[PATCH v3 3/7] i2c: img-scb: use DIV_ROUND_UP to round divisor values

[Sifan Naeem <sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>]

Using % can be slow depending on the architecture.

Using DIV_ROUND_UP is nicer and more efficient way to do it.

Fixes: commit 27bce457d588 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver")
Signed-off-by: Sifan Naeem <sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Acked-by: James Hogan <james.hogan-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Reviewed-by: James Hartley <james.hartley-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
---
 drivers/i2c/busses/i2c-img-scb.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 0368d91b6805..b4f59e1a5cac 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -1179,9 +1179,7 @@ static int img_i2c_init(struct img_i2c *i2c)
 		int_bitrate++;
 
 	/* Setup TCKH value */
-	tckh = timing.tckh / clk_period;
-	if (timing.tckh % clk_period)
-		tckh++;
+	tckh = DIV_ROUND_UP(timing.tckh, clk_period);
 
 	if (tckh > 0)
 		data = tckh - 1;
@@ -1201,9 +1199,7 @@ static int img_i2c_init(struct img_i2c *i2c)
 	img_i2c_writel(i2c, SCB_TIME_TCKL_REG, data);
 
 	/* Setup TSDH value */
-	tsdh = timing.tsdh / clk_period;
-	if (timing.tsdh % clk_period)
-		tsdh++;
+	tsdh = DIV_ROUND_UP(timing.tsdh, clk_period);
 
 	if (tsdh > 1)
 		data = tsdh - 1;
-- 
1.7.9.5