linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Ralston <james.d.ralston@intel.com>
To: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Seth Heasley <seth.heasley@intel.com>,
	James Ralston <james.d.ralston@intel.com>
Subject: [PATCH 3/4] i2c-i801: Add Device IDs for Intel Wildcat Point-LP PCH
Date: Mon,  4 Nov 2013 09:29:48 -0800	[thread overview]
Message-ID: <1383586188-4717-1-git-send-email-james.d.ralston@intel.com> (raw)

This patch adds the SMBus Device IDs for the Intel Wildcat Point-LP PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 3 +++
 3 files changed, 5 insertions(+)

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index d29dea0..7b0dcdb 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -25,6 +25,7 @@ Supported adapters:
   * Intel Avoton (SOC)
   * Intel Wellsburg (PCH)
   * Intel Coleto Creek (PCH)
+  * Intel Wildcat Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index cdcbd83..a83ef0f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -109,6 +109,7 @@ config I2C_I801
 	    Avoton (SOC)
 	    Wellsburg (PCH)
 	    Coleto Creek (PCH)
+	    Wildcat Point-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4296d17..737e298 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -59,6 +59,7 @@
   Wellsburg (PCH) MS    0x8d7e     32     hard     yes     yes     yes
   Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
   Coleto Creek (PCH)    0x23b0     32     hard     yes     yes     yes
+  Wildcat Point-LP (PCH)   0x9ca2     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -177,6 +178,7 @@
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1	0x8d7e
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2	0x8d7f
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -819,6 +821,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 	{ 0, }
 };
 
-- 
1.8.3.1


             reply	other threads:[~2013-11-04 17:29 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-04 17:29 James Ralston [this message]
2013-11-14 17:29 ` [PATCH 3/4] i2c-i801: Add Device IDs for Intel Wildcat Point-LP PCH Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1383586188-4717-1-git-send-email-james.d.ralston@intel.com \
    --to=james.d.ralston@intel.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=seth.heasley@intel.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).