From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mika Westerberg Subject: [PATCH 0/4] i2c-designware: add Intel Lynxpoint support Date: Thu, 17 Jan 2013 12:31:03 +0200 Message-ID: <1358418667-4533-1-git-send-email-mika.westerberg@linux.intel.com> Return-path: Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Wolfram Sang , "Ben Dooks (embedded platforms)" , Jean Delvare , Mika Westerberg , dirk.brandewie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-i2c@vger.kernel.org Hi all, This series adds support for the Intel Lynxpoint Low Power Subsystem I2C controllers. They are compatible with the DesignWare I2C controller. Patches [1/4] and [2/4] are fixes that are necessary to get the driver working on Lynxpoint. Patch [3/4] brings minimal runtime PM support for the designware platform driver. This is useful if the PM subsystem/domain implements runtime PM, like in case of ACPI. Patch [4/4] finally implements ACPI enumeration support for the designware platform driver and adds Lynxpoint ACPI IDs. Please review. Mika Westerberg (4): i2c-designware: add missing MODULE_LICENSE i2c-designware: always set the STOP bit after last byte i2c-designware: add minimal support for runtime PM i2c-designware: add support for Intel Lynxpoint drivers/i2c/busses/i2c-designware-core.c | 20 ++++++++- drivers/i2c/busses/i2c-designware-platdrv.c | 59 +++++++++++++++++++++++++-- 2 files changed, 74 insertions(+), 5 deletions(-) -- 1.7.10.4