From: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
Geert Uytterhoeven
<geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
Subject: [RFC 1/2] i2c: sh_mobile: refactor DMA setup
Date: Wed, 10 Dec 2014 14:21:48 +0100 [thread overview]
Message-ID: <1418217709-26392-2-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1418217709-26392-1-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
From: Wolfram Sang <wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
Refactor DMA setup to keep the errno so we can implement better
deferred probe support in the next step.
Signed-off-by: Wolfram Sang <wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
---
drivers/i2c/busses/i2c-sh_mobile.c | 35 ++++++++++++++++-------------------
1 file changed, 16 insertions(+), 19 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index b9c8cf2aac2c..636f2297143a 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -552,7 +552,7 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
dma_addr_t dma_addr;
dma_cookie_t cookie;
- if (!chan)
+ if (IS_ERR(chan))
return;
dma_addr = dma_map_single(chan->device->dev, pd->msg->buf, pd->msg->len, dir);
@@ -749,21 +749,18 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
-static int sh_mobile_i2c_request_dma_chan(struct device *dev, enum dma_transfer_direction dir,
- dma_addr_t port_addr, struct dma_chan **chan_ptr)
+static struct dma_chan *sh_mobile_i2c_request_dma_chan(struct device *dev,
+ enum dma_transfer_direction dir, dma_addr_t port_addr)
{
struct dma_chan *chan;
struct dma_slave_config cfg;
char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx";
int ret;
- *chan_ptr = NULL;
-
chan = dma_request_slave_channel_reason(dev, chan_name);
if (IS_ERR(chan)) {
- ret = PTR_ERR(chan);
dev_dbg(dev, "request_channel failed for %s (%d)\n", chan_name, ret);
- return ret;
+ return chan;
}
memset(&cfg, 0, sizeof(cfg));
@@ -780,25 +777,23 @@ static int sh_mobile_i2c_request_dma_chan(struct device *dev, enum dma_transfer_
if (ret) {
dev_dbg(dev, "slave_config failed for %s (%d)\n", chan_name, ret);
dma_release_channel(chan);
- return ret;
+ return ERR_PTR(ret);
}
- *chan_ptr = chan;
-
dev_dbg(dev, "got DMA channel for %s\n", chan_name);
- return 0;
+ return chan;
}
static void sh_mobile_i2c_release_dma(struct sh_mobile_i2c_data *pd)
{
- if (pd->dma_tx) {
+ if (!IS_ERR(pd->dma_tx)) {
dma_release_channel(pd->dma_tx);
- pd->dma_tx = NULL;
+ pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
}
- if (pd->dma_rx) {
+ if (!IS_ERR(pd->dma_rx)) {
dma_release_channel(pd->dma_rx);
- pd->dma_rx = NULL;
+ pd->dma_rx = ERR_PTR(-EPROBE_DEFER);
}
}
@@ -891,13 +886,15 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
/* Init DMA */
sg_init_table(&pd->sg, 1);
pd->dma_direction = DMA_NONE;
- ret = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_DEV_TO_MEM,
- res->start + ICDR, &pd->dma_rx);
+ pd->dma_rx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_DEV_TO_MEM,
+ res->start + ICDR);
+ ret = PTR_ERR(pd->dma_rx);
if (ret == -EPROBE_DEFER)
return ret;
- ret = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_MEM_TO_DEV,
- res->start + ICDR, &pd->dma_tx);
+ pd->dma_tx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_MEM_TO_DEV,
+ res->start + ICDR);
+ ret = PTR_ERR(pd->dma_tx);
if (ret == -EPROBE_DEFER) {
sh_mobile_i2c_release_dma(pd);
return ret;
--
2.1.3
next prev parent reply other threads:[~2014-12-10 13:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-10 13:21 [RFC 0/2] i2c: sh_mobile: don't regress on deferred probing Wolfram Sang
[not found] ` <1418217709-26392-1-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
2014-12-10 13:21 ` Wolfram Sang [this message]
2014-12-10 19:06 ` [RFC 1/2] i2c: sh_mobile: refactor DMA setup Sergei Shtylyov
2014-12-16 11:34 ` Wolfram Sang
2014-12-16 21:06 ` Sergei Shtylyov
2014-12-10 13:49 ` [RFC 0/2] i2c: sh_mobile: don't regress on deferred probing Geert Uytterhoeven
2014-12-10 14:19 ` Wolfram Sang
2014-12-10 13:21 ` [RFC 2/2] i2c: sh_mobile: rework " Wolfram Sang
2014-12-10 13:44 ` Geert Uytterhoeven
2014-12-16 11:35 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418217709-26392-2-git-send-email-wsa@the-dreams.de \
--to=wsa-z923lk4zbo2bacvfa/9k2g@public.gmane.org \
--cc=geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org \
--cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).