[PATCH v2 09/10] mfd: cros_ec: ec_dev->cmd_xfer() returns number of bytes received from EC

[Doug Anderson <dianders@chromium.org>]

From: Bill Richardson <wfrichar@chromium.org>

When communicating with the EC, the cmd_xfer() function should return the
number of bytes it received from the EC, or negative on error.

Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
Changes in v2: None

 drivers/i2c/busses/i2c-cros-ec-tunnel.c | 2 +-
 drivers/mfd/cros_ec_i2c.c               | 2 +-
 drivers/mfd/cros_ec_spi.c               | 2 +-
 include/linux/mfd/cros_ec.h             | 8 ++++----
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index dd07818..05e033c 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -228,7 +228,7 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
 	msg.insize = response_len;
 
 	result = bus->ec->cmd_xfer(bus->ec, &msg);
-	if (result)
+	if (result < 0)
 		goto exit;
 
 	result = ec_i2c_parse_response(response, i2c_msgs, &num);
diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
index 189e7d1..fd7a546 100644
--- a/drivers/mfd/cros_ec_i2c.c
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -111,7 +111,7 @@ static int cros_ec_cmd_xfer_i2c(struct cros_ec_device *ec_dev,
 		goto done;
 	}
 
-	ret = 0;
+	ret = i2c_msg[1].buf[1];
  done:
 	kfree(in_buf);
 	kfree(out_buf);
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index c975087..2ad6815 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -324,7 +324,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 		goto exit;
 	}
 
-	ret = 0;
+	ret = len;
 exit:
 	mutex_unlock(&ec_spi->lock);
 	return ret;
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 1f79f16..0ebf26f 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -41,7 +41,7 @@ enum {
  * @outdata: Outgoing data to EC
  * @outsize: Outgoing length in bytes
  * @indata: Where to put the incoming data from EC
- * @insize: Incoming length in bytes (filled in by EC)
+ * @insize: Max number of bytes to accept from EC
  * @result: EC's response to the command (separate from communication failure)
  */
 struct cros_ec_command {
@@ -64,9 +64,9 @@ struct cros_ec_command {
  * sleep at the last suspend
  * @event_notifier: interrupt event notifier for transport devices
  * @cmd_xfer: send command to EC and get response
- *     Returns 0 if the communication succeeded, but that doesn't mean the EC
- *     was happy with the command it got. Caller should check msg.result for
- *     the EC's result code.
+ *     Returns the number of bytes received if the communication succeeded, but
+ *     that doesn't mean the EC was happy with the command. The caller
+ *     should check msg.result for the EC's result code.
  *
  * @priv: Private data
  * @irq: Interrupt to use
-- 
2.0.0.526.g5318336