From: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
Geert Uytterhoeven
<geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>,
Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
Ian Molton <ian.molton-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
Subject: [PATCH v2 4/5] ARM: shmobile: emev2: add IIC cores to dtsi
Date: Sat, 11 Jul 2015 09:46:25 +0200 [thread overview]
Message-ID: <1436600786-3068-5-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1436600786-3068-1-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
From: Wolfram Sang <wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
Signed-off-by: Wolfram Sang <wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
---
arch/arm/boot/dts/emev2.dtsi | 48 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index bb45694d91bc1e..edad0c4eea3505 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -21,6 +21,8 @@
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
+ i2c0 = &iic0;
+ i2c1 = &iic1;
};
cpus {
@@ -66,6 +68,30 @@
clock-frequency = <32768>;
#clock-cells = <0>;
};
+ iic0_sclkdiv: iic0_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x624 0>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ iic0_sclk: iic0_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x48c 1>;
+ clocks = <&iic0_sclkdiv>;
+ #clock-cells = <0>;
+ };
+ iic1_sclkdiv: iic1_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x624 16>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ iic1_sclk: iic1_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x490 1>;
+ clocks = <&iic1_sclkdiv>;
+ #clock-cells = <0>;
+ };
pll3_fo: pll3_fo {
compatible = "fixed-factor-clock";
clocks = <&c32ki>;
@@ -234,4 +260,26 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ iic0: i2c@e0070000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-emev2";
+ reg = <0xe0070000 0x28>;
+ interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&iic0_sclk>;
+ clock-names = "sclk";
+ status = "disabled";
+ };
+
+ iic1: i2c@e10a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-emev2";
+ reg = <0xe10a0000 0x28>;
+ interrupts = <0 33 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&iic1_sclk>;
+ clock-names = "sclk";
+ status = "disabled";
+ };
};
--
2.1.4
next prev parent reply other threads:[~2015-07-11 7:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-11 7:46 [PATCH v2 0/5] enable I2C on Renesas EMEV2 and KZM9D board Wolfram Sang
[not found] ` <1436600786-3068-1-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
2015-07-11 7:46 ` [PATCH v2 1/5] clk: shmobile: emev2: deassert reset for IIC0/1 Wolfram Sang
2015-07-11 7:46 ` [PATCH v2 3/5] i2c: emev2: add driver Wolfram Sang
2015-07-11 10:03 ` Wolfram Sang
2015-07-12 21:12 ` Laurent Pinchart
2015-07-11 7:46 ` Wolfram Sang [this message]
2015-07-11 7:46 ` [PATCH v2 5/5] ARM: shmobile: emev2: kzm9d: enable IIC busses Wolfram Sang
2015-07-11 7:46 ` [PATCH v2 2/5] i2c: emev2: add binding documentation Wolfram Sang
2015-07-14 11:18 ` [PATCH v2 0/5] enable I2C on Renesas EMEV2 and KZM9D board Wolfram Sang
2015-07-15 0:12 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436600786-3068-5-git-send-email-wsa@the-dreams.de \
--to=wsa-z923lk4zbo2bacvfa/9k2g@public.gmane.org \
--cc=geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org \
--cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=ian.molton-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).