[PATCH] i2c: designware: Make debug print in i2c_dw_isr() shorter

[Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>]

Printing adapter name is irrelevant from this debug print and makes output
needlessly long. Having already device and functions names printed here is
enough for debugging.

While at it remove extra space from "enabled= 0x" and use "%#x" for
printing "0x" prefixed hexadecimal values.

Signed-off-by: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
This is my previous "[PATCH 1/2] i2c: designware: Remove space between
variable and its value in debug print" and "[PATCH 2/2] i2c: designware:
Remove adapter name from debug print in i2c_dw_isr()" squashed.
---
 drivers/i2c/busses/i2c-designware-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 6f19a33773fe..cc98b2a75591 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -777,8 +777,8 @@ irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 
 	enabled = dw_readl(dev, DW_IC_ENABLE);
 	stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
-	dev_dbg(dev->dev, "%s:  %s enabled= 0x%x stat=0x%x\n", __func__,
-		dev->adapter.name, enabled, stat);
+	dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__,
+		enabled, stat);
 	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
 		return IRQ_NONE;
 
-- 
2.4.6