[PATCH v2 00/34] i.MX multi-platform support

[PATCH v2 00/34] i.MX multi-platform support

[Shawn Guo]

Here is the second post, which should have addressed the comments that
reviewers put on v1.

It's available on branch below.

  git://git.linaro.org/people/shawnguo/linux-2.6.git imx/multi-platform-v2

And it's based on the following branches.

  calxeda/multi-plat
  arm-soc/multiplatform/platform-data
  arm-soc/multiplatform/smp_ops
  arm-soc/imx/cleanup
  arm-soc/imx/dt
  sound/for-3.7

Subsystem maintainers,

I plan to send the whole series for 3.7 via arm-soc tree.  Please let
me know if you have problem with that.  Thanks.

Shawn

---

Shawn Guo (34):
  ARM: imx: include board headers in the same folder
  ARM: imx: move iomux drivers and headers into mach-imx
  ARM: imx: remove unnecessary inclusion from device-imx*.h
  ARM: imx: move platform device code into mach-imx
  ARM: imx: merge plat-mxc into mach-imx
  ARM: imx: include common.h rather than mach/common.h
  ARM: imx: ARM: imx: include cpuidle.h rather than mach/cpuidle.h
  ARM: imx: include iim.h rather than mach/iim.h
  ARM: imx: include iram.h rather than mach/iram.h
  ARM: imx: include ulpi.h rather than mach/ulpi.h
  media: mx1_camera: remove the driver
  ARM: imx: remove mach/dma-mx1-mx2.h
  dma: ipu: rename mach/ipu.h to include/linux/dma/ipu-dma.h
  dma: imx-sdma: remove unneeded mach/hardware.h inclusion
  ASoC: imx-ssi: remove unneeded mach/hardware.h inclusion
  usb: ehci-mxc: remove unneeded mach/hardware.h inclusion
  video: mx3fb: remove unneeded mach/hardware.h inclusion
  watchdog: imx2_wdt: remove unneeded mach/hardware.h inclusion
  i2c: imx: remove cpu_is_xxx by using platform_device_id
  mtd: mxc_nand: remove cpu_is_xxx by using platform_device_id
  rtc: mxc_rtc: remove cpu_is_xxx by using platform_device_id
  dma: imx-dma: use devm_kzalloc and devm_request_irq
  dma: imx-dma: retrieve MEM and IRQ from resources
  dma: imx-dma: remove cpu_is_xxx by using platform_device_id
  media: mx2_camera: remove dead code in mx2_camera_add_device
  media: mx2_camera: use managed functions to clean up code
  media: mx2_camera: remove cpu_is_xxx by using platform_device_id
  mmc: mxcmmc: remove cpu_is_xxx by using platform_device_id
  video: imxfb: remove cpu_is_xxx by using platform_device_id
  ARM: imx: move debug macros to include/debug
  ARM: imx: include hardware.h rather than mach/hardware.h
  ARM: imx: remove header file mach/irqs.h
  ARM: imx: call mxc_device_init() in soc specific function
  ARM: imx: enable multi-platform build

 .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |    4 +-
 MAINTAINERS                                        |    1 -
 arch/arm/Kconfig                                   |   15 +-
 arch/arm/Kconfig.debug                             |    8 +
 arch/arm/Makefile                                  |    1 -
 arch/arm/boot/dts/imx27.dtsi                       |    4 +-
 arch/arm/boot/dts/imx51.dtsi                       |    4 +-
 arch/arm/boot/dts/imx53.dtsi                       |    6 +-
 arch/arm/boot/dts/imx6q.dtsi                       |    6 +-
 arch/arm/configs/imx_v4_v5_defconfig               |    5 +-
 arch/arm/configs/imx_v6_v7_defconfig               |    3 +-
 .../mach/debug-macro.S => include/debug/imx.S}     |   33 +-
 arch/arm/{plat-mxc => mach-imx}/3ds_debugboard.c   |    2 +-
 .../include/mach => mach-imx}/3ds_debugboard.h     |    0
 arch/arm/mach-imx/Kconfig                          |   89 +-
 arch/arm/mach-imx/Makefile                         |   23 +-
 arch/arm/{plat-mxc => mach-imx}/avic.c             |    5 +-
 .../include/mach => mach-imx}/board-mx31lilly.h    |    0
 .../include/mach => mach-imx}/board-mx31lite.h     |    0
 .../include/mach => mach-imx}/board-mx31moboard.h  |    0
 .../include/mach => mach-imx}/board-pcm038.h       |    0
 arch/arm/mach-imx/clk-imx1.c                       |   18 +-
 arch/arm/mach-imx/clk-imx21.c                      |   18 +-
 arch/arm/mach-imx/clk-imx25.c                      |   26 +-
 arch/arm/mach-imx/clk-imx27.c                      |   40 +-
 arch/arm/mach-imx/clk-imx31.c                      |   21 +-
 arch/arm/mach-imx/clk-imx35.c                      |   13 +-
 arch/arm/mach-imx/clk-imx51-imx53.c                |   15 +-
 arch/arm/mach-imx/clk-imx6q.c                      |    3 +-
 arch/arm/mach-imx/clk-pllv1.c                      |    4 +-
 .../{plat-mxc/include/mach => mach-imx}/common.h   |    1 +
 arch/arm/mach-imx/cpu-imx25.c                      |    5 +-
 arch/arm/mach-imx/cpu-imx27.c                      |    2 +-
 arch/arm/mach-imx/cpu-imx31.c                      |    7 +-
 arch/arm/mach-imx/cpu-imx35.c                      |    5 +-
 arch/arm/mach-imx/cpu-imx5.c                       |    3 +-
 arch/arm/{plat-mxc => mach-imx}/cpu.c              |    3 +-
 arch/arm/mach-imx/cpu_op-mx51.c                    |    3 +-
 arch/arm/{plat-mxc => mach-imx}/cpufreq.c          |    3 +-
 arch/arm/{plat-mxc => mach-imx}/cpuidle.c          |    0
 .../{plat-mxc/include/mach => mach-imx}/cpuidle.h  |    0
 arch/arm/mach-imx/devices-imx1.h                   |    3 +-
 arch/arm/mach-imx/devices-imx21.h                  |    3 +-
 arch/arm/mach-imx/devices-imx25.h                  |    3 +-
 arch/arm/mach-imx/devices-imx27.h                  |    3 +-
 arch/arm/mach-imx/devices-imx31.h                  |    3 +-
 arch/arm/mach-imx/devices-imx35.h                  |    3 +-
 arch/arm/mach-imx/devices-imx50.h                  |    3 +-
 arch/arm/mach-imx/devices-imx51.h                  |    3 +-
 arch/arm/{plat-mxc => mach-imx}/devices/Kconfig    |    3 -
 arch/arm/{plat-mxc => mach-imx}/devices/Makefile   |    3 +-
 .../mach => mach-imx/devices}/devices-common.h     |   19 +-
 arch/arm/{plat-mxc => mach-imx/devices}/devices.c  |    4 +-
 .../devices/platform-ahci-imx.c                    |    5 +-
 .../{plat-mxc => mach-imx}/devices/platform-fec.c  |    5 +-
 .../devices/platform-flexcan.c                     |    4 +-
 .../devices/platform-fsl-usb2-udc.c                |    5 +-
 .../devices/platform-gpio-mxc.c                    |    2 +-
 .../devices/platform-gpio_keys.c                   |    5 +-
 .../devices/platform-imx-dma.c                     |   23 +-
 .../devices/platform-imx-fb.c                      |   16 +-
 .../devices/platform-imx-i2c.c                     |   32 +-
 .../devices/platform-imx-keypad.c                  |    4 +-
 .../devices/platform-imx-ssi.c                     |    4 +-
 .../devices/platform-imx-uart.c                    |    4 +-
 .../devices/platform-imx2-wdt.c                    |    5 +-
 .../devices/platform-imx21-hcd.c                   |    4 +-
 .../devices/platform-imx_udc.c                     |    4 +-
 .../devices/platform-imxdi_rtc.c                   |    5 +-
 .../devices/platform-ipu-core.c                    |    5 +-
 .../devices/platform-mx2-camera.c                  |   16 +-
 .../devices/platform-mxc-ehci.c                    |    5 +-
 .../devices/platform-mxc-mmc.c                     |   20 +-
 .../devices/platform-mxc_nand.c                    |   25 +-
 .../devices/platform-mxc_pwm.c                     |    4 +-
 .../devices/platform-mxc_rnga.c                    |    4 +-
 .../devices/platform-mxc_rtc.c                     |   13 +-
 .../devices/platform-mxc_w1.c                      |    4 +-
 .../devices/platform-pata_imx.c                    |    4 +-
 .../devices/platform-sdhci-esdhc-imx.c             |    5 +-
 .../devices/platform-spi_imx.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx25.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx27.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx31.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx35.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx5.c                      |    4 +-
 arch/arm/{plat-mxc => mach-imx}/epit.c             |    6 +-
 .../include/mach => mach-imx}/eukrea-baseboards.h  |    0
 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c       |    7 +-
 arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c     |    8 +-
 arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c     |    7 +-
 arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c     |    7 +-
 .../{plat-mxc/include/mach => mach-imx}/hardware.h |   26 +-
 arch/arm/mach-imx/hotplug.c                        |    3 +-
 arch/arm/{plat-mxc/include/mach => mach-imx}/iim.h |    0
 arch/arm/mach-imx/imx27-dt.c                       |   11 +-
 arch/arm/mach-imx/imx31-dt.c                       |    5 +-
 arch/arm/mach-imx/imx51-dt.c                       |    9 +-
 arch/arm/mach-imx/include/mach/dma-mx1-mx2.h       |   10 -
 arch/arm/mach-imx/iomux-imx31.c                    |    5 +-
 .../include/mach => mach-imx}/iomux-mx1.h          |    2 +-
 .../include/mach => mach-imx}/iomux-mx21.h         |    4 +-
 .../include/mach => mach-imx}/iomux-mx25.h         |    2 +-
 .../include/mach => mach-imx}/iomux-mx27.h         |    4 +-
 .../include/mach => mach-imx}/iomux-mx2x.h         |    0
 .../include/mach => mach-imx}/iomux-mx3.h          |    0
 .../include/mach => mach-imx}/iomux-mx35.h         |    2 +-
 .../include/mach => mach-imx}/iomux-mx50.h         |    2 +-
 .../include/mach => mach-imx}/iomux-mx51.h         |    2 +-
 arch/arm/{plat-mxc => mach-imx}/iomux-v1.c         |    5 +-
 .../{plat-mxc/include/mach => mach-imx}/iomux-v1.h |    0
 arch/arm/{plat-mxc => mach-imx}/iomux-v3.c         |    5 +-
 .../{plat-mxc/include/mach => mach-imx}/iomux-v3.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/iram.h |    0
 arch/arm/{plat-mxc => mach-imx}/iram_alloc.c       |    3 +-
 arch/arm/{plat-mxc => mach-imx}/irq-common.c       |    0
 arch/arm/{plat-mxc => mach-imx}/irq-common.h       |    3 +
 arch/arm/mach-imx/lluart.c                         |    3 +-
 arch/arm/mach-imx/mach-apf9328.c                   |    7 +-
 arch/arm/mach-imx/mach-armadillo5x0.c              |    9 +-
 arch/arm/mach-imx/mach-bug.c                       |    7 +-
 arch/arm/mach-imx/mach-cpuimx27.c                  |   11 +-
 arch/arm/mach-imx/mach-cpuimx35.c                  |    9 +-
 arch/arm/mach-imx/mach-cpuimx51sd.c                |    9 +-
 arch/arm/mach-imx/mach-eukrea_cpuimx25.c           |   10 +-
 arch/arm/mach-imx/mach-imx27_visstrim_m10.c        |    6 +-
 arch/arm/mach-imx/mach-imx27ipcam.c                |    6 +-
 arch/arm/mach-imx/mach-imx27lite.c                 |    6 +-
 arch/arm/mach-imx/mach-imx53.c                     |   11 +-
 arch/arm/mach-imx/mach-imx6q.c                     |    6 +-
 arch/arm/mach-imx/mach-kzm_arm11_01.c              |    7 +-
 arch/arm/mach-imx/mach-mx1ads.c                    |    7 +-
 arch/arm/mach-imx/mach-mx21ads.c                   |    6 +-
 arch/arm/mach-imx/mach-mx25_3ds.c                  |    8 +-
 arch/arm/mach-imx/mach-mx27_3ds.c                  |   10 +-
 arch/arm/mach-imx/mach-mx27ads.c                   |    6 +-
 arch/arm/mach-imx/mach-mx31_3ds.c                  |   12 +-
 arch/arm/mach-imx/mach-mx31ads.c                   |    5 +-
 arch/arm/mach-imx/mach-mx31lilly.c                 |   11 +-
 arch/arm/mach-imx/mach-mx31lite.c                  |   11 +-
 arch/arm/mach-imx/mach-mx31moboard.c               |   14 +-
 arch/arm/mach-imx/mach-mx35_3ds.c                  |    8 +-
 arch/arm/mach-imx/mach-mx50_rdp.c                  |    7 +-
 arch/arm/mach-imx/mach-mx51_3ds.c                  |    9 +-
 arch/arm/mach-imx/mach-mx51_babbage.c              |    7 +-
 arch/arm/mach-imx/mach-mxt_td60.c                  |    6 +-
 arch/arm/mach-imx/mach-pca100.c                    |    8 +-
 arch/arm/mach-imx/mach-pcm037.c                    |    8 +-
 arch/arm/mach-imx/mach-pcm037_eet.c                |    5 +-
 arch/arm/mach-imx/mach-pcm038.c                    |   13 +-
 arch/arm/mach-imx/mach-pcm043.c                    |    9 +-
 arch/arm/mach-imx/mach-qong.c                      |    6 +-
 arch/arm/mach-imx/mach-scb9328.c                   |    7 +-
 arch/arm/mach-imx/mach-vpr200.c                    |    7 +-
 arch/arm/mach-imx/mm-imx1.c                        |    9 +-
 arch/arm/mach-imx/mm-imx21.c                       |   14 +-
 arch/arm/mach-imx/mm-imx25.c                       |   12 +-
 arch/arm/mach-imx/mm-imx27.c                       |   14 +-
 arch/arm/mach-imx/mm-imx3.c                        |   13 +-
 arch/arm/mach-imx/mm-imx5.c                        |   12 +-
 arch/arm/mach-imx/mx1-camera-fiq-ksym.c            |   18 -
 arch/arm/mach-imx/mx1-camera-fiq.S                 |   35 -
 arch/arm/{plat-mxc/include/mach => mach-imx}/mx1.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx21.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx25.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx27.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx2x.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx31.h |    0
 arch/arm/mach-imx/mx31lilly-db.c                   |    9 +-
 arch/arm/mach-imx/mx31lite-db.c                    |    9 +-
 arch/arm/mach-imx/mx31moboard-devboard.c           |    9 +-
 arch/arm/mach-imx/mx31moboard-marxbot.c            |    9 +-
 arch/arm/mach-imx/mx31moboard-smartbot.c           |   11 +-
 .../arm/{plat-mxc/include/mach => mach-imx}/mx35.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx3x.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx50.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx51.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx53.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx6q.h |    0
 arch/arm/{plat-mxc/include/mach => mach-imx}/mxc.h |    0
 arch/arm/mach-imx/pcm970-baseboard.c               |    7 +-
 arch/arm/mach-imx/platsmp.c                        |    5 +-
 arch/arm/mach-imx/pm-imx27.c                       |    3 +-
 arch/arm/mach-imx/pm-imx3.c                        |    7 +-
 arch/arm/mach-imx/pm-imx5.c                        |    7 +-
 arch/arm/mach-imx/pm-imx6q.c                       |    5 +-
 arch/arm/{plat-mxc => mach-imx}/ssi-fiq-ksym.c     |    0
 arch/arm/{plat-mxc => mach-imx}/ssi-fiq.S          |    0
 arch/arm/{plat-mxc => mach-imx}/system.c           |    5 +-
 arch/arm/{plat-mxc => mach-imx}/time.c             |    5 +-
 arch/arm/{plat-mxc => mach-imx}/tzic.c             |    6 +-
 arch/arm/{plat-mxc => mach-imx}/ulpi.c             |    2 +-
 .../arm/{plat-mxc/include/mach => mach-imx}/ulpi.h |    0
 arch/arm/plat-mxc/Kconfig                          |   89 --
 arch/arm/plat-mxc/Makefile                         |   24 -
 arch/arm/plat-mxc/devices/platform-mx1-camera.c    |   42 -
 arch/arm/plat-mxc/include/mach/irqs.h              |   21 -
 arch/arm/plat-mxc/include/mach/timex.h             |   22 -
 arch/arm/plat-mxc/include/mach/uncompress.h        |  132 ---
 drivers/dma/imx-dma.c                              |  137 +--
 drivers/dma/imx-sdma.c                             |    1 -
 drivers/dma/ipu/ipu_idmac.c                        |    3 +-
 drivers/dma/ipu/ipu_irq.c                          |    3 +-
 drivers/i2c/busses/i2c-imx.c                       |   40 +-
 drivers/media/video/Kconfig                        |   12 -
 drivers/media/video/Makefile                       |    1 -
 drivers/media/video/mx1_camera.c                   |  889 --------------------
 drivers/media/video/mx2_camera.c                   |  246 +++---
 drivers/media/video/mx3_camera.c                   |    2 +-
 drivers/mmc/host/mxcmmc.c                          |   31 +-
 drivers/mtd/nand/mxc_nand.c                        |   86 +-
 drivers/rtc/rtc-mxc.c                              |   34 +-
 drivers/usb/host/ehci-mxc.c                        |    1 -
 drivers/video/imxfb.c                              |   38 +-
 drivers/video/mx3fb.c                              |    3 +-
 drivers/watchdog/imx2_wdt.c                        |    1 -
 .../mach/ipu.h => include/linux/dma/ipu-dma.h      |    6 +-
 include/linux/platform_data/asoc-imx-ssi.h         |    2 +
 include/linux/platform_data/camera-mx1.h           |   35 -
 include/linux/platform_data/dma-imx.h              |    4 +-
 sound/soc/fsl/imx-pcm-fiq.c                        |    1 -
 sound/soc/fsl/imx-ssi.c                            |    1 -
 222 files changed, 1115 insertions(+), 2161 deletions(-)
 rename arch/arm/{plat-mxc/include/mach/debug-macro.S => include/debug/imx.S} (59%)
 rename arch/arm/{plat-mxc => mach-imx}/3ds_debugboard.c (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/3ds_debugboard.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/avic.c (98%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/board-mx31lilly.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/board-mx31lite.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/board-mx31moboard.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/board-pcm038.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/common.h (99%)
 rename arch/arm/{plat-mxc => mach-imx}/cpu.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/cpufreq.c (99%)
 rename arch/arm/{plat-mxc => mach-imx}/cpuidle.c (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/cpuidle.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/Kconfig (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/Makefile (96%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx/devices}/devices-common.h (96%)
 rename arch/arm/{plat-mxc => mach-imx/devices}/devices.c (92%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-ahci-imx.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-fec.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-flexcan.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-fsl-usb2-udc.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-gpio-mxc.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-gpio_keys.c (94%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-dma.c (63%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-fb.c (79%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-i2c.c (76%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-keypad.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-ssi.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-uart.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx2-wdt.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx21-hcd.c (94%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx_udc.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imxdi_rtc.c (94%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-ipu-core.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mx2-camera.c (83%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc-ehci.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc-mmc.c (76%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_nand.c (74%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_pwm.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_rnga.c (95%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_rtc.c (77%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_w1.c (95%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-pata_imx.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-sdhci-esdhc-imx.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-spi_imx.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/epit.c (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/eukrea-baseboards.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/hardware.h (94%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iim.h (100%)
 delete mode 100644 arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx1.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx21.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx25.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx27.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx2x.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx3.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx35.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx50.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx51.h (99%)
 rename arch/arm/{plat-mxc => mach-imx}/iomux-v1.c (98%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-v1.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/iomux-v3.c (97%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-v3.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iram.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/iram_alloc.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/irq-common.c (100%)
 rename arch/arm/{plat-mxc => mach-imx}/irq-common.h (94%)
 delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
 delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx1.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx21.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx25.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx27.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx2x.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx31.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx35.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx3x.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx50.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx51.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx53.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx6q.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mxc.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/ssi-fiq-ksym.c (100%)
 rename arch/arm/{plat-mxc => mach-imx}/ssi-fiq.S (100%)
 rename arch/arm/{plat-mxc => mach-imx}/system.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/time.c (99%)
 rename arch/arm/{plat-mxc => mach-imx}/tzic.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/ulpi.c (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/ulpi.h (100%)
 delete mode 100644 arch/arm/plat-mxc/Kconfig
 delete mode 100644 arch/arm/plat-mxc/Makefile
 delete mode 100644 arch/arm/plat-mxc/devices/platform-mx1-camera.c
 delete mode 100644 arch/arm/plat-mxc/include/mach/irqs.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/timex.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/uncompress.h
 delete mode 100644 drivers/media/video/mx1_camera.c
 rename arch/arm/plat-mxc/include/mach/ipu.h => include/linux/dma/ipu-dma.h (97%)
 delete mode 100644 include/linux/platform_data/camera-mx1.h

-- 
1.7.9.5

[PATCH v2 19/34] i2c: imx: remove cpu_is_xxx by using platform_device_id

[Shawn Guo]

This is some amount of work left/forgot from device tree conversion.
Instead of checking cpu_is_xxx to determine the controller type, the
driver should use platform_device_id, which should match the device
tree compatible string.

The patch changes the driver to use platform_device_id rather than
cpu_is_xxx to determine the controller type/version.  It also updates
the platform code and device tree source accordingly.

As the result, mach/hardware.h inclusion gets removed from the driver.

Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Cc: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |    4 +-
 arch/arm/boot/dts/imx27.dtsi                       |    4 +-
 arch/arm/boot/dts/imx51.dtsi                       |    4 +-
 arch/arm/boot/dts/imx53.dtsi                       |    6 +--
 arch/arm/boot/dts/imx6q.dtsi                       |    6 +--
 arch/arm/mach-imx/clk-imx1.c                       |    2 +-
 arch/arm/mach-imx/clk-imx21.c                      |    2 +-
 arch/arm/mach-imx/clk-imx25.c                      |    6 +--
 arch/arm/mach-imx/clk-imx27.c                      |    4 +-
 arch/arm/mach-imx/clk-imx31.c                      |    6 +--
 arch/arm/mach-imx/clk-imx35.c                      |    6 +--
 arch/arm/mach-imx/clk-imx51-imx53.c                |    8 ++--
 arch/arm/mach-imx/devices/devices-common.h         |    1 +
 arch/arm/mach-imx/devices/platform-imx-i2c.c       |   28 +++++++-------
 arch/arm/mach-imx/imx27-dt.c                       |    4 +-
 arch/arm/mach-imx/imx51-dt.c                       |    4 +-
 arch/arm/mach-imx/mach-imx53.c                     |    6 +--
 drivers/i2c/busses/i2c-imx.c                       |   40 +++++++++++++++++---
 18 files changed, 87 insertions(+), 54 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
index f3cf43b..3614242 100644
--- a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -12,13 +12,13 @@ Optional properties:
 Examples:
 
 i2c@83fc4000 { /* I2C2 on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 	reg = <0x83fc4000 0x4000>;
 	interrupts = <63>;
 };
 
 i2c@70038000 { /* HS-I2C on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 	reg = <0x70038000 0x4000>;
 	interrupts = <64>;
 	clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 3e54f14..67d6727 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -113,7 +113,7 @@
 			i2c1: i2c@10012000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
 				reg = <0x10012000 0x1000>;
 				interrupts = <12>;
 				status = "disabled";
@@ -205,7 +205,7 @@
 			i2c2: i2c@1001d000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
 				reg = <0x1001d000 0x1000>;
 				interrupts = <1>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 2f71a91..702abcf 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -377,7 +377,7 @@
 			i2c@83fc4000 { /* I2C2 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 				reg = <0x83fc4000 0x4000>;
 				interrupts = <63>;
 				status = "disabled";
@@ -386,7 +386,7 @@
 			i2c@83fc8000 { /* I2C1 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 				reg = <0x83fc8000 0x4000>;
 				interrupts = <62>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 221cf33..ec3b8cca 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -432,7 +432,7 @@
 			i2c@53fec000 { /* I2C3 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 				reg = <0x53fec000 0x4000>;
 				interrupts = <64>;
 				status = "disabled";
@@ -488,7 +488,7 @@
 			i2c@63fc4000 { /* I2C2 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 				reg = <0x63fc4000 0x4000>;
 				interrupts = <63>;
 				status = "disabled";
@@ -497,7 +497,7 @@
 			i2c@63fc8000 { /* I2C1 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 				reg = <0x63fc8000 0x4000>;
 				interrupts = <62>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 1d07be2..bcaea64 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -816,7 +816,7 @@
 			i2c@021a0000 { /* I2C1 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <0 36 0x04>;
 				status = "disabled";
@@ -825,7 +825,7 @@
 			i2c@021a4000 { /* I2C2 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a4000 0x4000>;
 				interrupts = <0 37 0x04>;
 				status = "disabled";
@@ -834,7 +834,7 @@
 			i2c@021a8000 { /* I2C3 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a8000 0x4000>;
 				interrupts = <0 38 0x04>;
 				status = "disabled";
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index ebfffd2..1cd1c5b 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -94,7 +94,7 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
 	clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
 	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
-	clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
 	clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
 	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
 	clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index fbee6a4..09fc31c 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -166,7 +166,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma");
 	clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0");
 	clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
 	clk_register_clkdev(clk[brom_gate], "brom", NULL);
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index 9841ff9..54edac0 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -213,9 +213,9 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
 	clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
 	clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
-	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.1");
-	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
 	clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
 	clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 7b6fd13..d9aac0f 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -247,8 +247,8 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
 	clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
 	clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1");
 	clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
 	clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
 	clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0");
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index a4c298a..76e6462 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -155,9 +155,9 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
 	clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
-	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
-	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
 	clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0");
 	clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 56b14b9..e411153 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -223,9 +223,9 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
 	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
-	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
 	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 64cae86..54303a8 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -256,8 +256,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2");
 	clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
 	clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
-	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
 	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0");
@@ -343,7 +343,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 
 	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
 
-	clk_register_clkdev(clk[hsi2c_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[hsi2c_gate], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
 	clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
 	clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
@@ -433,7 +433,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
 
 	clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
-	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0");
 	clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu");
 	clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu");
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 34419b2..b0f4747 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -110,6 +110,7 @@ struct platform_device *__init imx_add_imx_fb(
 
 #include <linux/platform_data/i2c-imx.h>
 struct imx_imx_i2c_data {
+	const char *devid;
 	int id;
 	resource_size_t iobase;
 	resource_size_t iosize;
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index e0c7d62..424ce24 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -9,31 +9,32 @@
 #include <mach/hardware.h>
 #include "devices-common.h"
 
-#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)		\
+#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)	\
 	{								\
+		.devid = _devid,					\
 		.id = _id,						\
 		.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR,		\
 		.iosize = _size,					\
 		.irq = soc ## _INT_I2C ## _hwid,			\
 	}
 
-#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)
+#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size)		\
+	[_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
 
 #ifdef CONFIG_SOC_IMX1
 const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K);
+	imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX1 */
 
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
+	imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
 #define imx25_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
 	imx25_imx_i2c_data_entry(0, 1),
 	imx25_imx_i2c_data_entry(1, 2),
 	imx25_imx_i2c_data_entry(2, 3),
@@ -43,7 +44,7 @@ const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
 #define imx27_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx27_imx_i2c_data_entry(0, 1),
 	imx27_imx_i2c_data_entry(1, 2),
 };
@@ -52,7 +53,7 @@ const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX31
 const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
 #define imx31_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx31_imx_i2c_data_entry(0, 1),
 	imx31_imx_i2c_data_entry(1, 2),
 	imx31_imx_i2c_data_entry(2, 3),
@@ -62,7 +63,7 @@ const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX35
 const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
 #define imx35_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx35_imx_i2c_data_entry(0, 1),
 	imx35_imx_i2c_data_entry(1, 2),
 	imx35_imx_i2c_data_entry(2, 3),
@@ -72,7 +73,7 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX50
 const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
 #define imx50_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx50_imx_i2c_data_entry(0, 1),
 	imx50_imx_i2c_data_entry(1, 2),
 	imx50_imx_i2c_data_entry(2, 3),
@@ -82,10 +83,11 @@ const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 #define imx51_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx51_imx_i2c_data_entry(0, 1),
 	imx51_imx_i2c_data_entry(1, 2),
 	{
+		.devid = "imx21-i2c",
 		.id = 2,
 		.iobase = MX51_HSI2C_DMA_BASE_ADDR,
 		.iosize = SZ_16K,
@@ -97,7 +99,7 @@ const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX53
 const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
 #define imx53_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx53_imx_i2c_data_entry(0, 1),
 	imx53_imx_i2c_data_entry(1, 2),
 	imx53_imx_i2c_data_entry(2, 3),
@@ -120,7 +122,7 @@ struct platform_device *__init imx_add_imx_i2c(
 		},
 	};
 
-	return imx_add_platform_device("imx-i2c", data->id,
+	return imx_add_platform_device(data->devid, data->id,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata));
 }
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 83c56fb..43fbf86 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -23,8 +23,8 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL),
 	OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL),
 	OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+	OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
 	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL),
 	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL),
 	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL),
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index e105f12..a0391a1 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -37,8 +37,8 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
 	OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
 	OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+	OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
 	OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
 	OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
 	{ /* sentinel */ }
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index aaa90a7..0e0aadfb 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -43,9 +43,9 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
 	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
 	OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx21-i2c.2", NULL),
 	OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
 	OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
 	{ /* sentinel */ }
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index b7907ba7..9f75e52 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -52,8 +52,6 @@
 #include <linux/of_device.h>
 #include <linux/of_i2c.h>
 #include <linux/pinctrl/consumer.h>
-
-#include <mach/hardware.h>
 #include <linux/platform_data/i2c-imx.h>
 
 /** Defines ********************************************************************
@@ -115,6 +113,11 @@ static u16 __initdata i2c_clk_div[50][2] = {
 	{ 3072,	0x1E }, { 3840,	0x1F }
 };
 
+enum imx_i2c_type {
+	IMX1_I2C,
+	IMX21_I2C,
+};
+
 struct imx_i2c_struct {
 	struct i2c_adapter	adapter;
 	struct clk		*clk;
@@ -124,13 +127,33 @@ struct imx_i2c_struct {
 	unsigned int 		disable_delay;
 	int			stopped;
 	unsigned int		ifdr; /* IMX_I2C_IFDR */
+	enum imx_i2c_type	devtype;
+};
+
+static struct platform_device_id imx_i2c_devtype[] = {
+	{
+		.name = "imx1-i2c",
+		.driver_data = IMX1_I2C,
+	}, {
+		.name = "imx21-i2c",
+		.driver_data = IMX21_I2C,
+	}, {
+		/* sentinel */
+	}
 };
+MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
 
 static const struct of_device_id i2c_imx_dt_ids[] = {
-	{ .compatible = "fsl,imx1-i2c", },
+	{ .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], },
+	{ .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
 	{ /* sentinel */ }
 };
 
+static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
+{
+	return i2c_imx->devtype == IMX1_I2C;
+}
+
 /** Functions for IMX I2C adapter driver ***************************************
 *******************************************************************************/
 
@@ -223,7 +246,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 		temp &= ~(I2CR_MSTA | I2CR_MTX);
 		writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
 	}
-	if (cpu_is_mx1()) {
+	if (is_imx1_i2c(i2c_imx)) {
 		/*
 		 * This delay caused by an i.MXL hardware bug.
 		 * If no (or too short) delay, no "STOP" bit will be generated.
@@ -465,6 +488,8 @@ static struct i2c_algorithm i2c_imx_algo = {
 
 static int __init i2c_imx_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
+							   &pdev->dev);
 	struct imx_i2c_struct *i2c_imx;
 	struct resource *res;
 	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
@@ -497,6 +522,10 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	if (of_id)
+		pdev->id_entry = of_id->data;
+	i2c_imx->devtype = pdev->id_entry->driver_data;
+
 	/* Setup i2c_imx driver structure */
 	strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
 	i2c_imx->adapter.owner		= THIS_MODULE;
@@ -593,7 +622,8 @@ static struct platform_driver i2c_imx_driver = {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
 		.of_match_table = i2c_imx_dt_ids,
-	}
+	},
+	.id_table	= imx_i2c_devtype,
 };
 
 static int __init i2c_adap_imx_init(void)
-- 
1.7.9.5

Re: [PATCH v2 00/34] i.MX multi-platform support

[Arnd Bergmann]

On Thursday 20 September 2012, Shawn Guo wrote:
> 
> Here is the second post, which should have addressed the comments that
> reviewers put on v1.
> 
> It's available on branch below.
> 
>   git://git.linaro.org/people/shawnguo/linux-2.6.git imx/multi-platform-v2
> 
> And it's based on the following branches.
> 
>   calxeda/multi-plat
>   arm-soc/multiplatform/platform-data
>   arm-soc/multiplatform/smp_ops
>   arm-soc/imx/cleanup
>   arm-soc/imx/dt
>   sound/for-3.7
> 
> Subsystem maintainers,
> 
> I plan to send the whole series for 3.7 via arm-soc tree.  Please let
> me know if you have problem with that.  Thanks.

The first five branches are scheduled to go through the arm-soc tree, so
I'm fine with that. For the sound/for-3.7 branch, I'd like to know when
to expect that hitting mainline. If it always gets in very early during the
merge window, it's probably ok to put the imx/multi-platform patches into
the same branch as the other ones in arm-soc and wait for the sound stuff
to hit mainline first, otherwise I'd suggest we start a second
next/multiplatform-2 branch for imx and send the first part early on
but then wait with the second batch before sound gets in.

	Arnd

Re: [PATCH v2 00/34] i.MX multi-platform support

[Mark Brown]

On Thu, Sep 20, 2012 at 07:39:34AM +0000, Arnd Bergmann wrote:

> The first five branches are scheduled to go through the arm-soc tree, so
> I'm fine with that. For the sound/for-3.7 branch, I'd like to know when
> to expect that hitting mainline. If it always gets in very early during the
> merge window, it's probably ok to put the imx/multi-platform patches into
> the same branch as the other ones in arm-soc and wait for the sound stuff
> to hit mainline first, otherwise I'd suggest we start a second
> next/multiplatform-2 branch for imx and send the first part early on
> but then wait with the second batch before sound gets in.

It's usually pretty early but Takashi will be on holiday this time so
I'm not sure if things might be different (he was going to send the pull
request from holiday).  I also didn't guarantee that it'll be stable
yet, can someone please tell me what the depenency is here?

Re: [PATCH v2 00/34] i.MX multi-platform support

[Shawn Guo]

On Thu, Sep 20, 2012 at 07:41:50AM -0400, Mark Brown wrote:
> It's usually pretty early but Takashi will be on holiday this time so
> I'm not sure if things might be different (he was going to send the pull
> request from holiday).  I also didn't guarantee that it'll be stable
> yet, can someone please tell me what the depenency is here?

We need the patch to have all imx drivers mach/* inclusion free,
so that we can enable multi-platform support for imx, which is the
whole point of the series.

If your for-3.7 is not stable anyway, I guess the easiest the way
to do it might be you drop the patch "ASoC: mx27vis: retrieve gpio
numbers from platform_data" from your tree and I have it be part of
the series to go via arm-soc tree as a whole.  (This is the original
plan that I mentioned in v1 cover letter)

Shawn

Re: [PATCH v2 00/34] i.MX multi-platform support

[Mark Brown]

On Thu, Sep 20, 2012 at 07:52:15PM +0800, Shawn Guo wrote:
> On Thu, Sep 20, 2012 at 07:41:50AM -0400, Mark Brown wrote:

> > It's usually pretty early but Takashi will be on holiday this time so
> > I'm not sure if things might be different (he was going to send the pull
> > request from holiday).  I also didn't guarantee that it'll be stable
> > yet, can someone please tell me what the depenency is here?

> We need the patch to have all imx drivers mach/* inclusion free,
> so that we can enable multi-platform support for imx, which is the
> whole point of the series.

That doesn't answer the question.  What is the dependency - what is it
about this patch that something else depends on?  Your cover letters
just say you'd like to do this but don't mention dependencies at all and
when I asked the question last night you said the same thing.  I've not
seen the rest of the series...

> If your for-3.7 is not stable anyway, I guess the easiest the way

It probably *is* stable but I'm not enthused about people pulling
unsigned tags.  I might rebase, though - I'm going to finalise the tree
in the next few days.

> to do it might be you drop the patch "ASoC: mx27vis: retrieve gpio
> numbers from platform_data" from your tree and I have it be part of
> the series to go via arm-soc tree as a whole.  (This is the original
> plan that I mentioned in v1 cover letter)

You just mentioned it as a preference (you said it's something you'd
like to do), please if you're doing this sort of cross tree thing be
explicit about what the inter-tree relationships are.  If things need to
go in via the same tree say so explicitly (and ideally say way this is).

The main reason I applied it straight away was that Javier mentioned
that it was a bug fix and it's near the merge window and these random
ARM cleanup serieses never seem to go in quickly.

Re: [PATCH v2 00/34] i.MX multi-platform support

[Shawn Guo]

On Thu, Sep 20, 2012 at 08:47:10AM -0400, Mark Brown wrote:
> On Thu, Sep 20, 2012 at 07:52:15PM +0800, Shawn Guo wrote:
> > On Thu, Sep 20, 2012 at 07:41:50AM -0400, Mark Brown wrote:
> 
> > > It's usually pretty early but Takashi will be on holiday this time so
> > > I'm not sure if things might be different (he was going to send the pull
> > > request from holiday).  I also didn't guarantee that it'll be stable
> > > yet, can someone please tell me what the depenency is here?
> 
> > We need the patch to have all imx drivers mach/* inclusion free,
> > so that we can enable multi-platform support for imx, which is the
> > whole point of the series.
> 
> That doesn't answer the question.  What is the dependency - what is it
> about this patch that something else depends on?  Your cover letters
> just say you'd like to do this but don't mention dependencies at all and
> when I asked the question last night you said the same thing.  I've not
> seen the rest of the series...
> 
Ah, right.  You did get copied on the whole series.  So the whole point
of patch "ASoC: mx27vis: retrieve gpio numbers from platform_data" is
to get rid of inclusion mach/iomux-mx27.h.  This has to be done before
we enable multi-platform support for imx, since mach/* has to be removed
completely for multi-platform build.

> > If your for-3.7 is not stable anyway, I guess the easiest the way
> 
> It probably *is* stable but I'm not enthused about people pulling
> unsigned tags.  I might rebase, though - I'm going to finalise the tree
> in the next few days.
> 
> > to do it might be you drop the patch "ASoC: mx27vis: retrieve gpio
> > numbers from platform_data" from your tree and I have it be part of
> > the series to go via arm-soc tree as a whole.  (This is the original
> > plan that I mentioned in v1 cover letter)
> 
> You just mentioned it as a preference (you said it's something you'd
> like to do), please if you're doing this sort of cross tree thing be
> explicit about what the inter-tree relationships are.  If things need to
> go in via the same tree say so explicitly (and ideally say way this is).
> 
Ok, my bad.

> The main reason I applied it straight away was that Javier mentioned
> that it was a bug fix and it's near the merge window and these random
> ARM cleanup serieses never seem to go in quickly.

The series is planned for 3.7 merge window.  Is it still possible for
you to drop the patch from your tree to ease the process?  Or I will
hold my pull-request to arm-soc until you tell me you have your tree
finalized.

Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 00/34] i.MX multi-platform support

[Shawn Guo]

On Thu, Sep 20, 2012 at 07:39:34AM +0000, Arnd Bergmann wrote:
> The first five branches are scheduled to go through the arm-soc tree, so
> I'm fine with that. For the sound/for-3.7 branch, I'd like to know when
> to expect that hitting mainline. If it always gets in very early during the
> merge window, it's probably ok to put the imx/multi-platform patches into
> the same branch as the other ones in arm-soc and wait for the sound stuff
> to hit mainline first, otherwise I'd suggest we start a second
> next/multiplatform-2 branch for imx and send the first part early on
> but then wait with the second batch before sound gets in.
> 
It seems that we will have to go with next/multiplatform-2.  I just
tried to merge the series with linux-next together, and got some
non-trivial conflicts with media and mtd tree.  I might have to rebase
my series on top of these trees to sort out those conflicts.  That said,
I will have several dependencies outside arm-soc tree, and have to pend
my series until all those trees get merged into mainline.

Shawn

Re: [PATCH v2 00/34] i.MX multi-platform support

[Arnd Bergmann]

On Thursday 20 September 2012, Shawn Guo wrote:
> 
> On Thu, Sep 20, 2012 at 07:39:34AM +0000, Arnd Bergmann wrote:
> > The first five branches are scheduled to go through the arm-soc tree, so
> > I'm fine with that. For the sound/for-3.7 branch, I'd like to know when
> > to expect that hitting mainline. If it always gets in very early during the
> > merge window, it's probably ok to put the imx/multi-platform patches into
> > the same branch as the other ones in arm-soc and wait for the sound stuff
> > to hit mainline first, otherwise I'd suggest we start a second
> > next/multiplatform-2 branch for imx and send the first part early on
> > but then wait with the second batch before sound gets in.
> > 
> It seems that we will have to go with next/multiplatform-2.  I just
> tried to merge the series with linux-next together, and got some
> non-trivial conflicts with media and mtd tree.  I might have to rebase
> my series on top of these trees to sort out those conflicts.  That said,
> I will have several dependencies outside arm-soc tree, and have to pend
> my series until all those trees get merged into mainline.

Ok, fair enough. I think we can put it in arm-soc/for-next as a staging
branch anyway to give it some exposure to linux-next, and then we can
decide whether a rebase is necessary before sending it to Linus.

	Arnd

Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support

[Shawn Guo]

On Thu, Sep 20, 2012 at 03:56:56PM +0000, Arnd Bergmann wrote:
> Ok, fair enough. I think we can put it in arm-soc/for-next as a staging
> branch anyway to give it some exposure to linux-next, and then we can
> decide whether a rebase is necessary before sending it to Linus.
> 
I just saw the announcement from Olof - no more major merge for 3.7
will be accepted from now on.  Can this be an exception or should I
plan this for 3.8?

Shawn

Re: [PATCH v2 00/34] i.MX multi-platform support

[Olof Johansson]

On Fri, Sep 21, 2012 at 1:01 AM, Shawn Guo <shawn.guo@linaro.org> wrote:
> On Thu, Sep 20, 2012 at 03:56:56PM +0000, Arnd Bergmann wrote:
>> Ok, fair enough. I think we can put it in arm-soc/for-next as a staging
>> branch anyway to give it some exposure to linux-next, and then we can
>> decide whether a rebase is necessary before sending it to Linus.
>>
> I just saw the announcement from Olof - no more major merge for 3.7
> will be accepted from now on.  Can this be an exception or should I
> plan this for 3.8?


I'll take a look at merging it tomorrow after I've dealt with smp_ops;
if it looks reasonably conflict-free I'll pull it in. We need the
sound dependency sorted out (or agreed upon) first though.


-Olof

Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support

[Shawn Guo]

Hi Olof,

On Fri, Sep 21, 2012 at 01:26:43AM -0700, Olof Johansson wrote:
> I'll take a look at merging it tomorrow after I've dealt with smp_ops;
> if it looks reasonably conflict-free I'll pull it in. We need the
> sound dependency sorted out (or agreed upon) first though.
> 
I just published the branch below with this series rebased on top of
the necessary dependant branches.

  git://git.linaro.org/people/shawnguo/linux-2.6.git staging/imx-multiplatform

The dependant branches include:

* arm-soc/multiplatform/platform-data

* arm-soc/multiplatform/smp_ops

* git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7

  It contains dependant patch "ASoC: mx27vis: retrieve gpio numbers
  from platform_data"

* git://git.infradead.org/mtd-2.6.git master

  The series is based on this tree to solve some non-trivial conflicts
  on mxc_nand driver.  Because mtd tree completely missed 3.6 merge
  window, having the series base on 3.6-rc actually means 3.5 code base
  in term of mtd support.  There are currently two cycles changes
  accumulated on mtd, and we need to base the series on it to sort out
  the conflicts.

* git://linuxtv.org/mchehab/media-next.git master

  The media tree renames mx2/mx3 camera drivers twice.  I'm not sure
  if git merge can detect them, so I just rebased the series on media
  tree to solve that.  The bonus point is that a number of trivial
  conflicts with imx27-coda support on media tree gets solved as well.

I'm not requesting you to pull the branch into arm-soc as a stable
branch but staging one, because the external dependencies which might
not be stable.  I attempt to use it for exposing the series on
linux-next, so that we can send it to Linus for 3.7 if there is chance
for us to (e.g. all the dependant branches hit mainline early during
3.7 merge window).

Shawn

Re: [PATCH v2 00/34] i.MX multi-platform support

[Shawn Guo]

On Sat, Sep 22, 2012 at 12:46:26AM +0800, Shawn Guo wrote:
> I just published the branch below with this series rebased on top of
> the necessary dependant branches.
> 
>   git://git.linaro.org/people/shawnguo/linux-2.6.git staging/imx-multiplatform
> 
> The dependant branches include:
> 

Forgot the base:

  * arm-soc/next/multiplatform

Shawn

> * arm-soc/multiplatform/platform-data
> 
> * arm-soc/multiplatform/smp_ops
> 
> * git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7
> 
>   It contains dependant patch "ASoC: mx27vis: retrieve gpio numbers
>   from platform_data"
> 
> * git://git.infradead.org/mtd-2.6.git master
> 
>   The series is based on this tree to solve some non-trivial conflicts
>   on mxc_nand driver.  Because mtd tree completely missed 3.6 merge
>   window, having the series base on 3.6-rc actually means 3.5 code base
>   in term of mtd support.  There are currently two cycles changes
>   accumulated on mtd, and we need to base the series on it to sort out
>   the conflicts.
> 
> * git://linuxtv.org/mchehab/media-next.git master
> 
>   The media tree renames mx2/mx3 camera drivers twice.  I'm not sure
>   if git merge can detect them, so I just rebased the series on media
>   tree to solve that.  The bonus point is that a number of trivial
>   conflicts with imx27-coda support on media tree gets solved as well.
> 
> I'm not requesting you to pull the branch into arm-soc as a stable
> branch but staging one, because the external dependencies which might
> not be stable.  I attempt to use it for exposing the series on
> linux-next, so that we can send it to Linus for 3.7 if there is chance
> for us to (e.g. all the dependant branches hit mainline early during
> 3.7 merge window).

Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support

[Olof Johansson]

Hi,

On Fri, Sep 21, 2012 at 9:53 AM, Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> On Sat, Sep 22, 2012 at 12:46:26AM +0800, Shawn Guo wrote:
>> I just published the branch below with this series rebased on top of
>> the necessary dependant branches.
>>
>>   git://git.linaro.org/people/shawnguo/linux-2.6.git staging/imx-multiplatform
>>
>> The dependant branches include:
>>
>
> Forgot the base:
>
>   * arm-soc/next/multiplatform
>
> Shawn
>
>> * arm-soc/multiplatform/platform-data
>>
>> * arm-soc/multiplatform/smp_ops
>>
>> * git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7
>>
>>   It contains dependant patch "ASoC: mx27vis: retrieve gpio numbers
>>   from platform_data"
>>
>> * git://git.infradead.org/mtd-2.6.git master
>>
>>   The series is based on this tree to solve some non-trivial conflicts
>>   on mxc_nand driver.  Because mtd tree completely missed 3.6 merge
>>   window, having the series base on 3.6-rc actually means 3.5 code base
>>   in term of mtd support.  There are currently two cycles changes
>>   accumulated on mtd, and we need to base the series on it to sort out
>>   the conflicts.
>>
>> * git://linuxtv.org/mchehab/media-next.git master
>>
>>   The media tree renames mx2/mx3 camera drivers twice.  I'm not sure
>>   if git merge can detect them, so I just rebased the series on media
>>   tree to solve that.  The bonus point is that a number of trivial
>>   conflicts with imx27-coda support on media tree gets solved as well.
>>
>> I'm not requesting you to pull the branch into arm-soc as a stable
>> branch but staging one, because the external dependencies which might
>> not be stable.  I attempt to use it for exposing the series on
>> linux-next, so that we can send it to Linus for 3.7 if there is chance
>> for us to (e.g. all the dependant branches hit mainline early during
>> 3.7 merge window).

I've pulled this in now as staging/imx-multiplatform.

As you mention, it might or might not make sense to send this up. It
also accrued a few more merge conflicts with other branches in
arm-soc, so we'll see how things play out.

Either way, we'll for sure queue it for 3.8.


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 00/34] i.MX multi-platform support

[Olof Johansson]

On Sat, Sep 22, 2012 at 12:41 AM, Olof Johansson <olof@lixom.net> wrote:
> Hi,
>
> On Fri, Sep 21, 2012 at 9:53 AM, Shawn Guo <shawn.guo@linaro.org> wrote:
>> On Sat, Sep 22, 2012 at 12:46:26AM +0800, Shawn Guo wrote:
>>> I just published the branch below with this series rebased on top of
>>> the necessary dependant branches.
>>>
>>>   git://git.linaro.org/people/shawnguo/linux-2.6.git staging/imx-multiplatform
>>>
>>> The dependant branches include:
>>>
>>
>> Forgot the base:
>>
>>   * arm-soc/next/multiplatform
>>
>> Shawn
>>
>>> * arm-soc/multiplatform/platform-data
>>>
>>> * arm-soc/multiplatform/smp_ops
>>>
>>> * git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7
>>>
>>>   It contains dependant patch "ASoC: mx27vis: retrieve gpio numbers
>>>   from platform_data"
>>>
>>> * git://git.infradead.org/mtd-2.6.git master
>>>
>>>   The series is based on this tree to solve some non-trivial conflicts
>>>   on mxc_nand driver.  Because mtd tree completely missed 3.6 merge
>>>   window, having the series base on 3.6-rc actually means 3.5 code base
>>>   in term of mtd support.  There are currently two cycles changes
>>>   accumulated on mtd, and we need to base the series on it to sort out
>>>   the conflicts.
>>>
>>> * git://linuxtv.org/mchehab/media-next.git master
>>>
>>>   The media tree renames mx2/mx3 camera drivers twice.  I'm not sure
>>>   if git merge can detect them, so I just rebased the series on media
>>>   tree to solve that.  The bonus point is that a number of trivial
>>>   conflicts with imx27-coda support on media tree gets solved as well.
>>>
>>> I'm not requesting you to pull the branch into arm-soc as a stable
>>> branch but staging one, because the external dependencies which might
>>> not be stable.  I attempt to use it for exposing the series on
>>> linux-next, so that we can send it to Linus for 3.7 if there is chance
>>> for us to (e.g. all the dependant branches hit mainline early during
>>> 3.7 merge window).
>
> I've pulled this in now as staging/imx-multiplatform.
>
> As you mention, it might or might not make sense to send this up. It
> also accrued a few more merge conflicts with other branches in
> arm-soc, so we'll see how things play out.
>
> Either way, we'll for sure queue it for 3.8.

Hmm. Pulling it in gives me a few new build errors, in particular on
the configs that Russell use to build test omap3, as well as one of
his vexpress configs. So I dropped it again for now.

Let's have the current contents sit in linux-next for at least one
release before we bring in anything more, especially since it brings
in dependencies on external trees, and it also has a handful of new
merge conflicts. We're already exposing Stephen Rothwell to more merge
conflicts than I'm entirely comfortable with.


-Olof

Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support

[Shawn Guo]

On Sat, Sep 22, 2012 at 01:09:27AM -0700, Olof Johansson wrote:
> > I've pulled this in now as staging/imx-multiplatform.
> >
> > As you mention, it might or might not make sense to send this up. It
> > also accrued a few more merge conflicts with other branches in
> > arm-soc, so we'll see how things play out.
> >
> > Either way, we'll for sure queue it for 3.8.
> 
> Hmm. Pulling it in gives me a few new build errors, in particular on
> the configs that Russell use to build test omap3, as well as one of
> his vexpress configs. So I dropped it again for now.
> 
> Let's have the current contents sit in linux-next for at least one
> release before we bring in anything more, especially since it brings
> in dependencies on external trees, and it also has a handful of new
> merge conflicts. We're already exposing Stephen Rothwell to more merge
> conflicts than I'm entirely comfortable with.
> 
Ok.  I will rebase the series against 3.7-rc1 and then send you then.

Shawn

Re: [PATCH v2 00/34] i.MX multi-platform support

[Mark Brown]

On Fri, Sep 21, 2012 at 01:26:43AM -0700, Olof Johansson wrote:

> I'll take a look at merging it tomorrow after I've dealt with smp_ops;
> if it looks reasonably conflict-free I'll pull it in. We need the
> sound dependency sorted out (or agreed upon) first though.

I guess in the light of the rest of the thread it doesn't much matter
for this merge window but I just pushed:

 git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-3.7

which is signed so can happily be merged elsewhere.