From: Fabio Estevam <festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org
Cc: marex-ynQEQJNshbs@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Fabio Estevam
<fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Subject: [PATCH v2] i2c: i2c-mxs: Check the return value from stmp_reset_block()
Date: Wed, 10 Jul 2013 22:19:28 -0300 [thread overview]
Message-ID: <1373505568-21477-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
stmp_reset_block() may fail, so let's check its return value and propagate it in
the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
Changes since v1:
- Check the return value of all occurences of mxs_i2c_reset()
drivers/i2c/busses/i2c-mxs.c | 26 +++++++++++++++++++-------
1 file changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index df8ff5a..90c052e 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -123,9 +123,11 @@ struct mxs_i2c_dev {
bool dma_read;
};
-static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
+static int mxs_i2c_reset(struct mxs_i2c_dev *i2c)
{
- stmp_reset_block(i2c->regs);
+ int ret = stmp_reset_block(i2c->regs);
+ if (ret)
+ return ret;
/*
* Configure timing for the I2C block. The I2C TIMING2 register has to
@@ -139,6 +141,8 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
writel(0x00300030, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
+
+ return 0;
}
static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
@@ -475,7 +479,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
int stop)
{
struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
- int ret;
+ int ret, err;
int flags;
flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
@@ -495,8 +499,11 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
i2c->cmd_err = 0;
if (msg->len < 8) {
ret = mxs_i2c_pio_setup_xfer(adap, msg, flags);
- if (ret)
- mxs_i2c_reset(i2c);
+ if (ret) {
+ err = mxs_i2c_reset(i2c);
+ if (err)
+ return err;
+ }
} else {
INIT_COMPLETION(i2c->cmd_complete);
ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
@@ -527,7 +534,10 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
timeout:
dev_dbg(i2c->dev, "Timeout!\n");
mxs_i2c_dma_finish(i2c);
- mxs_i2c_reset(i2c);
+ ret = mxs_i2c_reset(i2c);
+ if (ret)
+ return ret;
+
return -ETIMEDOUT;
}
@@ -683,7 +693,9 @@ static int mxs_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c);
/* Do reset to enforce correct startup after pinmuxing */
- mxs_i2c_reset(i2c);
+ err = mxs_i2c_reset(i2c);
+ if (err)
+ return err;
adap = &i2c->adapter;
strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
--
1.8.1.2
next reply other threads:[~2013-07-11 1:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-11 1:19 Fabio Estevam [this message]
[not found] ` <1373505568-21477-1-git-send-email-festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-07-11 2:27 ` [PATCH v2] i2c: i2c-mxs: Check the return value from stmp_reset_block() Marek Vasut
2013-08-15 10:00 ` Wolfram Sang
2013-08-15 21:31 ` Marek Vasut
[not found] ` <201308152331.23742.marex-ynQEQJNshbs@public.gmane.org>
2013-08-16 16:13 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373505568-21477-1-git-send-email-festevam@gmail.com \
--to=festevam-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).