[PATCH v2 5/6] Misc: display unsigned hex

["Amaury Decrême" <amaury.decreme-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

This patch corrects the display of unsigned hex values.

Signed-off-by: Amaury Decrême <amaury.decreme-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/i2c/busses/i2c-sis630.c |   25 ++++++++++++++-----------
 1 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 792bb79..4bc970d 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -152,18 +152,18 @@ static inline void sis630_write(u8 reg, u8 data)
 
 static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldclock)
 {
-        int temp;
+	u8 temp;
 
 	/* Make sure the SMBus host is ready to start transmitting. */
 	temp = sis630_read(SMB_CNT);
 	if ((temp & (SMB_PROBE | SMB_HOSTBUSY)) != 0x00) {
-		dev_dbg(&adap->dev, "SMBus busy (%02x). Resetting...\n", temp);
+		dev_dbg(&adap->dev, "SMBus busy (%02hx). Resetting...\n", temp);
 		/* kill smbus transaction */
 		sis630_write(SMBHOST_CNT, SMB_KILL);
 
 		temp = sis630_read(SMB_CNT);
 		if (temp & (SMB_PROBE | SMB_HOSTBUSY)) {
-			dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
+			dev_dbg(&adap->dev, "Failed! (%02hx)\n", temp);
 			return -EBUSY;
                 } else {
 			dev_dbg(&adap->dev, "Successful!\n");
@@ -173,7 +173,7 @@ static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldc
 	/* save old clock, so we can prevent machine for hung */
 	*oldclock = sis630_read(SMB_CNT);
 
-	dev_dbg(&adap->dev, "saved clock 0x%02x\n", *oldclock);
+	dev_dbg(&adap->dev, "saved clock 0x%02hx\n", *oldclock);
 
 	/* disable timeout interrupt , set Host Master Clock to 56KHz if requested */
 	if (high_clock)
@@ -193,7 +193,8 @@ static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldc
 
 static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
 {
-	int temp, result = 0, timeout = 0;
+	u8 temp;
+	int result = 0, timeout = 0;
 
 	/* We will always wait for a fraction of a second! */
 	do {
@@ -228,7 +229,8 @@ static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock)
 	/* clear all status "sticky" bits */
 	sis630_write(SMB_STS, 0xFF);
 
-	dev_dbg(&adap->dev, "SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT));
+	dev_dbg(&adap->dev, "SMB_CNT before clock restore 0x%02hx\n",
+		sis630_read(SMB_CNT));
 
 	/*
 	 * restore old Host Master Clock if high_clock is set
@@ -237,7 +239,8 @@ static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock)
 	if (high_clock && !(oldclock & SMBCLK_SEL))
 		sis630_write(SMB_CNT, sis630_read(SMB_CNT) & ~SMBCLK_SEL);
 
-	dev_dbg(&adap->dev, "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT));
+	dev_dbg(&adap->dev, "SMB_CNT after clock restore 0x%02hx\n",
+		sis630_read(SMB_CNT));
 }
 
 static int sis630_transaction(struct i2c_adapter *adap, int size)
@@ -266,8 +269,8 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
 		else if (len > 32)
 			len = 32;
 		sis630_write(SMB_COUNT, len);
-		for (i=1; i <= len; i++) {
-			dev_dbg(&adap->dev, "set data 0x%02x\n", data->block[i]);
+		for (i = 1; i <= len; i++) {
+			dev_dbg(&adap->dev, "set data 0x%02hx\n", data->block[i]);
 			/* set data */
 			sis630_write(SMB_BYTE+(i-1)%8, data->block[i]);
 			if (i==8 || (len<8 && i==len)) {
@@ -319,7 +322,7 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
 			if (data->block[0] > 32)
 				data->block[0] = 32;
 
-			dev_dbg(&adap->dev, "block data read len=0x%x\n", data->block[0]);
+			dev_dbg(&adap->dev, "block data read len=0x%hx\n", data->block[0]);
 
 			for (i=0; i < 8 && len < data->block[0]; i++,len++) {
 				dev_dbg(&adap->dev, "read i=%d len=%d\n", i, len);
@@ -463,7 +466,7 @@ static int sis630_setup(struct pci_dev *sis630_dev)
 		goto exit;
 	}
 
-	dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
+	dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04hx\n", acpi_base);
 
 	if (supported[i] == PCI_DEVICE_ID_SI_760)
 		smbus_base = acpi_base + 0xE0;
-- 
1.7.8.6