linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sifan Naeem <sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
To: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
	James Hogan <james.hogan-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>,
	linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sifan Naeem <sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>,
	"Stable kernel (v3.19+)"
	<stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH 1/8] i2c: img-scb: enable fencing for all versions of the ip
Date: Mon, 27 Jul 2015 12:47:14 +0100	[thread overview]
Message-ID: <1437997641-32575-2-git-send-email-sifan.naeem@imgtec.com> (raw)
In-Reply-To: <1437997641-32575-1-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>

The code to read from the master read fifo, and write to the master
write fifo, checks a bit in an SCB register before every byte to
ensure that the fifo is not full (write fifo) or empty (read fifo).
Due to clock domain crossing inside the SCB block the updated value
of this bit is only visible after 2 cycles.

The scb_wr_rd_fence() function does 2 dummy writes (to the read-only
revision register), and it's called before reading from or writing to the
fifos to ensure that subsequent reads of the fifo status bits do not read
stale values.

As the 2 dummy writes are required in all versions of the ip, the version
check is dropped.

Fixes: 27bce4 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver")
Signed-off-by: Sifan Naeem <sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Cc: Stable kernel (v3.19+) <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
---
 drivers/i2c/busses/i2c-img-scb.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 00ffd66..5c3c615 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -278,8 +278,6 @@
 #define ISR_COMPLETE(err)	(ISR_COMPLETE_M | (ISR_STATUS_M & (err)))
 #define ISR_FATAL(err)		(ISR_COMPLETE(err) | ISR_FATAL_M)
 
-#define REL_SOC_IP_SCB_2_2_1	0x00020201
-
 enum img_i2c_mode {
 	MODE_INACTIVE,
 	MODE_RAW,
@@ -1120,10 +1118,8 @@ static int img_i2c_init(struct img_i2c *i2c)
 		return -EINVAL;
 	}
 
-	if (rev == REL_SOC_IP_SCB_2_2_1) {
-		i2c->need_wr_rd_fence = true;
-		dev_info(i2c->adap.dev.parent, "fence quirk enabled");
-	}
+	/* Fencing enabled by default. */
+	i2c->need_wr_rd_fence = true;
 
 	bitrate_khz = i2c->bitrate / 1000;
 	clk_khz = clk_get_rate(i2c->scb_clk) / 1000;
-- 
1.7.9.5

  parent reply	other threads:[~2015-07-27 11:47 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-27 11:47 [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio Sifan Naeem
2015-07-27 11:47 ` [PATCH 2/8] i2c: img-scb: do dummy writes before fifo access Sifan Naeem
2015-07-27 11:47 ` [PATCH 5/8] i2c: img-scb: reset interrupts in img_i2c_soft_reset Sifan Naeem
     [not found]   ` <1437997641-32575-6-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-28 11:35     ` James Hogan
2015-07-28 11:46       ` Sifan Naeem
2015-07-28 11:51         ` James Hogan
2015-07-27 11:47 ` [PATCH 6/8] i2c: img-scb: remove start bit detected status after handling Sifan Naeem
2015-07-28 13:53   ` James Hogan
2015-07-29 12:49     ` Sifan Naeem
2015-07-27 11:47 ` [PATCH 7/8] i2c: img-scb: improve transaction complete handle Sifan Naeem
     [not found]   ` <1437997641-32575-8-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-29 12:22     ` James Hogan
     [not found]       ` <55B8C56A.7050102-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-29 13:35         ` Sifan Naeem
2015-07-27 11:47 ` [PATCH 8/8] i2c: img-scb: verify support for requested bit rate Sifan Naeem
2015-07-29 12:02   ` James Hogan
2015-07-29 13:34     ` Sifan Naeem
     [not found] ` <1437997641-32575-1-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-27 11:47   ` Sifan Naeem [this message]
2015-07-27 20:20     ` [PATCH 1/8] i2c: img-scb: enable fencing for all versions of the ip James Hogan
2015-07-28  9:26       ` Sifan Naeem
2015-07-28  9:38         ` James Hogan
2015-07-27 11:47   ` [PATCH 3/8] i2c: img-scb: use DIV_ROUND_UP to round divisor values Sifan Naeem
     [not found]     ` <1437997641-32575-4-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-28 10:45       ` James Hogan
2015-07-27 11:47   ` [PATCH 4/8] i2c: img-scb: fix LOW and HIGH period values for the SCL clock Sifan Naeem
2015-07-28 11:27     ` James Hogan
2015-07-31 11:12   ` [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio Wolfram Sang
2015-09-07 13:41     ` Ezequiel Garcia
     [not found]       ` <CAAEAJfCW9cEMDZwta5Q6VVEZfzxTDZ50Fx=YeW6bPMnrtKNcbw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-09-07 13:50         ` Wolfram Sang
2015-09-07 14:22           ` Ezequiel Garcia
     [not found]             ` <CAAEAJfBj+qdv58gzOnqMrmN0486Enzbn3G1L0KhMctMkEkXfTw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-09-07 21:13               ` i2ctransfer (Was: [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio) Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437997641-32575-2-git-send-email-sifan.naeem@imgtec.com \
    --to=sifan.naeem-1axoqhu6uovqt0dzr+alfa@public.gmane.org \
    --cc=james.hogan-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).