From: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, hs@denx.de
Cc: khali@linux-fr.org, ben-linux@fluff.org, naveenkrishna.ch@gmail.com
Subject: [PATCH 1/2] i2c: exynos5: add support for HSI2C on Exynos5260 SoC
Date: Fri, 22 Nov 2013 11:42:06 +0530 [thread overview]
Message-ID: <1385100726-32165-1-git-send-email-ch.naveen@samsung.com> (raw)
This patch adds new compatible to support HSI2C module on Exynos5260
HSI2C module on Exynos5260 needs to be reset during during initialization.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
---
.../devicetree/bindings/i2c/i2c-exynos5.txt | 6 +++-
drivers/i2c/busses/i2c-exynos5.c | 31 ++++++++++++++++++--
2 files changed, 34 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
index 056732c..704ab92 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
@@ -5,7 +5,11 @@ at various speeds ranging from 100khz to 3.4Mhz.
Required properties:
- compatible: value should be.
- -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.
+ -> "samsung,exynos5-hsi2c", for i2c compatible with HSI2C available on
+ Exynos5250/5420 SoCs.
+ -> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
+ on Exynos5260 SoCs.
+
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index aca3991..cbb49e2 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -184,14 +184,35 @@ struct exynos5_i2c {
* 2. Fast speed upto 1Mbps
*/
int speed_mode;
+
+ /* Version of HS-I2C Hardware */
+ unsigned int version;
+};
+
+enum hsi2c_version {
+ EXYNOS_5,
+ EXYNOS_5260
};
static const struct of_device_id exynos5_i2c_match[] = {
- { .compatible = "samsung,exynos5-hsi2c" },
+ {
+ .compatible = "samsung,exynos5-hsi2c",
+ .data = (void *)EXYNOS_5 },
+ {
+ .compatible = "samsung,exynos5260-hsi2c",
+ .data = (void *)EXYNOS_5260 },
{},
};
MODULE_DEVICE_TABLE(of, exynos5_i2c_match);
+static inline unsigned int exynos5_i2c_get_version(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+
+ match = of_match_node(exynos5_i2c_match, pdev->dev.of_node);
+ return (unsigned int)match->data;
+}
+
static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
{
writel(readl(i2c->regs + HSI2C_INT_STATUS),
@@ -692,7 +713,13 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
if (ret)
goto err_clk;
- exynos5_i2c_init(i2c);
+ i2c->version = exynos5_i2c_get_version(pdev);
+
+ /* The HS-I2C core on Exynos5260 needs a reset to start with */
+ if (i2c->version == EXYNOS_5260)
+ exynos5_i2c_reset(i2c);
+ else
+ exynos5_i2c_init(i2c);
ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
--
1.7.10.4
next reply other threads:[~2013-11-22 6:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-22 6:12 Naveen Krishna Chatradhi [this message]
2013-11-22 6:46 ` [PATCH 1/2] i2c: exynos5: add support for HSI2C on Exynos5260 SoC Yuvaraj Cd
2013-11-22 7:32 ` Naveen Krishna Ch
2013-11-26 4:26 ` [PATCH 1/2 v2] " Naveen Krishna Chatradhi
[not found] ` <1385439977-19077-1-git-send-email-ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-11-26 11:29 ` Sachin Kamat
2013-11-26 11:53 ` Naveen Krishna Ch
2013-12-09 16:27 ` Tomasz Figa
2014-02-07 4:42 ` [PATCH 1/2 v4] " Naveen Krishna Chatradhi
[not found] ` <1391748171-12451-1-git-send-email-ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-03-12 19:18 ` Wolfram Sang
2014-04-28 8:15 ` Naveen Krishna Ch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385100726-32165-1-git-send-email-ch.naveen@samsung.com \
--to=ch.naveen@samsung.com \
--cc=ben-linux@fluff.org \
--cc=hs@denx.de \
--cc=khali@linux-fr.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=naveenkrishna.ch@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).