[PATCH 1/1] i2c:clk: preparation for switch to common clock framework

[Murali Karicheri <m-karicheri2-l0cyMroinI0@public.gmane.org>]

As a first step towards migrating davinci platforms to use common clock
framework, replace all instances of clk_enable() with clk_prepare_enable()
and clk_disable() with clk_disable_unprepare(). Until the platform is
switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just
adds a might_sleep() call and would work without any issues.

This will make it easy later to switch to common clk based implementation
of clk driver from DaVinci specific driver.

Signed-off-by: Murali Karicheri <m-karicheri2-l0cyMroinI0@public.gmane.org>

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index b6185dc..85ce548 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -704,7 +704,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		r = -ENODEV;
 		goto err_free_mem;
 	}
-	clk_enable(dev->clk);
+	clk_prepare_enable(dev->clk);
 
 	dev->base = ioremap(mem->start, resource_size(mem));
 	if (!dev->base) {
@@ -751,7 +751,7 @@ err_free_irq:
 err_unuse_clocks:
 	iounmap(dev->base);
 err_mem_ioremap:
-	clk_disable(dev->clk);
+	clk_disable_unprepare(dev->clk);
 	clk_put(dev->clk);
 	dev->clk = NULL;
 err_free_mem:
@@ -775,7 +775,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&dev->adapter);
 	put_device(&pdev->dev);
 
-	clk_disable(dev->clk);
+	clk_disable_unprepare(dev->clk);
 	clk_put(dev->clk);
 	dev->clk = NULL;
 
@@ -797,7 +797,7 @@ static int davinci_i2c_suspend(struct device *dev)
 
 	/* put I2C into reset */
 	davinci_i2c_reset_ctrl(i2c_dev, 0);
-	clk_disable(i2c_dev->clk);
+	clk_disable_unprepare(i2c_dev->clk);
 
 	return 0;
 }
@@ -807,7 +807,7 @@ static int davinci_i2c_resume(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
-	clk_enable(i2c_dev->clk);
+	clk_prepare_enable(i2c_dev->clk);
 	/* take I2C out of reset */
 	davinci_i2c_reset_ctrl(i2c_dev, 1);
 
-- 
1.7.9.5