From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yuan Yao Subject: [PATCH v5 2/2] Documentation:add DMA support for freescale i2c driver Date: Wed, 23 Jul 2014 16:24:43 +0800 Message-ID: <1406103883-3572-3-git-send-email-yao.yuan@freescale.com> References: <1406103883-3572-1-git-send-email-yao.yuan@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1406103883-3572-1-git-send-email-yao.yuan@freescale.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: wsa@the-dreams.de, marex@denx.de Cc: mark.rutland@arm.com, shawn.guo@linaro.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org List-Id: linux-i2c@vger.kernel.org Add i2c dts node properties for eDMA support, them depend on the eDMA driver. Signed-off-by: Yuan Yao --- Documentation/devicetree/bindings/i2c/i2c-imx.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt index 4a8513e..52d37fd 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt @@ -11,6 +11,8 @@ Required properties: Optional properties: - clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz. The absence of the propoerty indicates the default frequency 100 kHz. +- dmas: A list of two dma specifiers, one for each entry in dma-names. +- dma-names: should contain "tx" and "rx". Examples: @@ -26,3 +28,12 @@ i2c@70038000 { /* HS-I2C on i.MX51 */ interrupts = <64>; clock-frequency = <400000>; }; + +i2c0: i2c@40066000 { /* i2c0 on vf610 */ + compatible = "fsl,vf610-i2c"; + reg = <0x40066000 0x1000>; + interrupts =<0 71 0x04>; + dmas = <&edma0 0 50>, + <&edma0 0 51>; + dma-names = "rx","tx"; +}; -- 1.8.4