From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Subject: [PATCHv3 6/6] ARM: sun4i: cubieboard: Enable the i2c controllers Date: Mon, 27 May 2013 12:00:43 +0200 Message-ID: <1369648843-1640-7-git-send-email-maxime.ripard@free-electrons.com> References: <1369648843-1640-1-git-send-email-maxime.ripard@free-electrons.com> Reply-To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <1369648843-1640-1-git-send-email-maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> List-Post: , List-Help: , List-Archive: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Subscribe: , List-Unsubscribe: , To: Wolfram Sang Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Emilio Lopez , kevin-0TFLnhJekD6UEPyfVivIlAC/G2K4zDHf@public.gmane.org, sunny-0TFLnhJekD6UEPyfVivIlAC/G2K4zDHf@public.gmane.org, shuge-0TFLnhJekD6UEPyfVivIlAC/G2K4zDHf@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Maxime Ripard List-Id: linux-i2c@vger.kernel.org From: Emilio L=F3pez The Cubieboard makes use of the first two i2c controllers found on the Allwinner A10; i2c-0 is used internally for the PMIC, while i2c-1 is exposed on the board headers. This patch enables them in the device tree. Signed-off-by: Emilio L=F3pez Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts= /sun4i-a10-cubieboard.dts index b70fe0d..0e22a28 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -41,6 +41,18 @@ pinctrl-0 =3D <&uart0_pins_a>; status =3D "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names =3D "default"; + pinctrl-0 =3D <&i2c0_pins_a>; + status =3D "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names =3D "default"; + pinctrl-0 =3D <&i2c1_pins_a>; + status =3D "okay"; + }; }; =20 leds { --=20 1.8.2.3 --=20 You received this message because you are subscribed to the Google Groups "= linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an e= mail to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/groups/opt_out.