From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sifan Naeem Subject: [PATCH 4/8] i2c: img-scb: fix LOW and HIGH period values for the SCL clock Date: Mon, 27 Jul 2015 12:47:17 +0100 Message-ID: <1437997641-32575-5-git-send-email-sifan.naeem@imgtec.com> References: <1437997641-32575-1-git-send-email-sifan.naeem@imgtec.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1437997641-32575-1-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Wolfram Sang , James Hogan , linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Sifan Naeem , "Stable kernel (v3.19+)" List-Id: linux-i2c@vger.kernel.org After determining the minimum value for the High period (TCKH) the remainder of the internal clock pulses is set as the Low period (TCKL). This causes the i2c clock duty cycle to be much less than 50%. The fix suggested here, start with TCKH and TCKL at 50% of the internal clock pulses and adjusts the TCKH and TCKL values from there if the minimum value for TCKL is not met. This will make sure the i2c clock duty cycle is at 50% or close 50% whenever possible. Fixes: 27bce4 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver") Signed-off-by: Sifan Naeem Cc: Stable kernel (v3.19+) --- drivers/i2c/busses/i2c-img-scb.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index b4f59e1..51a5be8 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -1178,25 +1178,29 @@ static int img_i2c_init(struct img_i2c *i2c) ((bitrate_khz * clk_period) / 2)) int_bitrate++; - /* Setup TCKH value */ - tckh = DIV_ROUND_UP(timing.tckh, clk_period); + /* + * Setup clock duty cycle, start with 50% and adjust TCKH and TCKL + * values from there if they don't meet minimum timing requirements + */ + tckh = int_bitrate / 2; + tckl = int_bitrate - tckh; - if (tckh > 0) - data = tckh - 1; - else - data = 0; + /* Adjust TCKH and TCKL values */ + data = DIV_ROUND_UP(timing.tckl, clk_period); - img_i2c_writel(i2c, SCB_TIME_TCKH_REG, data); + if (tckl < data) { + tckl = data; + tckh = int_bitrate - tckl; + } - /* Setup TCKL value */ - tckl = int_bitrate - tckh; + if (tckh > 0) + --tckh; if (tckl > 0) - data = tckl - 1; - else - data = 0; + --tckl; - img_i2c_writel(i2c, SCB_TIME_TCKL_REG, data); + img_i2c_writel(i2c, SCB_TIME_TCKH_REG, tckh); + img_i2c_writel(i2c, SCB_TIME_TCKL_REG, tckl); /* Setup TSDH value */ tsdh = DIV_ROUND_UP(timing.tsdh, clk_period); -- 1.7.9.5