linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
	w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org,
	swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
	olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Laxman Dewangan
	<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH V2 3/4] i2c: tegra: support for I2C_M_NOSTART functionality
Date: Tue, 12 Jun 2012 16:07:30 +0530	[thread overview]
Message-ID: <1339497451-26260-4-git-send-email-ldewangan@nvidia.com> (raw)
In-Reply-To: <1339497451-26260-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

Adding support for functionality I2C_M_NOSTART.
When multiple message transfer request made through i2c
and if any message is flagged with I2C_M_NOSTART then
it will not send the start/repeat-start and address of
that message i.e. sends data directly.

Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
This is rebased of earlier patch on same support.
At this time using the new flag I2C_FUNC_NOSTART.

No change from V1.

 drivers/i2c/busses/i2c-tegra.c |   31 ++++++++++++++++++++++++++-----
 1 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index f906487..b093b66 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -97,8 +97,21 @@
 #define I2C_HEADER_10BIT_ADDR			(1<<18)
 #define I2C_HEADER_IE_ENABLE			(1<<17)
 #define I2C_HEADER_REPEAT_START			(1<<16)
+#define I2C_HEADER_CONTINUE_XFER		(1<<15)
 #define I2C_HEADER_MASTER_ADDR_SHIFT		12
 #define I2C_HEADER_SLAVE_ADDR_SHIFT		1
+/*
+ * msg_end_type: The bus control which need to be send at end of transfer.
+ * @MSG_END_STOP: Send stop pulse at end of transfer.
+ * @MSG_END_REPEAT_START: Send repeat start at end of transfer.
+ * @MSG_END_CONTINUE: The following on message is coming and so do not send
+ *		stop or repeat start.
+ */
+enum msg_end_type {
+	MSG_END_STOP,
+	MSG_END_REPEAT_START,
+	MSG_END_CONTINUE,
+};
 
 /**
  * struct tegra_i2c_dev	- per device i2c context
@@ -465,7 +478,7 @@ err:
 }
 
 static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
-	struct i2c_msg *msg, int stop)
+	struct i2c_msg *msg, enum msg_end_type end_state)
 {
 	u32 packet_header;
 	u32 int_mask;
@@ -492,7 +505,9 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
 
 	packet_header = I2C_HEADER_IE_ENABLE;
-	if (!stop)
+	if (end_state == MSG_END_CONTINUE)
+		packet_header |= I2C_HEADER_CONTINUE_XFER;
+	else if (end_state == MSG_END_REPEAT_START)
 		packet_header |= I2C_HEADER_REPEAT_START;
 	if (msg->flags & I2C_M_TEN) {
 		packet_header |= msg->addr;
@@ -564,8 +579,14 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 
 	clk_prepare_enable(i2c_dev->clk);
 	for (i = 0; i < num; i++) {
-		int stop = (i == (num - 1)) ? 1  : 0;
-		ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], stop);
+		enum msg_end_type end_type = MSG_END_STOP;
+		if (i < (num - 1)) {
+			if (msgs[i + 1].flags & I2C_M_NOSTART)
+				end_type = MSG_END_CONTINUE;
+			else
+				end_type = MSG_END_REPEAT_START;
+		}
+		ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
 		if (ret)
 			break;
 	}
@@ -576,7 +597,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 static u32 tegra_i2c_func(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
-		I2C_FUNC_PROTOCOL_MANGLING;
+		I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART;
 }
 
 static const struct i2c_algorithm tegra_i2c_algo = {
-- 
1.7.1.1

  parent reply	other threads:[~2012-06-12 10:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-12 10:37 [PATCH v2 0/4] i2c: tegra: Bug fixes, cleanups and M_NOSTART support Laxman Dewangan
     [not found] ` <1339497451-26260-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-06-12 10:37   ` [PATCH V2 1/4] i2c: tegra: make sure register writes completes Laxman Dewangan
     [not found]     ` <1339497451-26260-2-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-06-12 16:08       ` Stephen Warren
2012-06-12 10:37   ` [PATCH V2 2/4] i2c: tegra: add PROTOCOL_MANGLING as supported functionality Laxman Dewangan
2012-06-12 10:37   ` Laxman Dewangan [this message]
     [not found]     ` <1339497451-26260-4-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-06-12 16:25       ` [PATCH V2 3/4] i2c: tegra: support for I2C_M_NOSTART functionality Wolfram Sang
2012-06-12 10:37 ` [PATCH V2 4/4] i2c: tegra: make all resource allocation through devm_* Laxman Dewangan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1339497451-26260-4-git-send-email-ldewangan@nvidia.com \
    --to=ldewangan-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
    --cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
    --cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
    --cc=w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).