From: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
To: linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
Subject: [PATCH 1/5] pinctrl: r7s72100: add riic groups
Date: Tue, 17 Dec 2013 22:44:34 +0100 [thread overview]
Message-ID: <1387316678-10174-2-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1387316678-10174-1-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
From: Wolfram Sang <wsa-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
Tested RIIC2 on a genmai board. Other riic groups are untested but seem
trivial enough to be added.
Signed-off-by: Wolfram Sang <wsa-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
Acked-by: Magnus Damm <damm-yzvPICuk2ACczHhG9Qg4qA@public.gmane.org>
---
Note: With the current PFC driver as posted by Magnus, it needs another patch
to work. Yet, I think this is a seperate PFC issue which needs to be sorted out
seperately and shouldn't affect these declarations. I'll add the needed patch
as a response to this mail.
drivers/pinctrl/sh-pfc/pfc-r7s72100.c | 45 +++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r7s72100.c b/drivers/pinctrl/sh-pfc/pfc-r7s72100.c
index a662876..2b716d1 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r7s72100.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r7s72100.c
@@ -229,6 +229,27 @@ SCIF5(RZ_PIN_AND_MUX)
SCIF6(RZ_PIN_AND_MUX)
SCIF7(RZ_PIN_AND_MUX)
+#define RIIC0(fn) \
+ fn(riic0, scl, 1, 0, 1) \
+ fn(riic0, sda, 1, 1, 1)
+
+#define RIIC1(fn) \
+ fn(riic1, scl, 1, 2, 1) \
+ fn(riic1, sda, 1, 3, 1)
+
+#define RIIC2(fn) \
+ fn(riic2, scl, 1, 4, 1) \
+ fn(riic2, sda, 1, 5, 1)
+
+#define RIIC3(fn) \
+ fn(riic3, scl, 1, 6, 1) \
+ fn(riic3, sda, 1, 7, 1)
+
+RIIC0(RZ_PIN_AND_MUX)
+RIIC1(RZ_PIN_AND_MUX)
+RIIC2(RZ_PIN_AND_MUX)
+RIIC3(RZ_PIN_AND_MUX)
+
static const struct sh_pfc_pin_group pinmux_groups[] = {
SCIF0(RZ_PMX_GROUP)
SCIF1(RZ_PMX_GROUP)
@@ -238,6 +259,10 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SCIF5(RZ_PMX_GROUP)
SCIF6(RZ_PMX_GROUP)
SCIF7(RZ_PMX_GROUP)
+ RIIC0(RZ_PMX_GROUP)
+ RIIC1(RZ_PMX_GROUP)
+ RIIC2(RZ_PMX_GROUP)
+ RIIC3(RZ_PMX_GROUP)
};
static const char * const scif0_groups[] = {
@@ -272,6 +297,22 @@ static const char * const scif7_groups[] = {
SCIF7(RZ_GROUPS)
};
+static const char * const riic0_groups[] = {
+ RIIC0(RZ_GROUPS)
+};
+
+static const char * const riic1_groups[] = {
+ RIIC1(RZ_GROUPS)
+};
+
+static const char * const riic2_groups[] = {
+ RIIC2(RZ_GROUPS)
+};
+
+static const char * const riic3_groups[] = {
+ RIIC3(RZ_GROUPS)
+};
+
static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(scif0),
SH_PFC_FUNCTION(scif1),
@@ -281,6 +322,10 @@ static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(scif5),
SH_PFC_FUNCTION(scif6),
SH_PFC_FUNCTION(scif7),
+ SH_PFC_FUNCTION(riic0),
+ SH_PFC_FUNCTION(riic1),
+ SH_PFC_FUNCTION(riic2),
+ SH_PFC_FUNCTION(riic3),
};
#define PFC_REG(idx, name, reg) \
--
1.8.4.2
next prev parent reply other threads:[~2013-12-17 21:44 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 21:44 [PATCH 0/5] arm: shmobile: r7s72100: add native i2c support Wolfram Sang
2013-12-17 21:44 ` [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks Wolfram Sang
2013-12-18 11:38 ` Sergei Shtylyov
[not found] ` <52B1892B.1020806-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2013-12-18 11:43 ` Wolfram Sang
2013-12-18 11:53 ` Sergei Shtylyov
2013-12-18 12:15 ` Wolfram Sang
2013-12-18 13:49 ` Simon Horman
[not found] ` <20131218134914.GA32664-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2013-12-18 14:02 ` Sergei Shtylyov
[not found] ` <52B1AAE6.2020400-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2013-12-18 14:44 ` Magnus Damm
2013-12-18 15:13 ` Sergei Shtylyov
2013-12-18 21:00 ` Wolfram Sang
2013-12-17 21:44 ` [PATCH 4/5] arm: shmobile: genmai: adapt dts to use native i2c driver Wolfram Sang
[not found] ` <1387316678-10174-5-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
2013-12-17 21:57 ` Laurent Pinchart
2013-12-18 11:41 ` Sergei Shtylyov
[not found] ` <1387316678-10174-1-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
2013-12-17 21:44 ` Wolfram Sang [this message]
[not found] ` <1387316678-10174-2-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
2013-12-17 21:47 ` [PATCH 1/5] pinctrl: r7s72100: add riic groups Wolfram Sang
2013-12-17 21:48 ` Laurent Pinchart
2013-12-17 21:44 ` [PATCH 3/5] arm: shmobile: r7s72100: add nodes for i2c controllers to dtsi Wolfram Sang
2013-12-17 21:55 ` Laurent Pinchart
2013-12-17 22:13 ` Wolfram Sang
2013-12-17 22:16 ` Laurent Pinchart
2013-12-17 21:44 ` [PATCH 5/5] i2c: riic: add driver Wolfram Sang
2013-12-18 8:42 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387316678-10174-2-git-send-email-wsa@the-dreams.de \
--to=wsa-z923lk4zbo2bacvfa/9k2g@public.gmane.org \
--cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).