fail;
 	}
 
 	platform_set_drvdata(pdev, data);
-	of_node_put(ssi_np);
-	of_node_put(codec_np);
+fail:
+	if (ssi_np)
+		of_node_put(ssi_np);
+	if (codec_np)
+		of_node_put(codec_np);
 
-	return 0;
+	return ret;
 }
 
 static int __devexit imx_sgtl5000_remove(struct platform_device *pdev)
-- 
1.7.5.4

[PATCH 03/11] ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000

[Richard Zhao]

From: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

It tries to clk_get the clock. And if it failed, it assumes the clock
by default enabled.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 sound/soc/fsl/imx-sgtl5000.c |   40 ++++++++++++++++++++++++++++++++--------
 1 files changed, 32 insertions(+), 8 deletions(-)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 73b935e..3a729ca 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -13,6 +13,8 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/of_i2c.h>
+#include <linux/clk.h>
 #include <sound/soc.h>
 
 #include "../codecs/sgtl5000.h"
@@ -25,6 +27,7 @@ struct imx_sgtl5000_data {
 	struct snd_soc_card card;
 	char codec_dai_name[DAI_NAME_SIZE];
 	char platform_name[DAI_NAME_SIZE];
+	struct clk *codec_clk;
 	unsigned int clk_frequency;
 };
 
@@ -58,6 +61,7 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct device_node *ssi_np, *codec_np;
 	struct platform_device *ssi_pdev;
+	struct i2c_client *codec_dev;
 	struct imx_sgtl5000_data *data;
 	int int_port, ext_port;
 	int ret;
@@ -113,6 +117,11 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
 		ret = -EINVAL;
 		goto fail;
 	}
+	codec_dev = of_find_i2c_device_by_node(codec_np);
+	if (!codec_dev) {
+		dev_err(&pdev->dev, "failed to find codec platform device\n");
+		return -EINVAL;
+	}
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
@@ -120,11 +129,20 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
 		goto fail;
 	}
 
-	ret = of_property_read_u32(codec_np, "clock-frequency",
-				   &data->clk_frequency);
-	if (ret) {
-		dev_err(&pdev->dev, "clock-frequency missing or invalid\n");
-		goto fail;
+	data->codec_clk = clk_get(&codec_dev->dev, NULL);
+	if (IS_ERR(data->codec_clk)) {
+		/* assuming clock enabled by default */
+		data->codec_clk = NULL;
+		ret = of_property_read_u32(codec_np, "clock-frequency",
+					&data->clk_frequency);
+		if (ret) {
+			dev_err(&codec_dev->dev,
+				"clock-frequency missing or invalid\n");
+			goto fail;
+		}
+	} else {
+		data->clk_frequency = clk_get_rate(data->codec_clk);
+		clk_prepare_enable(data->codec_clk);
 	}
 
 	data->dai.name = "HiFi";
@@ -140,10 +158,10 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
 	data->card.dev = &pdev->dev;
 	ret = snd_soc_of_parse_card_name(&data->card, "model");
 	if (ret)
-		goto fail;
+		goto clk_fail;
 	ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
 	if (ret)
-		goto fail;
+		goto clk_fail;
 	data->card.num_links = 1;
 	data->card.dai_link = &data->dai;
 	data->card.dapm_widgets = imx_sgtl5000_dapm_widgets;
@@ -152,10 +170,12 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
 	ret = snd_soc_register_card(&data->card);
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
-		goto fail;
+		goto clk_fail;
 	}
 
 	platform_set_drvdata(pdev, data);
+clk_fail:
+	clk_put(data->codec_clk);
 fail:
 	if (ssi_np)
 		of_node_put(ssi_np);
@@ -169,6 +189,10 @@ static int __devexit imx_sgtl5000_remove(struct platform_device *pdev)
 {
 	struct imx_sgtl5000_data *data = platform_get_drvdata(pdev);
 
+	if (data->codec_clk) {
+		clk_disable_unprepare(data->codec_clk);
+		clk_put(data->codec_clk);
+	}
 	snd_soc_unregister_card(&data->card);
 
 	return 0;
-- 
1.7.5.4

[PATCH 04/11] i2c: imx: add pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
 arch/arm/boot/dts/imx6q.dtsi          |   16 ++++++++++++++++
 drivers/i2c/busses/i2c-imx.c          |    9 +++++++++
 3 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 4663a4e..4e13293 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -50,6 +50,8 @@
 			i2c@021a0000 { /* I2C1 */
 				status = "okay";
 				clock-frequency = <100000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 
 				codec: sgtl5000@0a {
 					compatible = "fsl,sgtl5000";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 2ba32e7..fe8c80d 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -390,6 +390,22 @@
 				reg = <0x020e0000 0x4000>;
 
 				/* shared pinctrl settings */
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins =	"MX6Q_PAD_EIM_D21",
+								"MX6Q_PAD_EIM_D28";
+						fsl,hysteresis = <1>;
+						fsl,mux = <0x16 0x11>;
+						fsl,pull = <2>;
+						fsl,pue = <1>;
+						fsl,pke = <1>;
+						fsl,open-drain = <1>;
+						fsl,speed = <2>;
+						fsl,drive-strength = <6>;
+						fsl,slew-rate = <1>;
+					};
+				};
+
 				uart4 {
 					pinctrl_uart4_1: uart4grp-1 {
 						fsl,pins =	"MX6Q_PAD_KEY_COL0",
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index dfb84b7..7a52067 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_i2c.h>
@@ -470,6 +471,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	struct imx_i2c_struct *i2c_imx;
 	struct resource *res;
 	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
+	struct pinctrl *pct;
 	void __iomem *base;
 	resource_size_t res_size;
 	int irq, bitrate;
@@ -520,6 +522,13 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_imx->base			= base;
 	i2c_imx->res			= res;
 
+	pct = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pct)) {
+		dev_err(&pdev->dev, "can't get/select pinctrl\n");
+		ret = PTR_ERR(pct);
+		goto fail3;
+	}
+
 	/* Get I2C clock */
 	i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk");
 	if (IS_ERR(i2c_imx->clk)) {
-- 
1.7.5.4

[PATCH 05/11] ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function

[Richard Zhao]

It'll be easier to add other board specific code.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/mach-imx/mach-imx6q.c |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index da6c1d9..d25c5d8 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -75,11 +75,16 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 	return 0;
 }
 
+static void __init imx6q_sabrelite_init(void)
+{
+	phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+				ksz9021rn_phy_fixup);
+}
+
 static void __init imx6q_init_machine(void)
 {
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
-					   ksz9021rn_phy_fixup);
+		imx6q_sabrelite_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
-- 
1.7.5.4

[PATCH 06/11] ARM: dts: imx6q-sabrelite: add ssi device

[Richard Zhao]

From: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    9 +++++++++
 arch/arm/boot/dts/imx6q.dtsi          |   18 +++++++++++++++---
 2 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 4e13293..7bd8855 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -22,6 +22,15 @@
 	};
 
 	soc {
+		aips-bus@02000000 { /* AIPS1 */
+			spba-bus@02000000 {
+				ssi1: ssi@02028000 {
+					fsl,mode = "i2s-slave";
+					status = "okay";
+				};
+			};
+		};
+
 		aips-bus@02100000 { /* AIPS2 */
 			enet@02188000 {
 				phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index fe8c80d..da42fc0 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -177,19 +177,31 @@
 					interrupts = <0 51 0x04>;
 				};
 
-				ssi@02028000 { /* SSI1 */
+				ssi1: ssi@02028000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <38 37>;
+					status = "disabled";
 				};
 
-				ssi@0202c000 { /* SSI2 */
+				ssi2: ssi@0202c000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <42 41>;
+					status = "disabled";
 				};
 
-				ssi@02030000 { /* SSI3 */
+				ssi3: ssi@02030000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <46 45>;
+					status = "disabled";
 				};
 
 				asrc@02034000 {
-- 
1.7.5.4

[PATCH 07/11] ARM: dts: imx6q-sabrelite: add audmux device

[Richard Zhao]

From: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    3 +++
 arch/arm/boot/dts/imx6q.dtsi          |    2 ++
 2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 7bd8855..02f93bc 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -52,6 +52,9 @@
 				status = "okay";
 			};
 
+			audmux@021d8000 {
+				status = "okay";
+			};
 			uart2: uart@021e8000 {
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index da42fc0..7bf402e 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -596,7 +596,9 @@
 			};
 
 			audmux@021d8000 {
+				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 				reg = <0x021d8000 0x4000>;
+				status = "disabled";
 			};
 
 			mipi@021dc000 { /* MIPI-CSI */
-- 
1.7.5.4

[PATCH 08/11] ASoC: imx-audmux: add pinctrl support

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    3 +++
 arch/arm/boot/dts/imx6q.dtsi          |   10 ++++++++++
 sound/soc/fsl/imx-audmux.c            |    8 ++++++++
 3 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 02f93bc..cdae2dd 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -54,7 +54,10 @@
 
 			audmux@021d8000 {
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
 			};
+
 			uart2: uart@021e8000 {
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 7bf402e..3c3004d 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -402,6 +402,16 @@
 				reg = <0x020e0000 0x4000>;
 
 				/* shared pinctrl settings */
+				audmux {
+					pinctrl_audmux_1: audmux-1 {
+						fsl,pins =	"MX6Q_PAD_SD2_DAT0",
+								"MX6Q_PAD_SD2_DAT3",
+								"MX6Q_PAD_SD2_DAT2",
+								"MX6Q_PAD_SD2_DAT1";
+						fsl,mux = <3 3 3 3>;
+					};
+				};
+
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
 						fsl,pins =	"MX6Q_PAD_EIM_D21",
diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
index f237003..6c7dfc0 100644
--- a/sound/soc/fsl/imx-audmux.c
+++ b/sound/soc/fsl/imx-audmux.c
@@ -26,6 +26,7 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "imx-audmux.h"
 
@@ -249,6 +250,7 @@ EXPORT_SYMBOL_GPL(imx_audmux_v2_configure_port);
 static int __devinit imx_audmux_probe(struct platform_device *pdev)
 {
 	struct resource *res;
+	struct pinctrl *pct;
 	const struct of_device_id *of_id =
 			of_match_device(imx_audmux_dt_ids, &pdev->dev);
 
@@ -257,6 +259,12 @@ static int __devinit imx_audmux_probe(struct platform_device *pdev)
 	if (!audmux_base)
 		return -EADDRNOTAVAIL;
 
+	pct = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pct)) {
+		dev_err(&pdev->dev, "setup pinctrl failed!");
+		return PTR_ERR(pct);
+	}
+
 	audmux_clk = clk_get(&pdev->dev, "audmux");
 	if (IS_ERR(audmux_clk)) {
 		dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
-- 
1.7.5.4

[PATCH 09/11] ARM: imx6q: add ssi1 clk_lookup

[Richard Zhao]

It's used by audio drivers.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/mach-imx/clk-imx6q.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index f40a35d..9a03dcc 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -418,6 +418,7 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
 	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
 	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
+	clk_register_clkdev(clk[ssi1], NULL, "2028000.ssi");
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
 		c = clk_get_sys(clks_init_on[i], NULL);
-- 
1.7.5.4

[PATCH 10/11] ARM: imx6q_sabrelite: clkdev_add cko1 for sgtl5000

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/mach-imx/clk-imx6q.c  |    3 +++
 arch/arm/mach-imx/mach-imx6q.c |   28 ++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 9a03dcc..4ea0de0 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -419,6 +419,9 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
 	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
 	clk_register_clkdev(clk[ssi1], NULL, "2028000.ssi");
+	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
+	clk_register_clkdev(clk[ahb], "ahb", NULL);
+	clk_register_clkdev(clk[cko1], "cko1", NULL);
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
 		c = clk_get_sys(clks_init_on[i], NULL);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index d25c5d8..e9b2522 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,6 +10,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/clkdev.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -75,10 +77,36 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 	return 0;
 }
 
+static void __init imx6q_cko1_setup(void)
+{
+	struct clk *cko1_sel, *ahb, *cko1;
+	unsigned long rate;
+
+	cko1_sel = clk_get_sys(NULL, "cko1_sel");
+	ahb = clk_get_sys(NULL, "ahb");
+	cko1 = clk_get_sys(NULL, "cko1");
+	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
+		printk(KERN_ERR "cko1 setup failed!\n");
+		goto put_clk;
+	}
+	clk_set_parent(cko1_sel, ahb);
+	rate = clk_round_rate(cko1, 16000000);
+	clk_set_rate(cko1, rate);
+	clk_register_clkdev(cko1, NULL, "0-000a");
+put_clk:
+	if (!IS_ERR(cko1_sel))
+		clk_put(cko1_sel);
+	if (!IS_ERR(ahb))
+		clk_put(ahb);
+	if (!IS_ERR(cko1))
+		clk_put(cko1);
+}
+
 static void __init imx6q_sabrelite_init(void)
 {
 	phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
+	imx6q_cko1_setup();
 }
 
 static void __init imx6q_init_machine(void)
-- 
1.7.5.4

[PATCH 11/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Richard Zhao]

From: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index cdae2dd..20aa767 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -97,4 +97,17 @@
 			regulator-always-on;
 		};
 	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
 };
-- 
1.7.5.4

[PATCH 07/11] ARM: dts: imx6q-sabrelite: add audmux device

[Richard Zhao]

From: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    3 +++
 arch/arm/boot/dts/imx6q.dtsi          |    2 ++
 2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 7bd8855..02f93bc 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -52,6 +52,9 @@
 				status = "okay";
 			};
 
+			audmux@021d8000 {
+				status = "okay";
+			};
 			uart2: uart@021e8000 {
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index da42fc0..7bf402e 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -596,7 +596,9 @@
 			};
 
 			audmux@021d8000 {
+				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 				reg = <0x021d8000 0x4000>;
+				status = "disabled";
 			};
 
 			mipi@021dc000 { /* MIPI-CSI */
-- 
1.7.5.4