From: Libo Chen <libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org
Cc: guz.fnst-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org,
sonic.zhang-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org,
uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
lizefan-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org
Subject: [PATCH RFC v3 1/3] i2c: i2c-bfin-twi: convert to devm_* API
Date: Thu, 23 May 2013 20:00:05 +0800 [thread overview]
Message-ID: <1369310405-21112-1-git-send-email-libo.chen@huawei.com> (raw)
peripheral_request_list has got free if any one faild, so no need to free again in err case.
aovid this, convert them to devm_* API
Signed-off-by: Libo Chen <libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/i2c/busses/i2c-bfin-twi.c | 38 +++++++++---------------------------
1 files changed, 10 insertions(+), 28 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 05080c4..2b99c48 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -621,35 +621,27 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
int rc;
unsigned int clkhilow;
- iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL);
+ iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
+ GFP_KERNEL);
if (!iface) {
dev_err(&pdev->dev, "Cannot allocate memory\n");
- rc = -ENOMEM;
- goto out_error_nomem;
+ return -ENOMEM;
}
spin_lock_init(&(iface->lock));
/* Find and map our resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
- rc = -ENOENT;
- goto out_error_get_res;
- }
-
- iface->regs_base = ioremap(res->start, resource_size(res));
- if (iface->regs_base == NULL) {
+ iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(iface->regs_base)) {
dev_err(&pdev->dev, "Cannot map IO\n");
- rc = -ENXIO;
- goto out_error_ioremap;
+ return -ENXIO;
}
iface->irq = platform_get_irq(pdev, 0);
if (iface->irq < 0) {
dev_err(&pdev->dev, "No IRQ specified\n");
- rc = -ENOENT;
- goto out_error_no_irq;
+ return -ENOENT;
}
p_adap = &iface->adap;
@@ -666,10 +658,10 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
"i2c-bfin-twi");
if (rc) {
dev_err(&pdev->dev, "Can't setup pin mux!\n");
- goto out_error_pin_mux;
+ return rc;
}
- rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
+ rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
0, pdev->name, iface);
if (rc) {
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
@@ -707,16 +699,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
return 0;
out_error_add_adapter:
- free_irq(iface->irq, iface);
out_error_req_irq:
-out_error_no_irq:
peripheral_free_list((unsigned short *)pdev->dev.platform_data);
-out_error_pin_mux:
- iounmap(iface->regs_base);
-out_error_ioremap:
-out_error_get_res:
- kfree(iface);
-out_error_nomem:
+
return rc;
}
@@ -725,10 +710,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
i2c_del_adapter(&(iface->adap));
- free_irq(iface->irq, iface);
peripheral_free_list((unsigned short *)pdev->dev.platform_data);
- iounmap(iface->regs_base);
- kfree(iface);
return 0;
}
--
1.7.1
next reply other threads:[~2013-05-23 12:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-23 12:00 Libo Chen [this message]
[not found] ` <1369310405-21112-1-git-send-email-libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2013-05-24 2:49 ` [PATCH RFC v3 1/3] i2c: i2c-bfin-twi: convert to devm_* API Zhang, Sonic
[not found] ` <B168F8A49F4BCF4C84FD23DA5F6363EE010634-Nxh9ahLCS6GuVPpjEGsWsTcYPEmu4y7e@public.gmane.org>
2013-05-24 3:09 ` Libo Chen
2013-05-24 3:19 ` Sachin Kamat
[not found] ` <CAK9yfHx7ifnWjKCVc0Oju-28PdosF81OpVC5S5Vdj6hDSnfQfw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-05-28 6:42 ` Libo Chen
[not found] ` <51A451CE.8070801-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2013-06-12 9:55 ` Wolfram Sang
2013-05-24 4:32 ` Zhang, Sonic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369310405-21112-1-git-send-email-libo.chen@huawei.com \
--to=libo.chen-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=guz.fnst-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lizefan-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=sonic.zhang-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org \
--cc=uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).