From: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David Cohen
<david.a.cohen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Jarkko Nikula
<jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: Andy Shevchenko
<andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCH v2 2/4] i2c: designware-pci: shrink dw_pci_controllers array
Date: Fri, 23 Jan 2015 13:54:03 +0200 [thread overview]
Message-ID: <1422014045-20584-2-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1422014045-20584-1-git-send-email-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
There is no need to duplicate same data for each controller. If we need
specific stuff for a certain controller in the future we may add it later. The
patch leaves one controller per platform.
Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/i2c/busses/i2c-designware-pcidrv.c | 63 ++++++------------------------
1 file changed, 11 insertions(+), 52 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 5c6fca7..435a8ec 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -40,13 +40,7 @@
#define DRIVER_NAME "i2c-designware-pci"
enum dw_pci_ctl_id_t {
- medfield_0,
- medfield_1,
- medfield_2,
- medfield_3,
- medfield_4,
- medfield_5,
-
+ medfield,
baytrail,
haswell,
};
@@ -98,47 +92,12 @@ static struct dw_scl_sda_cfg hsw_config = {
};
static struct dw_pci_controller dw_pci_controllers[] = {
- [medfield_0] = {
- .bus_num = 0,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [medfield_1] = {
- .bus_num = 1,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [medfield_2] = {
- .bus_num = 2,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [medfield_3] = {
- .bus_num = 3,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [medfield_4] = {
- .bus_num = 4,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [medfield_5] = {
- .bus_num = 5,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ [medfield] = {
+ .bus_num = -1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
- .clk_khz = 25000,
+ .clk_khz = 25000,
},
[baytrail] = {
.bus_num = -1,
@@ -301,12 +260,12 @@ MODULE_ALIAS("i2c_designware-pci");
static const struct pci_device_id i2_designware_pci_ids[] = {
/* Medfield */
- { PCI_VDEVICE(INTEL, 0x0817), medfield_3,},
- { PCI_VDEVICE(INTEL, 0x0818), medfield_4 },
- { PCI_VDEVICE(INTEL, 0x0819), medfield_5 },
- { PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
- { PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
- { PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+ { PCI_VDEVICE(INTEL, 0x0817), medfield },
+ { PCI_VDEVICE(INTEL, 0x0818), medfield },
+ { PCI_VDEVICE(INTEL, 0x0819), medfield },
+ { PCI_VDEVICE(INTEL, 0x082c), medfield },
+ { PCI_VDEVICE(INTEL, 0x082d), medfield },
+ { PCI_VDEVICE(INTEL, 0x082e), medfield },
/* Baytrail */
{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
--
2.1.4
next prev parent reply other threads:[~2015-01-23 11:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 11:54 [PATCH v2 1/4] i2c: designware-pci: remove Moorestown support Andy Shevchenko
[not found] ` <1422014045-20584-1-git-send-email-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-01-23 11:54 ` Andy Shevchenko [this message]
[not found] ` <1422014045-20584-2-git-send-email-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-01-23 12:41 ` [PATCH v2 2/4] i2c: designware-pci: shrink dw_pci_controllers array Wolfram Sang
2015-01-23 12:48 ` Mika Westerberg
[not found] ` <20150123124805.GP1850-3PARRvDOhMZrdx17CPfAsdBPR1lH4CV8@public.gmane.org>
2015-01-23 13:04 ` Andy Shevchenko
[not found] ` <1422018246.31903.162.camel-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-01-24 4:19 ` Wolfram Sang
2015-01-26 12:15 ` Wolfram Sang
2015-02-05 19:21 ` Wolfram Sang
2015-02-05 22:56 ` David Cohen
[not found] ` <20150205225651.GA1022-UmZa8NLUsbhHELxPJs4m+1DQ4js95KgL@public.gmane.org>
2015-02-06 10:50 ` Andy Shevchenko
2015-01-23 11:54 ` [PATCH v2 3/4] i2c: designware-pci: no need to provide clk_khz Andy Shevchenko
[not found] ` <1422014045-20584-3-git-send-email-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-01-23 14:36 ` Wolfram Sang
2015-01-23 11:54 ` [PATCH v2 4/4] i2c: designware-pci: update Intel copyright line Andy Shevchenko
2015-01-23 14:35 ` [PATCH v2 1/4] i2c: designware-pci: remove Moorestown support Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422014045-20584-2-git-send-email-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=david.a.cohen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).